Yanzeo SR200 Portable Bluetooth UHF RFID Reader Writer

1. Introduzione

This manual provides instructions for the proper use and maintenance of the Yanzeo SR200 Portable Bluetooth UHF RFID Reader Writer. The SR200 is designed for efficient reading and writing of UHF RFID tags, offering connectivity via Bluetooth and USB, and is compatible with Android devices through its SDK.

2. Produttu Finituview

The Yanzeo SR200 is a compact and portable device engineered for reliable UHF RFID operations. It features a robust design and high-performance components to ensure consistent functionality.

Funzioni chjave:

• SDK Compatible with Android for application development.
• UHF frequency range: 840-960 MHz, supporting ISO/IEC18000-6B/C standards.
• Flexible connectivity options: Bluetooth for wireless communication and USB for wired connections with smartphones and computers.
• Designed with high-quality components for consistent performance.
• Batteria ricaricabile al litiu integrata.
• Reading distance up to 3 meters, influenced by tag tipu è ambiente.

Cumpunenti di u Produttu:

3. Setup

3.1 Caricà u dispusitivu

Before initial use, fully charge the SR200. Connect the device to a power source using the provided USB Type-C cable. The charging indicator light will provide status updates.

3.2 Cunnessu via Bluetooth

1. Ensure the SR200 is powered on.
2. Enable Bluetooth on your Android smartphone or compatible device.
3. Cerca available Bluetooth devices and select 'SR200' from the list.
4. Segui tutti i suggerimenti nantu à u screnu per compie u prucessu di accoppiamentu.

3.3 Cunnessione via USB

Connect the SR200 to your computer or smartphone using a USB Type-C cable. The device will be recognized as a peripheral, allowing for data transfer and power supply.

3.4 SDK Installation (for Android)

For application development, download and integrate the provided SDK for Android. Refer to the SDK documentation for detailed installation and programming instructions.

4. Operating Instructions

4.1 Accensione / spegnimentu

• Per accende: Appughjà è tene premutu u buttone d'accensione finu à chì a luce indicatrice s'illumina.
• Per spegne: tene premutu u buttone di accensione finu à chì a luce indicatrice si spegne.

4.2 Reading RFID Tags

1. Ensure the SR200 is connected to your host device (smartphone/computer).
2. Open the compatible application on your host device.
3. Point the SR200 towards the UHF RFID tag.
4. Activate the reading function via the application or the device's trigger button (if available).
5. The application will display the tag data upon successful reading.

4.3 Writing RFID Tags

Writing data to RFID tags requires a compatible application and specific tag types that support writing. Refer to your application's instructions and the SDK documentation for details on writing procedures.

5. Mantenimentu

5.1 Pulizia

Wipe the device with a soft, dry cloth. Avoid using abrasive cleaners, solvents, or harsh chemicals that could damage the device's surface or internal components.

5.2 Cura di a batteria

• Evitate di scaricà cumpletamente a batteria spessu.
• Conservate u dispusitivu in un locu frescu è asciuttu quandu ùn hè micca adupratu per periodi prolungati.
• Caricate u dispusitivu periodicamente s'ellu hè almacenatu per un bellu pezzu per mantene a salute di a batteria.

5.3 Storage

Store the SR200 in a clean, dry environment away from extreme temperatures, direct sunlight, and high humidity. Keep it protected from physical impact.

6. Risoluzione di prublemi

6.1 U dispusitivu ùn s'accende micca

• Ensure the battery is charged. Connect the device to a power source and allow it to charge for at least 30 minutes before attempting to power on again.
• Verify the power button is being pressed correctly and held for the required duration.

6.2 Impossibile di cunnette si via Bluetooth

• Confirm Bluetooth is enabled on both the SR200 and the host device.
• Ensure the SR200 is within the effective range of the host device.
• Pruvate à disaccoppià è à riaccoppià u dispusitivu.
• Restart both the SR200 and the host device.

6.3 Unable to Read RFID Tags

• Check if the SR200 is properly connected to the host device and the application is running.
• Ensure the RFID tags are within the reading range (up to 3 meters, but can vary).
• Verificate chì u tags are UHF RFID tags compatible with the 840-960 MHz frequency.
• Environmental factors (e.g., metal objects, other RF interference) can affect reading performance. Try reading in a different location.

7. Specificazioni

8. Garanzia è Support

For warranty information, please refer to the documentation provided with your purchase or contact Yanzeo customer support directly. A detailed user manual in PDF format is also available for download: Yanzeo SR200 User Manual (PDF).