EZoneTronics Android 11 Car Stereo User Manual for Honda Accord 7th Gen (2003-2007)

1. Introduzione

This manual provides detailed instructions for the installation, operation, and maintenance of your EZoneTronics Android 11 Car Stereo system, specifically designed for the Honda Accord 7th Generation (2003-2007). Please read this manual thoroughly before installation and use to ensure proper functionality and to maximize your experience with the device.

The system features a 10-inch touchscreen, Android 11 operating system, built-in Carplay and Android Auto, 4G internet capability, GPS navigation, Bluetooth, and Wi-Fi connectivity.

2. Informazioni di sicurezza

Always prioritize safety. Improper installation or operation can lead to vehicle damage or personal injury. Observe the following precautions:

• Do not attempt to operate the unit while driving. Distraction can lead to accidents.
• Ensure all wiring is correctly connected to prevent short circuits or electrical fires.
• Cunsultate un prufessiunale per l'installazione sè ùn site micca sicuru di qualchì passu.
• Mantene u vulume à un livellu chì vi permette di sente i soni di u trafficu esternu.

3. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli sò presenti in u pacchettu:

• 1 x EZoneTronics Android Player (Main Unit)
• 1 x Antenna GPS
• 1 x Imbracatura di putenza
• 1 x RCA Input/Output Cable
• 2 adattatori USB
• 1 x Cavu d'entrata di a camera
• 1 x Manuale d'usu (stu documentu)

4. Setup è Installazione

This section outlines the general steps for installing the EZoneTronics car stereo. Professional installation is recommended.

4.1 Cuntrolli Pre-Installazione

• Scollegate a batteria di u veiculu per impedisce i cortocircuiti elettrichi.
• Ensure the vehicle's dashboard is clean and free of debris.
• Identify the existing wiring harness and connections in your Honda Accord 7th Gen (2003-2007).

4.2 Connessioni Wiring

Connect the provided cables as follows:

1. Cablaggio di putenza: Connect the main power harness to the vehicle's corresponding power, ground, and accessory wires. Ensure correct polarity.
2. Antenna GPS: Muntate l'antenna GPS in un locu cù una vista chjara view of the sky, typically on the dashboard or under the windshield. Connect it to the GPS input on the main unit.
3. Adattatori USB: Connect the USB adapters to the rear USB ports of the unit. Route them to a convenient location for connecting USB devices.
4. Cavi RCA: If connecting external amplifiers or subwoofers, use the RCA input/output cables.
5. Input camera: S'ellu si stalla una parte posterioreview camera, connect its video output to the camera input cable on the unit.
6. Controlu di u volante: The unit supports original car steering wheel buttons. Connect the steering wheel control wires as per your vehicle's wiring diagram. Configuration may be required in the unit's settings.

Figure 1: EZoneTronics Android 11 Car Stereo Main Unit. This image displays the front view of the car stereo with its 10-inch touchscreen and physical control buttons below the screen.

Figure 2: GPS Navigation Interface. This image shows the car stereo screen displaying a navigation map with various map application icons at the top, indicating support for multiple navigation services.

Figure 3: Steering Wheel Control Functionality. This image illustrates the car stereo installed in a dashboard, highlighting that it supports the vehicle's original steering wheel buttons for controlling audio and other functions.

4.3 Muntà l'unità

Carefully insert the main unit into the dashboard opening. Secure it using the vehicle's mounting brackets or the provided mounting hardware. Ensure a snug fit without excessive force.

Note: Some vehicle models may require minor modifications to the dashboard trim for a perfect fit. Refer to vehicle-specific installation guides if necessary.

4.4 Power-Up iniziale

Reconnect the vehicle's battery. Turn on the ignition. The unit should power on and display the EZoneTronics logo or Android boot screen.

5. Operating Instructions

5.1 Navigazione di l'interfaccia basica

The unit operates on Android 11. Navigate the interface using the 10-inch touchscreen. Swipe left/right to access different home screens, tap icons to open applications, and use the back/home buttons on the screen or physical buttons (if available) for navigation.

Figure 4: CarPlay and Android Auto Support. This image shows the car stereo displaying the CarPlay interface, with two smartphones below illustrating the CarPlay and Android Auto logos, indicating compatibility with both systems.

5.2 Cunnessione Bluetooth (Bluetooth 5.0)

1. Andà à Settings > Bluetooth.
2. Attivate u Bluetooth nant'à u stereo di a vittura è nant'à u vostru dispusitivu mobile.
3. Cerca available devices on your mobile phone and select the car stereo (e.g., "EZoneTronics Car Stereo").
4. Cunfirmate u codice di accoppiamentu nantu à i dui dispusitivi.
5. Once paired, you can make hands-free calls, sync contacts, and stream audio.

