Pro-Ject Debut III Phono SB Turntable User Manual

Introduzione

Welcome to the user manual for your new Pro-Ject Debut III Phono SB Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read these instructions carefully before first use.

Figure 1: Pro-Ject Debut III Phono SB Turntable (Walnut)

The Pro-Ject Debut III Phono SB is an audiophile-grade turntable featuring an 8.6" aluminum tonearm, electronic speed selection, and a pre-mounted Ortofon OM5e phono cartridge. It includes a built-in phono preamp per una cunnessione versatile.

Cuntenutu di u pacchettu

Before beginning setup, please ensure all components listed below are present in your package:

• Pro-Ject Debut III Phono SB Turntable
• Dustcover
• Feltru Mat
• Alimentazione elettrica
• RCA Cable (semi-balanced shielded audio cable, 1.23m)
• Standard Flat Belt (for 33/45 RPM)
• Protractor di Alignment di Cartuccia
• Round Belt (for 78 RPM)
• Pesu Anti-Skating
• Adapter for 7" Singles
• Ortofon OM5e Phono Cartridge (pre-mounted)

Istruzzioni di stallazione

Follow these steps carefully to set up your turntable.

1. Piazzamentu

Place the turntable on a stable, level surface away from direct sunlight, heat sources, and strong vibrations. Ensure adequate ventilation around the unit.

2. Installazione di u piattu è di a cintura

1. Carefully place the heavy steel platter onto the turntable spindle.
2. Locate the drive motor pulley. Gently stretch the standard flat belt (for 33/45 RPM) around the motor pulley and the inner rim of the platter. For 78 RPM playback, use the round belt.

Figure 2: Turntable Platter

Ensure the drive belt is correctly seated around the motor pulley and the platter's inner rim for stable rotation.

3. Cunfigurazione di u bracciu è di a cartuccia

Your Ortofon OM5e cartridge is pre-mounted and pre-adjusted. However, you will need to set the tracking force and anti-skating.

1. Imposta a forza di tracciamentu: Rotate the counterweight at the rear of the tonearm until the tonearm floats freely and is balanced horizontally. Lock the tonearm in its rest. Rotate the tracking force dial (the numbered ring on the counterweight) to '0'. Then, rotate the entire counterweight (including the dial) counter-clockwise until the desired tracking force is set. For the Ortofon OM5e, the recommended tracking force is typically 1.75g.
2. Imposta l'anti-pattinaggio: Attach the anti-skating weight to the small thread loop on the tonearm support. The thread should pass through the second groove for the Ortofon OM5e cartridge.

Figure 3: Tonearm with Anti-Skating Weight

Proper adjustment of tracking force and anti-skating is crucial for optimal sound quality and record preservation.

4. Cunnessione à un Amppiù vivu

The Debut III Phono SB features a built-in phono preamp, offering two output options:

• Line Out: Use this if your amplifier fa micca have a dedicated phono input. Connect the supplied RCA cable from the turntable's "Line Out" jacks to any standard line-level input on your amplifier (per esempiu, AUX, CD, Tuner).
• Phono Out: Use this if your amppiù vivu faci have a dedicated phono input. Connect the supplied RCA cable from the turntable's "Phono Out" jacks to your amplifier's "Phono" input.

Always connect the ground wire from the turntable to the ground terminal on your amplificatore per minimizà u ronziu.

Figure 4: RCA Outputs and Ground Terminal

Choose the appropriate output based on your ampe capacità di l'imperatore.

5. Connection Power

Connect the power supply to the DC input jack on the turntable and then plug it into a suitable wall outlet.

Istruzzioni di funziunamentu

1. Powering On / Off

The power switch is located on the underside of the turntable plinth. Flip the switch to the 'ON' position to power on the unit.

Figure 5: Power Switch Location

The discreetly placed power switch maintains the clean aesthetic of the turntable.

2. Selezzione Speed

The Debut III Phono SB features electronic speed selection for 33, 45, and 78 RPM.

• To switch between 33 and 45 RPM, press the speed control button located on the underside of the plinth. The platter will adjust to the selected speed.
• For 78 RPM playback, you must manually change the drive belt to the larger diameter step on the motor pulley and use the round belt provided. Then, select 45 RPM using the electronic speed control.

3. Ghjucà un Record

1. Place a record on the platter. If playing a 7" single, use the provided adapter.
2. Select the correct playback speed (33, 45, or 78 RPM).
3. Alzate delicatamente u bracciu aduprendu a leva di cueing.
4. Pusiziunate u bracciu sopra à u solcu iniziale desideratu di u discu.
5. Slowly lower the cueing lever to gently drop the stylus onto the record.
6. At the end of the record, lift the tonearm using the cueing lever and return it to the tonearm rest. Secure it with the tonearm clip.

Figure 6: Cartridge on Record

Handle the tonearm and cartridge with care to prevent damage to the stylus or records.

Mantenimentu

Regular maintenance will help preserve the performance and appearance of your turntable.

• Cleaning the Plinth and Dustcover: Use a soft, lint-free cloth to wipe down the plinth and dustcover. For stubborn marks, a slightly damp Un pannu pò esse adupratu, seguitatu da unu asciuttu. Evitate detergenti abrasivi o solventi.
• Pulizia di u Stilu: Use a dedicated stylus cleaning brush or fluid. Always brush from back to front (away from the cantilever). Clean the stylus regularly to prevent debris buildup, which can degrade sound quality and damage records.
• Sustituzione di a cintura: The drive belt may stretch over time. If you notice inconsistent speed or reduced torque, consider replacing the belt.
• Cura di e cartucce: Avoid touching the stylus with your fingers. If the cartridge needs replacement, consult a qualified technician or refer to the cartridge manufacturer's instructions.

Figure 7: Turntable with Dustcover

Keep the dustcover closed when not in use to protect the turntable from dust and debris.

Risoluzione di prublemi

Sè avete prublemi cù u vostru giradischi, riferitevi à i seguenti prublemi è suluzioni cumuni.

Specificazioni

Key technical specifications for the Pro-Ject Debut III Phono SB Turntable:

• Mudellu: Debut III Phono HG OM5e
• Drive Principle: Prughjettu di cinturione
• Velocità: 33, 45, 78 RPM (electronic speed selection for 33/45)
• Plateau : 1.7kg heavy steel platter
• bracciu: 8.6" Aluminum Tonearm
• Cartuccia: Ortofon OM5e (pre-mounted)
• Phono Preamp: Built-in (switchable Phono/Line Out)
• Tipu di Motore: Motor DC
• Dimensioni di u produttu (L x W x H): 16.34 x 12.6 x 4.65 inch (41.5 x 32 x 11.8 cm)
• Pesu di l'articulu: 12.1 liri (5.5 kg)
• Materiale: Engineered Wood (Plinth)
• Culore: Noce

Garanzia è Supportu

For warranty information and technical support, please refer to the official Pro-Ject Audio Systems websitu o cuntattate u vostru rivenditore autorizatu. Conservate a vostra prova d'acquistu per e richieste di garanzia.

Produttore: Sistemi Audio Pro-Ject