1. Introduzione
The EPOMAKER TH80 Pro is a high-performance 75% layout mechanical gaming keyboard designed for versatility and customization. It features a compact design, hot-swappable switches, tri-mode connectivity (Bluetooth 5.0, 2.4GHz wireless, and USB-C wired), PBT keycaps, and vibrant RGB backlighting. This manual provides instructions for setting up, operating, maintaining, and troubleshooting your TH80 Pro keyboard.
Image: The EPOMAKER TH80 Pro keyboard showcasing its 75% layout and key features like hot-swappable design, tri-mode connectivity, and RGB backlighting.
2. Cuntenutu di u pacchettu
Prima di principià, assicuratevi chì tutti l'articuli sò presenti in u vostru pacchettu:
- EPOMAKER TH80 Pro Mechanical Keyboard
- Cavo USB-C à USB-A
- Estrattore Keycap
- Interruttore Puller
- Extra Switches (quantity may vary)
- 2.4GHz USB Receiver (stored in the keyboard)
- Manuale d'uso (stu documentu)
Image: Contents of the EPOMAKER TH80 Pro package, including the keyboard, USB cable, keycap puller, and user manual.
3. Setup è Connectivity
3.1 Accensione è carica
Locate the power switch on the underside of the keyboard. Slide it to the 'ON' position to power on the device. To charge the keyboard, connect the provided USB-C cable to the keyboard's USB-C port and the other end to a USB power source. The keyboard features a 4000mAh battery for extended use.
Image: Underside of the EPOMAKER TH80 Pro keyboard, showing the power switch and the storage slot for the 2.4GHz USB receiver.
3.2 Modi di cunnessione
The TH80 Pro supports three connectivity modes:
- Modu USB-C cablatu: Connect the keyboard directly to your device using the USB-C cable. This mode also charges the keyboard.
- Modu wireless 2.4GHz: Insert the 2.4GHz USB receiver into an available USB port on your computer. The keyboard will automatically connect. The polling rate can reach up to 1000Hz in this mode.
- Modu Bluetooth 5.0: A tastiera pò cunnette si à un massimu di trè dispusitivi Bluetooth.
Image: Diagram illustrating the tri-mode connectivity options of the EPOMAKER TH80 Pro, including USB-C wired, Bluetooth, and 2.4GHz wireless, connecting to various devices like PC, laptop, tablet, and smartphone.
Istruzioni di accoppiamentu Bluetooth:
- Assicuratevi chì u teclatu hè alimentatu.
- Press fn+1, fn+2, o fn+3 to select a Bluetooth channel. The corresponding key will flash rapidly, indicating pairing mode.
- On your device, search for Bluetooth devices and select "TH80 Pro" to connect.
- Once connected, the key will stop flashing and remain steadily lit.
4. Utilizà a tastiera
4.1 Funzioni di i tasti basi
The TH80 Pro features a 75% layout, providing essential keys while maintaining a compact form factor. Standard alphanumeric keys, function row (F1-F12), navigation keys (Page Up, Page Down, Home, End via Fn combinations), and arrow keys are present.
4.2 Cuntrollu di a retroilluminazione RGB
The keyboard features customizable RGB backlighting. Use the following shortcuts to control the lighting effects:
- Fn + Backspace: Turn on/off backlighting.
- Fn + |\: Toggle through different RGB lighting effects.
- Fn + P: Toggle through different RGB lighting colors.
Image: The EPOMAKER TH80 Pro keyboard displaying its vibrant RGB backlighting, with an overlay showing key combinations for controlling backlight functions.
4.3 Knob Control
The rotary knob located on the top right of the keyboard serves multiple functions:
- Rotà: Ajusta u vulume di u sistema.
- Press: Disattiva / riattiva l'audio.
4.4 Software Programmabile
The TH80 Pro is compatible with dedicated software for advanced customization. This software allows you to:
- Mudificà e macro.
- Persunalizà l'effetti di illuminazione RGB.
- Rimappate i tasti.
- Redefine knob functions.
