HIKOKI DS18DAWCZ 18V Cordless Driver Drill

Introduzione

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HIKOKI DS18DAWCZ 18V Cordless Driver Drill. The DS18DAWCZ is a compact and lightweight cordless driver drill designed for high performance and efficiency. It features a 2-speed gear system, a 20-stage clutch function, and a built-in LED light that activates when the trigger is pulled. Please read this manual thoroughly before using the tool.

Informazioni di sicurezza

Osservate sempre e precauzioni di sicurezza basiche per riduce u risicu d'incendiu, scossa elettrica è ferite persunale. Conservate stu manuale per riferimenti futuri.

• Sicurezza di l'area di travagliu: Mantene a zona di travagliu pulita è ben illuminata. E zone ingombre o scure invitanu l'accidenti. Ùn aduprate micca l'utensili elettrici in atmosfere esplosive, cum'è in presenza di liquidi, gas o polveri inflammabili.
• Sicurezza elettrica: Evitate u cuntattu di u corpu cù superfici messe à terra o à terra cum'è tubi, radiatori, cucine è frigoriferi. Ùn espone micca l'utensili elettrici à a pioggia o à e cundizioni umide.
• Sicurezza persunale: Purtate sempre una prutezzione per l'ochji. Aduprate una prutezzione per l'uditu quandu aduprate l'utensile per periodi prolungati. Vestitevi currettamente; evitate vestiti larghi o gioielli. Assicurate i capelli lunghi.
• Uso è cura di l'arnesi: Ùn furzate micca l'utensile elettricu. Aduprate l'utensile elettricu currettu per a vostra applicazione. Scollegate a batteria da l'utensile elettricu prima di fà qualsiasi aghjustamentu, cambià accessori o almacenà l'utensili elettrichi.
• Usu è cura di a batteria: Ricaricate solu cù u caricatore specificatu da u fabricatore. Ùn aduprate micca batterie cù altri strumenti elettrici. Quandu a batteria ùn hè micca in usu, tenetela luntanu da altri oggetti metallichi.

Cuntenutu di u pacchettu

Verificate chì tutti l'articuli sò presenti à u mumentu di u disimballaggio:

• HIKOKI DS18DAWCZ Cordless Driver Drill
• 18V Lithium-ion Batteries (2 included)
• Caricatore di batterie
• Driver Bit
• Carry Case

Istituisci

1. Charging the Battery

Before first use, fully charge the battery pack. Insert the battery pack into the charger, ensuring it clicks into place. The charger indicator light will show the charging status. Once fully charged, remove the battery from the charger.

2. Installazione/Rimozione di a Batteria

To install the battery, slide it into the base of the drill handle until it locks securely. To remove, press the battery release button (usually located at the front or sides of the battery) and slide the battery out.

3. Installazione/Rimozione di punte di trapano o punte di cacciavite

The HIKOKI DS18DAWCZ features a 13mm keyless chuck for quick and easy bit changes. To install a bit, rotate the chuck counter-clockwise to open the jaws. Insert the bit fully into the chuck, then rotate the chuck clockwise to tighten the jaws firmly around the bit. Ensure the bit is centered and secure before operation. To remove, rotate the chuck counter-clockwise to loosen and pull the bit out.

Istruzzioni di funziunamentu

1. Accensione/spegnimentu è trigger à velocità variabile

The drill is activated by pressing the trigger switch. The speed of the drill is variable and controlled by the amount of pressure applied to the trigger. Pressing lightly results in lower speed, while pressing fully results in maximum speed. Release the trigger to turn the drill off.

2. Forward/Reverse Rotation Switch

A switch located above the trigger controls the direction of rotation. Push the switch to the left for forward (clockwise) rotation, suitable for drilling and driving screws. Push it to the right for reverse (counter-clockwise) rotation, used for removing screws or freeing a jammed drill bit. Ensure the switch is in the desired position before starting the drill.

3. 2-Speed Gear Selector

The drill features a 2-speed gear selector switch located on top of the tool. Position '1' provides lower speed and higher torque, ideal for driving screws and drilling larger holes. Position '2' provides higher speed and lower torque, suitable for faster drilling of smaller holes. Always select the appropriate gear before starting the drill.

4. Torque Adjustment Collar (20-Stage Clutch)

The torque adjustment collar, located behind the chuck, allows you to set the desired torque for screw driving applications. It has 20 settings, plus a drill mode. Rotate the collar to align the desired number with the indicator mark. Lower numbers provide less torque, preventing over-tightening or stripping screw heads. The drill symbol bypasses the clutch for maximum torque, suitable for drilling.

5. Luce LED integrata

The integrated LED light illuminates the work area when the trigger is pulled, improving visibility in dimly lit conditions.

6. Drilling and Screw Driving

For drilling, select the drill mode on the torque collar and the appropriate speed gear. Apply steady, even pressure. For screw driving, select a torque setting appropriate for the screw size and material. Start slowly and increase speed as needed. The clutch will disengage when the set torque is reached, preventing over-driving.

The drill is capable of drilling up to 13mm in mild steel and 36mm in wood. For screw driving, it can handle wood screws up to 6 x 75mm.

Mantenimentu

1. Pulizia

Pulite regularmente l'aperture di ventilazione di l'utensile per impedisce u surriscaldamentu. Aduprate un pannu dolce èamp cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners. Keep the chuck jaws free of debris.

2. Cura di batterie

Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store fully discharged batteries for extended periods. Recharge batteries before they are completely depleted to prolong their lifespan.

3. Storage

When not in use, store the drill, batteries, and charger in the provided carry case in a secure, dry location out of reach of children.

Risoluzione di prublemi

• U trapanu ùn principia micca: Ensure the battery is fully charged and properly inserted. Check the forward/reverse switch is not in the center (locked) position.
• Perdita di putenza durante u funziunamentu: A batteria pò esse bassa. Ricaricate a batteria.
• U pezzu ùn hè micca tenutu bè: Ensure the chuck is tightened sufficiently. Check for debris in the chuck jaws.
• Over-tightening screws: Ajustate u collarinu di torsione à un paràmetru più bassu.
• Drill bit getting stuck: Reduce pressure, ensure the correct bit is used for the material, and clear any debris from the hole.

If problems persist, contact HIKOKI customer support.

Specificazioni

Infurmazioni di Garanzia

This HIKOKI product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase or visit the official HIKOKI website for detailed terms and conditions. Keep your purchase receipt as proof of purchase for any warranty claims.

Supportu

For technical assistance, spare parts, or service, please contact HIKOKI customer support. You can find contact information on the official HIKOKI website or through your local dealer. When contacting support, please have your product model number (DS18DAWCZ) and serial number (if applicable) ready.

Produttore: HIKOKI INDIA PVT LTD, Plot no. 9A, 1st Phase, Peenya Industrial Area, Bengaluru - 560058. India