1. Introduzione
Thank you for choosing the Perlegear PGTVS24 Universal Tabletop TV Stand. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your new TV stand. Please read these instructions thoroughly before installation and keep them for future reference.
The Perlegear PGTVS24 is designed to provide a stable and adjustable base for most 22 to 60-inch flat or curved televisions, offering a reliable alternative to original TV feet. Its robust construction and height adjustment features ensure an optimal viewsperienza.
2. Impurtante Information Safety
WARNING: Failure to read and follow these instructions can result in serious personal injury, property damage, or voiding your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Capacità di pesu: Do not exceed the maximum weight capacity of 88 lbs (40 kg). This stand is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury.
- Dimensione di u screnu: This stand is designed for televisions between 22 and 60 inches. Ensure your TV falls within this range.
- Compatibilità VESA: Verify your TV's VESA mounting pattern is between 100x100mm and 400x400mm.
- Assemblea propria: Assemble the product strictly according to the instructions. Incorrect assembly can lead to product failure or injury.
- Stabilità di a superficia: Ensure the surface on which the stand is placed is stable, level, and capable of supporting the combined weight of the stand and the television.
- I zitelli: Tenite i zitelli luntanu da a zona di muntatura. I pezzi chjuchi ponu esse un periculu di suffocazione.
- Strumenti: Aduprate l'arnesi adatti cum'è specificatu in l'istruzzioni di muntatura.
- Cuntrolli regulari: Verificate periodicamente chì tutte e viti è e cunnessione sianu sicure.
3. Cuntenutu di u pacchettu
Before assembly, please verify that all components are present and undamaged. If any parts are missing or defective, do not attempt to assemble. Contact Perlegear customer service for assistance.
While specific part labels are not provided, the package typically includes:
- Base Plate (Reinforced Glass)
- Pilastru di Supportu
- TV Bracket (Horizontal Bar)
- TV Mounting Arms (Vertical Bars)
- Various Screws, Washers, and Spacers for TV mounting
- Assembly Hardware for the stand structure
- Non-slip Pads for the base
- Clips di Gestione di Cavi
- Manuale d'istruzzioni
4. Specifications Product
| Specificazione | Detail |
|---|---|
| Numero di mudellu | PGVS24 |
| Dimensioni TV compatible | 22 - 60 pollici (piani o curvi) |
| Capacità massima di carica | 88 lbs (40 kg) |
| Compatibilità VESA | 100x100mm, 100x200mm, 200x100mm, 200x200mm, 200x300mm, 300x200mm, 300x300mm, 300x400mm, 400x200mm, 400x300mm, 400x400mm |
| Ajustamentu di l'altezza | 6 levels (3 on pillar, 2 on bracket hooks) |
| Gamma d'altezza | 11.4 inches to 15.3 inches (from base to center of TV) |
| Materiale di basa | Reinforced Glass |
| Dimensioni basi | 15.8 pollici (Lunghezza) x 10.2 pollici (Larghezza) |
| Materiale di custruzzione | Steel (Pillar and Brackets) |
| Culore | Neru |
| Dimensioni di u produttu (in generale) | 44.2 x 28.96 x 5.08 cm (circa 17.4 x 11.4 x 2 pollici) |
| Pesu di u produttu | 3.58 kg (circa 7.9 lbs) |
| Gestione di cavi | Clip integrati |
5. Setup è Assemblea
Follow these steps carefully to assemble your Perlegear PGTVS24 TV stand.
Passu 5.1: Preparate a Base
Attach the support pillar to the reinforced glass base. Ensure the non-slip pads are applied to the bottom of the glass base to prevent movement and protect surfaces.
Step 5.2: Assemble the TV Bracket
Attach the horizontal TV bracket to the top of the support pillar. This bracket features the Perlegear logo and provides the main mounting point for your television.
Step 5.3: Attach TV Mounting Arms to Your Television
Carefully place your TV face down on a soft, clean surface. Identify the VESA mounting holes on the back of your TV. Select the appropriate screws, washers, and spacers from the provided hardware kit that fit your TV's specific mounting holes. Attach the two vertical TV mounting arms to the back of your television, ensuring they are securely fastened and oriented correctly (usually with the hooks facing upwards).
Passu 5.4: Muntate u televisore nantu à u supportu
With assistance, carefully lift your television and hook the attached mounting arms onto the horizontal TV bracket. Ensure both arms are securely seated on the bracket. Use the security lock mechanism (if applicable) to prevent accidental dislodgement.
Passu 5.5: Management Cable
Utilize the integrated cable clips on the support pillar to route and organize your TV cables, maintaining a clean and tidy appearance.
6. Operating Instructions
Ajustamentu di l'altezza
The Perlegear PGTVS24 TV stand offers 6 levels of height adjustment to optimize your viewing angle. This is achieved through two mechanisms:
- Support Pillar Adjustment: The main support pillar has 3 pre-drilled height settings. To adjust, you will need to partially disassemble the stand to reposition the horizontal TV bracket at a different height on the pillar.
- TV Mounting Arm Adjustment: The vertical TV mounting arms have multiple hook positions. You can adjust the height of your TV by selecting a different set of hooks on the mounting arms when attaching them to the horizontal bracket. This allows for finer adjustments without disassembling the main stand structure.
To adjust the height, ensure the TV is safely supported or removed from the stand. Loosen the necessary screws, reposition the components to your desired height, and securely tighten all fasteners before re-mounting the TV.
TV Compatibility Overview
This stand is designed for a wide range of televisions. Refer to the image below for a visual representation of compatible TV sizes and VESA patterns.
7. Mantenimentu
- Pulizia: Aduprà un soft, damp cloth to clean the stand. Avoid harsh chemicals or abrasive cleaners that could damage the finish or glass.
- Ispezioni: Verificate periodicamente tutte e viti è e cunnessione per assicurà chì fermanu strette è sicure. E cunnessione lasse ponu purtà à instabilità.
- Cura di u vetru: Handle the glass base with care to prevent chips or cracks. Clean glass surfaces with a glass cleaner and a soft cloth.
8. Risoluzione di prublemi
- TV is not stable:
- Ensure all screws are tightened securely, especially those connecting the TV mounting arms to the TV and the arms to the horizontal bracket.
- Verify that the TV's weight and VESA pattern are within the stand's specifications.
- Check that the stand is placed on a flat, level, and stable surface.
- Difficulty attaching TV to the stand:
- Confirm you are using the correct screws, washers, and spacers for your TV's VESA holes.
- Ensure the TV mounting arms are oriented correctly on the back of your TV.
- Seek assistance from another person when lifting and mounting the TV.
- Stand appears wobbly:
- Re-check all assembly connections, particularly where the support pillar connects to the base and the horizontal bracket.
- Ensure the non-slip pads are properly installed on the base.
9. Garanzia è Assistenza Clienti
Perlegear stands behind the quality of its products. For specific warranty details, please refer to the warranty card included with your purchase or visit the official Perlegear websitu.
If you encounter any issues during assembly or use, or if you have questions about your Perlegear PGTVS24 TV stand, please do not hesitate to contact our customer support team. Our representatives are available to assist you with technical support, missing parts, or any other concerns.
Informazioni di cuntattu: Please refer to the contact details provided on the Perlegear packaging or official website for the most up-to-date customer support information.