Figure 5: Bluetooth Functionality. This image displays the car stereo screen showing a phone call interface and music playback controls, with icons for hands-free calls, contact sync, call records, and Bluetooth music streaming.

5.3 Wi-Fi and 4G Internet

The unit supports Wi-Fi and 4G SIM card connectivity for internet access.

• Wi-Fi: Andà à Settings > Rete è Internet > Wi-Fi. Select your desired network and enter the password.
• 4G SIM Card: Insert a compatible 4G SIM card into the designated slot (refer to installation diagram for slot location). The unit should automatically detect the network.

5.4 Navigazione GPS

The built-in GPS receiver supports various navigation applications (e.g., Waze, Google Maps). Ensure the GPS antenna is properly installed.

• Open your preferred navigation app from the home screen or app drawer.
• Enter your destination and follow the on-screen instructions.
• Offline maps can be downloaded via Wi-Fi for use without an internet connection.

5.5 CarPlay è Android Auto

Connect your smartphone via USB to enable CarPlay (for iPhones) or Android Auto (for Android phones). This allows seamless integration of phone features onto the car stereo screen.

• Connect your phone to the unit's USB port.
• Follow the prompts on both your phone and the car stereo to initiate CarPlay or Android Auto.

5.6 Funzionalità di schermu divisu

The Android 11 system supports split-screen multitasking. This allows two applications to run simultaneously on the screen.

• Aprite a prima applicazione.
• Press and hold the recent apps button (usually a square icon) or swipe up and hold from the bottom of the screen to enter split-screen mode.
• Select the second application from the recent apps list or app drawer.

Figure 6: Split Screen Function. This image shows the car stereo screen divided into two sections, displaying a navigation map on one side and a video game on the other, demonstrating the multitasking capability.

5.7 Audio Settings (DSP 32-Band EQ)

Access the built-in Digital Sound Processor (DSP) for advanced audio customization.

• Andà à Settings > Sonu > Equalizer or look for a dedicated "DSP" app.
• Adjust the 32-band equalizer, fader, balance, treble, and bass settings to your preference.
• Predefined EQ settings are also available.

Figure 7: Built-in DSP 32-Band Equalizer. This image displays the car stereo screen showing a detailed graphical equalizer interface with multiple frequency bands, along with controls for sound field, fader, and balance settings.

5.8 FM/AM/RDS Radio

Access the radio application to listen to FM and AM stations. The unit supports RDS (Radio Data System).

• Aprite u Radio app.
• Aduprate a funzione di scansione per truvà e stazioni dispunibili o sintonizà manualmente una frequenza.
• Salvate e vostre stazioni preferite cum'è preset.

Figure 8: FM & RDS Radio Interface. This image displays the car stereo screen displaying the radio tuner, tuned to 87.50 MHz, with preset buttons and controls for scanning and band selection.

6. Mantenimentu

• Pulizia di u screnu: Use a soft, lint-free cloth to clean the touchscreen. For stubborn smudges, lightly dampLavate u pannu cù acqua o un detergente sicuru per u schermu. Evitate i prudutti chimichi aggressivi.
• Actualizazioni di u software: Periodically check for software updates via the unit's settings menu (Settings > À propositu di u dispusitivu > L'aghjurnamenti di u sistema). Updates can improve performance and add new features.
• Cura Generale: Evitate d'espone l'unità à temperature estreme, à a luce diretta di u sole per periodi prolungati o à umidità eccessiva.

7. Risoluzione di prublemi

8. Specificazioni

• Mudellu: RMS8-HND-ACC07-2G32
• Sistema Operativu: Android 11
• Dimensione di u screnu: 10 inch
• Risoluzione di a visualizazione: 1280 x 720 pixel
• Processore: Octa Core Cortex A55, 1.6 GHz
• RAM: 2 GB DDR3
• Memoria interna (ROM): 32 GB
• Connettività: 4G SIM support, Built-in Wi-Fi, Bluetooth 5.0
• GPS: Built-in GPS Receiver (Compatible with Waze, Navfree, Google Maps, Yandex Map, etc.)
• Output audio: 4 x 45 W
• Funzioni audio: 32-Band DSP Equalizer, Volume/Fader/Balance/Treble/Bass Control, 4.1 Channel RCA/Sub Output
• Ingressi: 2 x Rear USB, 1 x Rear Camera Input, 1 x Video Input, 2 x Audio Input
• Cumpatibilità: Built-in Carplay, Android Auto
• Lingue supportate: English, French, Italian, German, Spanish, Portuguese, Chinese, Japanese, and more.

9. Garanzia è Support

EZoneTronics provides a 1 anni di garanzia for this product from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use.

For technical assistance, warranty claims, or any inquiries, please contact our customer service team:

• E-mail: sales2@rhythmhk.com

Please have your model number (RMS8-HND-ACC07-2G32) and purchase details ready when contacting support.