Capresso Infinity Plus Conical Burr Grinder

1. Introduzione

The Capresso Infinity Plus Conical Burr Grinder is designed to provide a precise and consistent grind for various brewing methods. Grinding fresh whole beans immediately before brewing is essential for achieving optimal coffee flavor and aroma. This manual provides detailed instructions for the safe and effective use, maintenance, and troubleshooting of your grinder.

The Infinity Plus model features commercial-grade, solid steel conical burrs and an innovative gear reduction motor to minimize friction and heat, preserving the coffee's delicate flavors. It offers 16 fineness settings, from extra fine for Turkish coffee to very coarse for percolators and cold brew.

2. Salvaguardi impurtanti

• Leghjite tutte l'istruzzioni prima di aduprà l'apparechju.
• To protect against electrical hazards, do not immerse the power cord, plug, or the appliance body in water or other liquids.
• A vigilazione stretta hè necessaria quandu qualsiasi apparecchiu hè utilizatu da o vicinu à i zitelli.
• Scollegate da a presa quandu ùn hè micca in usu, prima di assemblare o smontare e parti, è prima di pulisce.
• Evite u cuntattu cù e parti in muvimentu.
• Ùn operate micca l'apparechju cù un cordone o una spina dannatu, o dopu chì l'apparechju hà malfunzionatu o hè statu dannatu in ogni modu.
• Ùn aduprate micca fora.
• Ùn lasciate micca u cordone pendu nantu à u bordu di a tavola o di u bancu, o toccu superfici calde.
• Ùn aduprate micca l'apparechju per altri usi ch'è previstu.

3. Identificazione di parti

Familiarize yourself with the components of your Capresso Infinity Plus grinder:

1. Bean Hopper with Lid: Holds whole coffee beans.
2. Upper Conical Burr: Removable for cleaning.
3. Grind Selector Dial: Adjusts grind fineness (16 settings).
4. Timer Dial: Sets grinding duration.
5. Ground Coffee Container: Collects ground coffee.
6. Lower Conical Burr: Fixed component.
7. Main Unit Base: Houses the motor and controls.
8. Power Cord: Connects to electrical outlet.

Figura 1: Overview of the Capresso Infinity Plus Conical Burr Grinder in White.

Figura 2: Primu pianu view of the grind selector dial, showing various fineness settings.

Figure 3: Illustration of removing the upper conical burr for cleaning.

4. Setup

1. Imballà: Eliminate cù cura tutti i cumpunenti da l'imballu.
2. Pulita: Wash the bean hopper, bean hopper lid, and ground coffee container with mild soap and water. Ensure all parts are completely dry before assembly.
3. Assembla : Place the ground coffee container into its designated slot in the main unit. Ensure the upper conical burr is securely in place. Attach the bean hopper to the top of the unit and secure its lid.
4. Placement: Position the grinder on a clean, dry, and stable surface.
5. putenza: Inserite u cavu di alimentazione in una presa elettrica adatta (120 Volt).

5. Operating Instructions

1. Riempite a tramoggia di fagioli: Open the bean hopper lid and pour whole coffee beans into the hopper. The hopper has an 11-ounce capacity. Replace the lid securely.
2. Select Grind Fineness: Rotate the grind selector dial to choose your desired fineness setting. Refer to the 'Grind Settings Guide' below for recommendations based on your brewing method.
3. Imposta u tempu di macinazione: Rotate the timer dial to select the desired grinding duration. The grinder will automatically stop once the set time has elapsed.
4. Accumincia a macinazione: Press the power button to begin grinding. The grinder will operate until the timer runs out or until you press the power button again to stop it manually.
5. Raccoglie u caffè macinatu: Once grinding is complete, carefully remove the ground coffee container from the unit.
6. Macinazione à impulsi: For additional control, you can use the pulse grinding feature by repeatedly pressing and releasinu buttone di accensione.

6. Grind Settings Guide

The Capresso Infinity Plus offers 16 grind settings. Use the table below as a general guide for various brewing methods:

Figure 4: Recommended grind settings for various coffee brewing methods.

7. Mantenimentu è Pulizia

Una pulizia regulare assicura prestazioni ottimali è allunga a vita di u vostru macinatore.

1. Scollega: Scollegate sempre u macinacaffè da a presa di corrente prima di pulisce.
2. Eliminate Bean Hopper: Remove the bean hopper and empty any remaining whole beans.
3. Eliminate a bava superiore: Twist and lift the upper conical burr out of the unit (refer to Figure 3).
4. Bave pulite: Use a brush (not included) to clean both the upper and lower conical burrs. Remove any trapped coffee particles.
5. Contenitore di caffè macinatu pulitu: Empty and wash the ground coffee container and its lid with warm, soapy water. Rinse thoroughly and dry completely.
6. Pulite l'esterno: Asciugate l'esternu di u macinatore cù un pannu dolce èamp pannu. Ùn aduprate micca detergenti abrasivi è ùn immergete micca l'unità principale in acqua.
7. Riunisce: Once all parts are dry, reassemble the grinder by placing the upper burr back into position, followed by the bean hopper and its lid. Insert the clean ground coffee container.

The innovative gear reduction motor and anti-static design help minimize static cling of coffee grounds, making cleanup easier.

8. Risoluzione di prublemi

• Grinder does not start:
  • Assicuratevi chì u cordone di alimentazione hè ben inseritu in una presa di travagliu.
  • Check that the bean hopper and ground coffee container are correctly assembled and locked into place.
  • Verify the timer dial is set to a desired grinding duration.
• Macinazione inconsistente:
  • Ensure the burrs are clean and free of obstructions.
  • Adjust the grind selector dial to a different setting and test.
• Grinder is clogged:
  • Unplug the unit. Remove the bean hopper and upper burr. Carefully clear any blockages from the burrs and the grinding chamber using a brush.
• Excessive static cling of grounds:
  • The Infinity Plus features anti-static technology. If static persists, ensure the ground coffee container is completely dry before use.

9. Specificazioni

• Marca: Capresso
• Mudellu: 570.02
• Culore: Biancu
• Dimensioni: 5 x 7.75 x 11.25 inch
• Pesu di l'articulu: 4 liri
• Voltage: 120 Volts
• Capacità di u Cuntenitore di Fagioli: 11 once
• Ground Coffee Container Capacity: Up to 4 ounces
• Impostazioni di macinazione: 16 (Extra Fine à Grossu)
• Tipu di Burr: Commercial-grade solid steel conical burrs
• Funzioni speciali: Innovative gear reduction motor, safety lock, auto-off, removable upper burr, pulse grinding.

10. Garanzia è Support

Per infurmazioni nantu à a garanzia, a registrazione di u produttu o l'assistenza tecnica, vi pregu di cunsultà u situ ufficiale di Capresso. websitu o cuntattate u so serviziu clienti. Cunservate a vostra ricevuta d'acquistu cum'è prova d'acquistu per qualsiasi reclamu di garanzia.