1. Introduzione è Overview
The RCF ART 935-A is a high-performance digital 2-way active speaker designed for intensive audio applications. It combines advanced transducer technology with a powerful amplifier to deliver exceptional sound quality and versatility.
Figura 1.1: Fronte view of the RCF ART 935-A active speaker, showcasing its robust black enclosure and front grille.
E caratteristiche chjave includenu:
- Up to 133 dB Sound Pressure Level
- 2100W Class-D Bi-Amplificazione
- 45-20000 Hz linear frequency response
- 3" Titanium/Neodymium Compression Driver
- 15" Woofer
- FiRPHASE zero degrees phase technology
- Bass Motion Control woofer excursion management
Figure 1.2: Close-up of the speaker's internal components, highlighting the 15-inch woofer and the 3-inch compression driver.
The ART 935-A is suitable for use as a stand-alone FOH system speaker, satellite with a subwoofer, stage monitor, or flown installation, offering high performance and reliability in a compact enclosure.
2. Informazioni di sicurezza
Please read and understand all safety instructions before operating the RCF ART 935-A speaker. Retain this manual for future reference.
- Sicurezza elettrica: Questa unità cuntene un vulume altutage. To prevent electrical shock, do not remove the cover. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Fonte di energia: Connect the speaker only to a power supply of the type described in this manual and marked on the unit.
- Cordone d'alimentazione: Prutegge u cordone di alimentazione da esse camminatu o pinzatu, in particulare in i tappi, i recipienti di cunvenzione, è u puntu induve esce da l'apparechju.
- Ventilazione: Assicuratevi una ventilazione adatta intornu à l'altoparlante. Ùn bluccate micca alcuna apertura di ventilazione.
- Placement: Place the speaker on a stable, level surface or mount it securely using appropriate rigging hardware. Avoid placing near heat sources or in direct sunlight.
- Prutezzione di l'udito: L'esposizione prulungata à livelli elevati di pressione sonora pò causà danni permanenti à l'audizione. Aduprate una prutezzione acustica adatta quandu utilizate l'altoparlante à volumi elevati.
- umidità: Do not expose the speaker to rain or moisture. Do not use near water.
⚠ CAUTION: TO PREVENT ELECTRICAL SHOCK DO NOT REMOVE COVER.
3. Setup
Follow these steps to set up your RCF ART 935-A speaker:
3.1 Unpacking
Carefully remove the speaker from its packaging. Inspect the unit for any signs of damage during transit. The box should contain: RCF ART 935-A Digital 2-Way Active Speaker, Power Cord, and this User Manual.
3.2 Piazzamentu fisicu è muntatura
The ART 935-A is designed for versatile placement. It can be used on a pole, flown, wall-mounted, or truss-mounted. Ensure any mounting hardware used is rated for the speaker's weight (approximately 53.2 pounds / 24.2 kg).
Figura 3.1: Side view of the speaker, illustrating its ergonomic design for handling and placement.
Figura 3.2: Bottom view, highlighting the integrated pole mount for stand placement.
3.3 Cunnessioni
Locate the input/output panel on the rear of the speaker.
Figure 3.3: Rear panel of the speaker, displaying the balanced input/link, volume control, and preset buttons.
- Cunnessione di putenza: Cunnette u cavu di alimentazione furnitu à l'entrata AC nantu à u pannellu posteriore è dopu à una presa di corrente adatta.
- Input audio: Use an XLR cable to connect your audio source (mixer, audio interface, etc.) to the "BALANCED INPUT/LINK" XLR input.
- Audio Link (Daisy Chain): If connecting multiple speakers, use an XLR cable from the "BALANCED INPUT/LINK" XLR output to the input of the next speaker.
4. Operating Instructions
Once the speaker is set up, you can begin operation.
Figura 4.1: Detailed view of the control panel, including the volume control and preset selection.
