Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch User Manual

1. Introduzione

This manual provides essential information for the installation, operation, and maintenance of your Hewlett Packard Enterprise Aruba 6000 12G Class4 PoE 2G/2SFP 139W Managed L3 Gigabit Ethernet Switch. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

2. Informazioni di sicurezza

Observe the following safety precautions to prevent damage to the device or injury to personnel:

• Ensure proper grounding before connecting power.
• Do not operate the device in environments exceeding 40 degrees Celsius.
• Aduprate solu l'adattatore di alimentazione è i cavi specificati.
• Evitate di bluccà l'apertura di ventilazione per prevene u surriscaldamentu.
• Ùn pruvate micca à apre o riparà l'apparechju da per voi. Affidate tutta a manutenzione à persunale qualificatu.

3. Cuntenutu di u pacchettu

Verificate chì u vostru pacchettu cuntene i seguenti elementi:

• Hewlett Packard Enterprise Aruba 6000 Switch (Model R8N89A)
• Cordone d'alimentazione
• Kit di montaggio in rack (se applicabile)
• Documentazione (Guida di avviamentu rapidu, Informazioni di sicurezza)

4. Produttu Finituview

4.1 Disposizione di u pannellu frontale

The front panel of the Aruba 6000 switch provides various ports and LED indicators for network connectivity and status monitoring.

Image: Front panel of the HPE Aruba 6000 switch, showing various ports and LED indicators.

Cumponenti di u pannellu frontale:

• PoE1 Indicator: Indicates Power over Ethernet status for the device.
• R8N89A Label: Product model number and electrical specifications (57Vmax | 0.3A).
• 2p 1G SFP Ports (15, 16): Two 1 Gigabit Small Form-Factor Pluggable ports for fiber optic connections.
• 2p 1G BASE-T Ports (13, 14): Two 1 Gigabit Ethernet ports for copper connections.
• 12p 1G BASE-T Ports (1A-12): Twelve 1 Gigabit Ethernet ports for copper connections.
• UID (Unit Identification) LED: Helps locate the switch in a rack.
• Spd (Speed) LED: Indicates port speed status.
• PoE (Power over Ethernet) LED: Indicates PoE status for individual ports.
• Aux Port: Auxiliary USB port.
• LED Mode Button: Toggles LED display modes.
• Portu di cunsola: USB-C console port for local management.
• Pulsante di reset: Resets the device to factory defaults or reboots.

4.2 Indicatori LED

The front panel LEDs provide visual status of the switch's operation:

• Spd LED:
  • Flashing: Not maximum speed.
  • Solid: Maximum speed.
• LED PoE:
  • Flashing: Fault/Over budget.
  • Solid: PoE enabled.

5. Setup

5.1 Installazione fisica

1. Montaggio in rack: Secure the switch in a standard 19-inch equipment rack using the provided rack mount kit. Ensure adequate space for airflow around the device.
2. Cunnessione di putenza: Cunnette u cavu di alimentazione à l'entrata di alimentazione di l'interruttore è dopu à una presa di corrente CA cun messa à terra.
3. Cunnessioni di Rete: Connect network cables (Ethernet or fiber) to the appropriate ports on the front panel.

5.2 Configurazione iniziale

1. Console Access: Connect a computer to the switch's console port using a USB-C cable. Use a terminal emulation program (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
2. Login: Follow the on-screen prompts to log in. Default credentials are typically provided in the Quick Start Guide.
3. Configurazione di basa: Configure essential network parameters such as IP address, subnet mask, and default gateway.

6. Operating Instructions

Once the switch is physically installed and initially configured, it will begin forwarding network traffic. For advanced configurations and management, refer to the comprehensive software configuration guide available on the Hewlett Packard Enterprise support websitu.

• Funzionalità PoE: The switch automatically detects and powers PoE-compatible devices connected to its PoE-enabled ports. Monitor PoE status via the front panel LEDs.
• Funziunalità di u Livellu 3: As a Managed L3 switch, it supports advanced routing and network segmentation features. These are configured via the command-line interface (CLI) or webinterfaccia di gestione basatu -.

7. Mantenimentu

• Pulizia: Periodically clean the exterior of the switch with a soft, dry cloth. Ensure ventilation openings are free from dust and debris.
• Actualizazioni di firmware: Regularly check the Hewlett Packard Enterprise support websitu per l'aghjurnamenti di u firmware. Mantene u firmware aggiornatu garantisce prestazioni è sicurezza ottimali.
• Backup di cunfigurazione: Regularly back up your switch configuration to an external storage device or network location.

8. Risoluzione di prublemi

Sè avete prublemi cù u vostru switch, cunsiderate i seguenti passi di risoluzione di i prublemi:

• Nisun putere: Verify the power cord is securely connected and the power outlet is functional. Check the power LED on the switch.
• Nisuna cunnessione di rete: Check cable connections, port LEDs (Spd and PoE), and ensure correct network configuration.
• U dispusitivu PoE ùn s'accende micca: Verify the device is PoE-compatible. Check the PoE LED for faults or over-budget conditions. Ensure the switch's PoE budget is not exceeded.
• Prestazione lenta: Check for network congestion, cable quality, and port speed settings. Refer to the Spd LED.
• Reset di Factory: If all else fails, press and hold the Reset button for a specified duration (refer to the Quick Start Guide for exact timing) to restore factory default settings. This will erase all configurations.

9. Specificazioni

10. Garanzia è Support

For warranty information, technical support, and additional resources, please visit the official Hewlett Packard Enterprise support website or contact their customer service. Keep your purchase receipt and product serial number handy for any support inquiries.

Hewlett Packard Enterprise Support: www.hpe.com/us/en/support.html