Manuale d'usu di l'aspiratrice AURA Livac 114R

1. Introduzione

This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your AURA Livac 114R Suction Machine. Please read this manual thoroughly before using the appliance and retain it for future reference.

The AURA Livac 114R is a versatile cleaning appliance designed for dust and water suction, carpet washing, and blower functions, offering powerful cleaning capabilities for various household and commercial needs.

2. Istruzzioni di sicurità

ATTENZIONE: Per riduce u risicu d'incendiu, scossa elettrica o ferite, leghjite è seguitate attentamente tutte l'istruzzioni.

• Always disconnect the power cord from the electrical outlet before servicing.
• Do not use the appliance on wet surfaces when operating in dry mode.
• Ùn pigliate micca liquidi infiammabili o combustibili, cum'è a benzina, o l'utilizate in spazii induve ponu esse prisenti.
• Ùn pigliate micca qualcosa chì brusgia o fuma, cum'è cigarettes, fiammiferi o cendri caldi.
• Mantene i capelli, a ropa larga, i dita è tutte e parte di u corpu luntanu da l'apertura è e parti in muvimentu.
• Aduprate solu cum'è descrittu in questu manuale. Aduprate solu l'accessori cunsigliati da u fabricatore.
• Ùn aduprate micca cù un cavu o una spina dannighjata. Sè l'apparecchiu ùn funziona micca cum'è duveria, hè statu cascatu, dannighjatu, lasciatu fora o cascatu in acqua, restituitelu à un centru di assistenza.
• Ùn tirate o portate cù u cordone, aduprate u cordone cum'è manicu, chjude una porta nantu à u cordone, o tirate u cordone intornu à bordi o anguli affilati. Ùn fate micca passà l'apparechju nantu à u cordone. Mantene u cordone luntanu da e superfici riscaldate.
• Ùn scollegate micca tirà u cordone. Per disinserisce, pigliate u plug, micca u cordone.
• Ùn manighjà micca u plug o l'apparechju cù e mani bagnate.
• Spegne tutti i cuntrolli prima di scollega.

3. Cumpunenti di u produttu

The AURA Livac 114R Suction Machine includes the following main components:

• Main Unit (Motor housing, dust/water container)
• Tubu flexible
• Bacchette di Prolungazione
• Carpet Washing Nozzle
• Filtru di polvere
• Water Tank (for carpet washing solution)
• Cordone d'alimentazione

Figura 1: Overview of the AURA Livac 114R Suction Machine, showing the main unit, flexible hose, and carpet washing nozzle attachment.

4. Setup è Assemblea

4.1 Unpacking

Carefully remove all components from the packaging. Check for any damage during transit. Ensure all parts listed in Section 3 are present.

4.2 Attaching the Flexible Hose

1. Locate the suction inlet on the main unit.
2. Insert the flexible hose connector firmly into the inlet until it clicks into place.

4.3 Attaching Extension Wands and Nozzles

1. Connect the desired number of extension wands to the end of the flexible hose.
2. Attach the appropriate nozzle (e.g., carpet washing nozzle, crevice tool, brush) to the end of the extension wand.

4.4 Preparing for Carpet Washing

1. Open the extra basin (3.5 L capacity) for the cleaning solution.
2. Riempite u basin with water and a suitable carpet cleaning solution according to the solution manufacturer's instructions. Do not overfill.
3. Ensure the pump connection is secure.

5. Operating Instructions

5.1 Dry Vacuuming (Dust Suction)

1. Ensure the dust filter is correctly installed in the 5 L dust container.
2. Connect the flexible hose and appropriate dry vacuuming nozzle.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the power button (usually green or marked with 'I') to start the motor.
5. Move a bocca nantu à a superficia per esse pulita.
6. After use, press the power button to turn off the machine and unplug it.

5.2 Wet Vacuuming (Water Suction)

CAUTION: Remove the dust filter before wet vacuuming to prevent damage.

1. Eliminà u filtru di polvere.
2. Ensure the 6 L waste basin is empty and properly secured.
3. Connect the flexible hose and a suitable wet vacuuming nozzle.
4. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
5. Press u buttone di putenza per inizià u mutore.
6. Vacuum up spilled liquids. Do not exceed the maximum fill line of the waste basin.
7. After use, press the power button to turn off the machine and unplug it. Empty and clean the waste basin subitu.

5.3 Carpet Washing Function

1. Prepare the cleaning solution in the 3.5 L extra basin as described in Section 4.4.
2. Attach the carpet washing nozzle and ensure the spray hose is connected.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press the main power button (for suction) and the pump power button (for spraying solution).
5. Spray the cleaning solution onto the carpet by pressing the trigger on the nozzle.
6. Immediately move the nozzle over the wet area to suction up the dirty solution.
7. Work in small sections, overlapping slightly.
8. After cleaning, run the machine with clean water to rinse the internal hoses and nozzle.
9. Turn off both power buttons and unplug the machine. Empty and clean all basins.

5.4 Funzione di u ventilatore

1. Locate the blower outlet on the main unit (usually opposite the suction inlet).
2. Attach the flexible hose to the blower outlet.
3. Plug the power cord into a 220-240V AC, 50/60Hz electrical outlet.
4. Press u buttone di putenza per attivà u soffiatore.
5. Direct the airflow as needed for blowing dust or drying surfaces.
6. After use, press the power button to turn off the machine and unplug it.

6. Mantenimentu

Regular maintenance ensures optimal performance and extends the lifespan of your AURA Livac 114R.

6.1 Emptying and Cleaning the Dust/Waste Basin

• After each use, especially wet vacuuming or carpet washing, empty the 6 L waste basin.
• Risciacquate u basin thoroughly with clean water and allow it to air dry completely before reassembling.

6.2 Pulizia di u filtru di polvere

• For dry vacuuming, regularly check and clean the dust filter.
• Tap the filter gently to dislodge dust, or rinse with water if heavily soiled. Ensure it is completely dry before reinstallation.
• Rimpiazzà u filtru s'ellu hè dannighjatu o eccessivamente usuratu.

6.3 Cleaning the Extra Basin (Solution Tank)

• After carpet washing, empty any remaining cleaning solution.
• Rinse the 3.5 L extra basin with clean water to prevent residue buildup.

6.4 Cleaning Hoses and Nozzles

• Rinse all hoses and nozzles with clean water after wet use to prevent blockages and odors.
• Ensure they are dry before storage.

6.5 Storage

Conservate l'apparecchiu è i so accessori in un locu pulitu è ​​asciuttu, luntanu da a luce diretta di u sole è da temperature estreme.

7. Risoluzione di prublemi

8. Specificazioni

• Mudellu: Livac 114R
• Marca: AURA
• Max. putenza di u mutore: 2000 W
• Putenza di aspirazione: 1950 mm H2O
• Voltage: 220 - 240 V CA.
• Frequenza: 50/60 Hz
• Flussu d'aria: 200 m³/h
• Capacità di aspirazione: 1.5 l/s
• Potenza di a Pompa: 26 W
• Pressione di a pompa: 2.5 bar
• Waste Basin Volume: 6 l
• Capacità di u containeru di polvera: 5 l
• Extra Basin Volume (Solution Tank): 3.5 l
• Pesu di l'articulu: 8 kg (Package Dimensions: 54 x 50.7 x 44.7 cm; 8 kg)
• Funzioni speciali: Dry, Wet, Carpet Washing, Blower Function

9. Garanzia è Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official AURA websitu. Conservate a vostra ricevuta di compra cum'è prova di compra.

For technical assistance or spare parts, contact AURA customer service through the details provided in your product documentation.