1. Introduzione
Thank you for choosing the Ansmann LED-Band with Sensor. This manual provides essential information for the safe and efficient use of your new LED lighting product. Please read these instructions carefully before installation and operation, and retain them for future reference.
1.1 Istruzzioni di sicurità
- Stu pruduttu hè cuncipitu solu per usu in interni. Ùn espone micca à l'umidità o à temperature estreme.
- Ensure the installation surface is clean, dry, and smooth for proper adhesion.
- Ùn pruvate micca di mudificà o riparà l'apparechju. Cunfidate tutta a manutenzione à persunale qualificatu.
- Eliminate e batterie usate secondu a regulazione lucali.
- Mantene fora di a portata di i zitelli.
1.2 Cuntenuti di u pacchettu
- 1x Ansmann LED-Band (2 meters, 60 Warm-White LEDs)
- 1x Sensor Unit with integrated motion and dark sensors
- Batterie (preinstallate o incluse separatamente)
- 1x Manuale d'utilizatore
2. Produttu Finituview
The Ansmann LED-Band is a versatile, battery-powered lighting solution featuring a motion sensor and a dark sensor for automatic illumination. It is ideal for accent lighting in various indoor applications.
Figura 2.1: Ansmann LED-Band Sensor Unit. This image shows the compact sensor unit, which controls the LED strip. It features a sleek, white design with a textured surface and visible control buttons and sensor components.
Figura 2.2: Sensor Unit with Labeled Components. This image provides a detailed view of the sensor unit, highlighting key features such as the 'run time' adjustment button, 'permanent function' button, micro USB input, day/night mode switch, light sensor, and hollow plug socket for the LED strip connection.
2.1 Funzioni chjave
- Sensore di muvimentu: Automatically detects movement to activate the light.
- Dark Sensor: Ensures the light only activates in low-light conditions, conserving battery life.
- Warm-White LEDs: Provides a comfortable and inviting illumination.
- Alimentatu à batteria: Offers flexible placement without the need for power outlets.
- Adjustable Run Time: Customize how long the light stays on after activation.
- Permanent Function: Option for continuous illumination.
3. Setup
3.1 Installazione di batterie
The Ansmann LED-Band is battery-powered, and batteries are included. If replacing batteries, ensure correct polarity and use alkaline batteries for optimal performance. The battery compartment is typically located on the back or side of the sensor unit.
3.2 Mounting the LED Strip
- Preparate a superficia: Clean the desired mounting surface thoroughly to remove dust, grease, or moisture. A clean, dry, and smooth surface ensures optimal adhesion.
- Supportu adesivo amovibile: Carefully peel off the protective film from the adhesive backing on the LED strip.
- Attaccate a striscia: Press the LED strip firmly onto the prepared surface, working along its length to ensure full contact.
Figura 3.1: Peeling the adhesive backing. This image shows a hand carefully peeling the protective film from the adhesive strip on the back of the LED-Band, revealing the sticky surface for mounting.
3.3 Connecting the LED Strip to the Sensor Unit
Connect the small plug from the LED strip into the hollow plug socket on the sensor unit. Ensure a secure connection.
Figura 3.2: Full product setup. This image displays the complete Ansmann LED-Band system, showing the sensor unit connected to the flexible LED strip, ready for installation.
3.4 Cunsiderazioni di piazzamentu
- Position the sensor unit where it can effectively detect motion in the desired area.
- Ensure the light sensor is not obstructed, as this will affect its ability to detect ambient light levels.
- The LED strip can be cut at designated points (marked with a scissor icon) to fit specific lengths. Always cut only at these marked points to avoid damaging the circuit.
Figura 3.3: Cutting the LED strip. This image illustrates how to safely shorten the LED strip by cutting it at the clearly marked points, indicated by copper pads and a scissor icon.
4. Operating Instructions
The sensor unit features controls for adjusting the light's behavior.
4.1 Day/Night Mode Switch
Locate the small switch labeled 'Tag/Nacht Modus' (Day/Night Mode) or similar. This switch controls when the light sensor is active:
- Modu di ghjornu: The light will activate with motion regardless of ambient light.
- Modu di notte: The light will only activate with motion when the ambient light level is low (dark sensor active).
4.2 Run Time Adjustment ('TIME+')
The 'TIME+' button allows you to adjust how long the LED strip remains illuminated after motion is detected and then ceases. Pressing this button cycles through different preset durations. Refer to the markings on the sensor unit for specific time intervals.
4.3 Permanent Function
The button labeled 'Permanent Funktion' (Permanent Function) or similar allows for continuous illumination, bypassing the motion and dark sensors. Press this button to turn the light on permanently. Press it again to return to sensor-controlled operation.
5. Mantenimentu
5.1 Pulizia
To clean the LED strip and sensor unit, gently wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the product.
5.2 Sustituzione di batterie
When the light output diminishes or the unit stops functioning, it is time to replace the batteries. Open the battery compartment, remove the old batteries, and insert new alkaline batteries, ensuring correct polarity. Dispose of old batteries responsibly.
6. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A luce ùn accende micca. | Dead batteries, incorrect sensor mode, obstructed sensor. | Replace batteries. Check Day/Night mode switch. Ensure motion and light sensors are clear. |
| A luce ferma continuamente. | Permanent function activated, continuous motion detected. | Deactivate permanent function. Ensure no constant motion is within sensor range. |
| A luce tremola o hè debole. | Bassu putere di bateria. | Sustituite batterie. |
| LED strip does not adhere. | A superficia hè sporca o irregulare. | Clean and dry the surface thoroughly before application. |
7. Specificazioni
- Mudellu: 1600-0436
- Marca: Ansmann
- Lunghezza di a striscia LED: 2 metri
- Numero di LED: 60
- Colore di luce: Biancu Caldu
- Fonte di energia: Alimentatu da batteria (alcalina)
- Funzioni speciali: Motion Sensor, Dark Sensor
- Pesu di l'articulu: Circa 5.6 ounces (158 grammi)
- Product Dimensions (Sensor Unit): Circa 4.92 x 1.18 x 10.71 inch
- usu: Indoor decorative and specific lighting (e.g., furniture underside, kitchen, bathroom, landing, wardrobe)
8. Garanzia è Support
For warranty information, please refer to the documentation provided with your purchase or contact your retailer. Ansmann products are manufactured with high-quality materials and undergo strict quality control. For technical support or inquiries, please visit the official Ansmann websitu o cuntattate u so dipartimentu di serviziu di u cliente.
9. Dumanda Esamples
The Ansmann LED-Band is versatile and can be used in various indoor settings to provide convenient, automatic lighting.
Figura 9.1: Bathroom application. This image shows the LED-Band installed as accent lighting under a bathroom vanity and around a mirror, providing soft, warm illumination.
Figura 9.2: Wardrobe application. Here, the LED-Band is used inside a wardrobe, illuminating clothing and accessories, making it easier to find items.
Figura 9.3: Staircase application. The LED-Band is installed along a staircase, providing subtle and safe illumination for navigating steps in low light conditions.
