Manuale d'istruzzioni per u giradischi Reloop RP-7000 MK2 Direct Drive High Torque

1. Introduzione

This manual provides essential information for the safe and efficient operation of your Reloop RP-7000 MK2 Direct Drive High Torque Turntable. Please read these instructions thoroughly before using the product to ensure proper setup, optimal performance, and longevity of your equipment. Keep this manual for future reference.

2. Istruzzioni di sicurità

• Alimentazione elettrica: Connect the unit only to an AC outlet of the specified voltage. Assicuratevi chì u cavu di alimentazione ùn sia micca dannighjatu o pizzicatu.
• umidità: Do not expose the unit to rain, moisture, or excessive humidity. Avoid placing liquid-filled objects on the turntable.
• Ventilazione: Assicuratevi una ventilazione adatta intornu à l'unità. Ùn bluccate micca l'aperture di ventilazione.
• Placement: Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong magnetic fields.
• Pulizia: Disconnect the power before cleaning. Use a soft, dry cloth. Avoid liquid cleaners or solvents.
• Service : Ùn pruvate micca di fà a riparazione di l'unità da per voi. Affidate tutta a manutenzione à persunale qualificatu.

3. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli elencati quì sottu sò inclusi in u vostru pacchettu. Sè qualchì articulu manca o hè dannighjatu, cuntattate subitu u vostru rivenditore.

• Reloop RP-7000 MK2 Direct Drive High Torque Turntable (x2)
• Copertura antipolvere (x2)
• Digital Turntable Stylus Scale
• Record Care Solution
• Cavu di putenza
• Cable RCA
• Filu di Terra
• Slipmat
• Contrappesu
• Headshell with Cartridge (pre-mounted or separate, depending on region/bundle)

Figura 1: Overview of the Reloop RP-7000 MK2 turntable bundle components.

4. Setup

4.1 Unpacking and Placement

1. Eliminate cù cura tutti i cumpunenti da l'imballu. Cunservate l'imballu per un trasportu futuru.
2. Place the turntable on a flat, stable, and vibration-free surface. Ensure there is enough space for the dust cover to open fully.
3. Attach the dust cover by aligning its hinges with the slots on the turntable's rear.

Figura 2: Turntable with the dust cover in place.

4.2 Platter and Slipmat Installation

1. Carefully place the platter onto the center spindle. Ensure it sits flush.
2. Pone u slipmat sopra à u piattu.

4.3 Cunfigurazione di u bracciu è di a cartuccia

1. If not pre-mounted, attach the headshell with the cartridge to the tonearm. Secure it by turning the locking ring.
2. Avvitate u contrappesu nantu à a parte posteriore di u bracciu.
3. Equilibrà u bracciu: Rilasciate u tonearm clamp. Adjust the counterweight until the tonearm is perfectly balanced and floats horizontally.
4. Imposta a forza di tracciamentu: Return the tonearm to its rest and clamp it. Rotate the numbered ring on the counterweight to '0' without moving the counterweight itself. Then, rotate the entire counterweight to the recommended tracking force for your cartridge (typically 2-4 grams for DJ cartridges).
5. Imposta l'anti-pattinaggio: Ajustate a manopola anti-skate per currispundere à l'impostazione di forza di tracciamentu.

4.4 Using the Digital Stylus Scale

The included digital stylus scale allows for precise measurement of your cartridge's tracking force, ensuring optimal sound quality and minimizing record wear.

1. Place the stylus scale on the platter.
2. Accende a scala cù u buttone di putenza.
3. Carefully lower the stylus onto the designated measuring point on the scale.
4. Read the tracking force displayed. Adjust the tonearm's counterweight as needed until the desired force is achieved.

Figura 3: Digital Stylus Scale for precise tracking force measurement.

4.5 Cunnessioni

1. Output audio: Connect the RCA cables from the turntable's audio output to the PHONO input of your mixer or amplifier. If your mixer/amplifier does not have a PHONO input, you will need an external phono preamppiù vivu.
2. Filu di terra: Connect the ground wire from the turntable to the ground terminal on your mixer or amplificatore per riduce u ronziu.
3. putenza: Connect the power cable to the turntable and then to a suitable AC power outlet.

5. Operating Instructions

5.1 Riproduzione di basa

1. Place a record on the slipmat.
2. Select the appropriate speed (33, 45, or 78 RPM) using the speed selector buttons.
3. Press u START/STOP buttone per inizià a rotazione di u piattu.
4. Carefully lift the tonearm using the cueing lever and position the stylus over the desired groove on the record.
5. Abbassate a leva di cueing per piazzà delicatamente u stylus nantu à u discu.
6. Per fermà a riproduzione, alzate u bracciu cù a leva di cueing, rimettitelu in u supportu di u bracciu è appughjà u buttone. START/STOP buttone.

Figura 4: Turntable platter and control layout.

5.2 Pitch Control

The pitch fader allows you to adjust the playback speed (BPM) of the record. Move the fader up or down to increase or decrease the pitch. The pitch range can be selected using the range buttons (e.g., +/- 8%, 16%, 50%).

5.3 Funzione inversa

The RP-7000 MK2 features a reverse playback function. Press the REVERSE button to change the direction of platter rotation. Press it again to return to normal playback.

6. Mantenimentu

6.1 Pulizia di u giradischi

• Scollegate sempre l'alimentazione prima di pulisce.
• Use a soft, dry, lint-free cloth to wipe the surface of the turntable and dust cover.
• Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

6.2 Cura di u Stilu

• Gently brush the stylus from back to front using a soft stylus brush to remove dust and debris.
• Evitate di toccà u stylus cù e dite.

6.3 Cura di i registri

The included record care solution helps maintain the quality of your vinyl records and prolong their lifespan.

1. Apply a small amount of record care solution to a clean, soft, lint-free cloth or a dedicated record cleaning brush.
2. Gently wipe the record surface in a circular motion, following the grooves.
3. Allow the record to dry completely before playing.

Figura 5: Record Care Solution for maintaining vinyl quality.

7. Risoluzione di prublemi

8. Specificazioni

9. Garanzia è Support

Reloop products are designed for reliability and performance. For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support or service inquiries, please contact your authorized Reloop dealer or distributor.

Produttore: Reloop

Data prima dispunibule: 8 di lugliu di u 2022