4.1 Cuntrolli è Indicatori
- Manopola VOLUME: Adjusts the overall output level of the speaker. Turn counter-clockwise for minimum volume (-∞) and clockwise for maximum volume (MAX).
- PRESETS Button: Cycles through different audio equalization presets.
- LINEARI: Flat frequency response, suitable for general use or when external EQ is applied.
- BOOST: Enhances bass and treble frequencies, often used for music playback.
- STAGE: Optimized for stagapplicazioni di monitoraghju elettronicu, riducendu l'accumulazione di bassa frequenza.
- LED SEGNALE: Illuminates when an audio signal is present at the input.
- OVERLOAD LED: Illuminates when the input signal is too high, indicating potential clipping. Reduce the input level to prevent distortion.
4.2 Accensione / spegnimentu
- Ensure the VOLUME knob is set to minimum (-∞).
- Cunnette u cordone di alimentazione.
- Flip the power switch to the "ON" position.
- Gradually increase the VOLUME to the desired level.
- To power off, reduce the VOLUME to minimum, then flip the power switch to "OFF".
5. Mantenimentu
Proper maintenance ensures the longevity and optimal performance of your RCF ART 935-A speaker.
- Pulizia: Use a soft, dry cloth to clean the exterior of the speaker. Do not use abrasive cleaners, solvents, or waxes. For the grille, a soft brush or vacuum cleaner can be used to remove dust.
- Ispezione: Periodically check all cables for damage. Ensure all connections are secure.
- Conservazione: When not in use for extended periods, store the speaker in a dry, cool environment, ideally in its original packaging or a protective case.
- Nisuna Parti Serviceable d'Usuariu: Do not attempt to open the speaker enclosure. All internal servicing must be performed by qualified RCF service personnel.
6. Risoluzione di prublemi
If you encounter issues with your RCF ART 935-A speaker, refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Nisuna uscita di sonu |
|
|
| Distorted sound / OVERLOAD LED lit |
|
|
| L'altoparlante ùn si accende micca |
|
|
For issues not listed here, or if the problem persists after attempting the solutions, please contact RCF customer support or an authorized service center.
7. Specificazioni
Detailed technical specifications for the RCF ART 935-A Digital 2-Way Active Speaker:
| Feature | Specificazione |
|---|---|
| Nome di mudellu | ART935-A |
| Tipu di parlante | 2-Way Active Speaker (Satellite, Woofer) |
| Amplificazione | 2100W Class-D Bi-Amplification (Peak Power) |
| Diametru di u woofer | 15 inch |
| Diametru di Tweeter | 3 Inches (Titanium/Neodymium Compression Driver) |
| Risposta di Frequency | 45-20000 Hz (linear) |
| Sound Pressure Level (Max) | Finu à 133 dB |
| Tecnulugia di cunnessione | XLR (Balanced Input/Link) |
| Metudu di cuntrollu | Voice (Presets) |
| Culore | Neru |
| Dimensioni di u produttu (L x A) | 16.34"L x 28.23"A |
| Pesu di l'articulu | 53.2 liri (24.2 chilògrammi) |
| Tipu di muntatura | Wall Mount, Pole Mount (multiple rigging points) |
| Cumpunenti inclusi | RCF ART 935-A Digital 2-Way Active Speaker, Power Cord |
| Funzioni spiciali | FiRPHASE zero degrees phase technology, Bass Motion Control woofer excursion management |
8. Garanzia è Support
The RCF ART 935-A Digital 2-Way Active Speaker comes with a RCF 3 Year Limited WarrantyPer piacè cunservate a vostra prova d'acquistu per e richieste di garanzia.
For technical support, service, or warranty inquiries, please contact RCF customer service or visit the official RCF website. Ensure you have your product model number (ART935-A) and serial number (if applicable, e.g., UDXU01335) ready when contacting support.
The serial number UDXU01335 is located on the rear panel of the speaker, near the input/output connections.