The software is compatible with Windows and Mac OS. Please visit the official EPOMAKER websitu per scaricà l'ultima versione.
Image: Screenshot of the EPOMAKER TH80 Pro's programmable software interface, showing options for macro editing, RGB effects, key remapping, and knob redefinition.
4.5 Interruttori scambiabili à caldu
The TH80 Pro features a hot-swappable PCB, allowing you to change mechanical switches without soldering. It supports most 3-pin or 5-pin mechanical switches. Use the included switch puller to carefully remove switches and insert new ones.
Imagine: Primu pianu view of the EPOMAKER TH80 Pro keyboard demonstrating the hot-swappable switch feature, showing a switch being removed with a switch puller and the underlying hot-swap socket.
5. Mantenimentu
5.1 Pulizia di a tastiera
Per mantene prestazioni è aspettu ottimali, pulite regularmente a vostra tastiera:
- Scollegate a tastiera da tutte e fonti di alimentazione.
- Aduprate un panno morbido senza pelucchi dampened with a small amount of water or a mild cleaning solution to wipe the keycaps and chassis.
- For deeper cleaning, use the included keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
- Assicuratevi chì a tastiera sia cumpletamente asciutta prima di ricunnettela.
5.2 Sustituzione di i tasti è di l'interruttore
The PBT keycaps are durable and oil-resistant. If you wish to replace them or the switches:
- Use the keycap puller to gently remove keycaps by hooking it onto the sides of the keycap and pulling upwards.
- Use the switch puller to remove switches by compressing the clips on the top and bottom of the switch and pulling upwards.
- Align new switches carefully with the PCB sockets and press down firmly until they click into place.
- Place new keycaps onto the switch stems and press down until secure.
6. Risoluzione di prublemi
If you encounter issues with your EPOMAKER TH80 Pro, refer to the following common solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A tastiera ùn risponde micca (cablata) | Loose cable connection, faulty USB port, keyboard off. | Ensure USB-C cable is securely connected. Try a different USB port or cable. Check if the power switch is ON. |
| Keyboard not responding (2.4GHz Wireless) | Receiver not connected, low battery, keyboard off, interference. | Ensure 2.4GHz receiver is plugged in. Charge the keyboard. Check if the power switch is ON. Move closer to the receiver or reduce interference. |
| A tastiera ùn risponde micca (Bluetooth) | Not paired, low battery, out of range, incorrect channel selected. | Re-pair the keyboard (Fn+1/2/3). Charge the keyboard. Ensure device Bluetooth is on. Select the correct Bluetooth channel. |
| RGB backlighting not working | Retroilluminazione spenta, prublema di software. | Press Fn + Backspace to toggle backlight. Check software settings. |
| Chjavi digitate duie volte o micca registrate | Interruttore difettuosu, detriti sottu à u cappucciu di a chjave. | Remove keycap and clean. Replace the faulty switch using the switch puller. |
7. Specificazioni
Key technical specifications for the EPOMAKER TH80 Pro keyboard:
| Feature | Detail |
|---|---|
| Mudellu | TH80 Pro |
| Disposizione | 75% Compattu |
| Connettività | Bluetooth 5.0, Senza Filu 2.4 GHz, USB-C Cablatu |
| Capacità batterie | 4000 mAh |
| Tasti di tasti | PBT, MDA Profile, Dye-sub Technique |
| Cambia | Sostituibile à caldu (compatibile cù 3/5 pin) |
| Retroilluminazione | RGB |
| OS compatible | Windows, Mac OS, PS5, PS4, Xbox, Android, iOS |
| Dimensioni di u produttu | 12.91"L x 5.59"L x 1.57"A (32.8 cm x 14.2 cm x 4 cm) |
| Pesu di l'articulu | 2.99 liri (1.36 kg) |
8. Garanzia è Support
EPOMAKER products are covered by a limited warranty against manufacturing defects. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official EPOMAKER website. If you require technical assistance or have questions not covered in this manual, please contact EPOMAKER customer support through their official websitu o u rivenditore induve avete acquistatu u pruduttu.