DIGITUS DN-45004

Digitus DN-45004 Mobile Desktop Charging Cabinet User Manual

Model: DN-45004 | 10 USB-C Ports with UV Lamp

1. Introduzione

The DIGITUS DN-45004 Mobile Desktop Charging Cabinet is designed for storing and charging portable devices such as tablets and smartphones. It features 10 USB-C charging ports and an integrated UV-C lamp for enhanced hygiene. This cabinet is suitable for public institutions like schools, providing a centralized and secure location for device management and charging.

2. Avissi di sicurità

3. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli sò presenti in u pacchettu:

4. Setup

  1. Unpacking: Carefully remove the charging cabinet from its packaging.
  2. Placement: Place the cabinet on a flat, stable, and dry surface. Ensure adequate ventilation around the unit. The anti-slip feet provide stability.
  3. Cunnessione di putenza: Connect the provided power cable to the C19 input on the rear of the cabinet and then to a suitable electrical outlet (110/220 VAC, 50/60 Hz).
  4. Initial Power Check: If the unit does not power on, check the internal circuit breaker located behind the rear panel. This breaker may trip during transport. To access, unscrew the four screws on the rear panel, remove it, and reset the blue lever on the circuit breaker to the 'On' position.
Internu view of the Digitus DN-45004 charging cabinet showing the circuit breaker and internal wiring.
Figura 4.1: Internu view showing the circuit breaker. If the unit does not power on, check this component.

5. Operating Instructions

5.1 Dispositivi di carica

  1. Aprite a porta: Use the provided keys to unlock and open the front door of the cabinet.
  2. Inserisce i dispositi: Place your tablets or smartphones into the designated slots. Note that this cabinet is primarily designed for tablets and smartphones; larger laptops may not fit.
  3. Connect to USB-C Ports: Connect your devices to the USB-C charging ports located at the front of each slot.
  4. Monitore u Statu di Carica: Integrated LED indicators above each port show the charging status:
    • Rossu: L'apparechju hè in carica.
    • Verde: Charging process is complete, or no device is connected.
  5. Chjude è chjude: Once devices are connected, close and lock the front door for security.
Fronte view of the Digitus DN-45004 charging cabinet with labels for LED charging indicator, UV-C lighting switch, and USB-C charging port.
Figura 5.1: Overview of the charging cabinet features, including LED indicators and USB-C ports.
Internu view of the Digitus DN-45004 charging cabinet with multiple tablets connected to USB-C cables and charging.
Figure 5.2: Devices being charged inside the cabinet.

5.2 UV-C Lamp Operazione

L'UV-C integratuamps provide a sterile environment for your devices.

  1. Activate UV-C: Locate the switch for UV-C lighting (refer to Figure 5.1). Toggle the switch to activate the UV-C lamps.
  2. Ensure Door is Closed: For safety and effective sanitation, ensure the cabinet door is securely closed while the UV-C lamp hè attivu.
  3. Deactivate UV-C: Toggle the switch again to turn off the UV-C lamps.
Internu view of the Digitus DN-45004 charging cabinet with the UV-C lamp illuminated, showing a blue glow.
Figure 5.3: Interior with UV-C light active.
Primu pianu view di l'UV-C lamp installed inside the Digitus DN-45004 charging cabinet.
Figure 5.4: Close-up of the UV-C lamp.

5.3 Sistema di rinfrescante

The cabinet includes an integrated fan and ventilation slots for active cooling. The fan automatically activates when the internal temperature exceeds 40°C to prevent overheating of devices and internal components.

6. Mantenimentu

7. Risoluzione di prublemi

PrublemuCausa PossibileSoluzione
Cabinet does not power on.Power cable not connected, power outlet issue, or internal circuit breaker tripped.Ensure power cable is firmly connected. Test the power outlet. Check and reset the internal circuit breaker (refer to Section 4. Setup).
U dispusitivu ùn hè micca carica.Device not properly connected, faulty USB-C cable, or device issue.Ensure the device is correctly plugged into the USB-C port. Try a different USB-C cable. Test the device with another charger. Check the LED indicator (should be red when charging).
UV-C lamp ùn si accende micca.UV-C switch off, lamp failure, or door not fully closed.Ensure the UV-C switch is in the 'On' position. Verify the cabinet door is securely closed. If the issue persists, the lamp pò esse bisognu di rimpiazzamentu.
Laptops do not fit in the slots.The cabinet is designed for smaller portable devices.This model is optimized for tablets and smartphones. Please check device dimensions against cabinet specifications.

8. Specificazioni

FeatureDetail
MarcaDIGITU
Numero di mudelluDN-45004
CuloreNeru (RAL 9005)
MaterialeAlloy Steel
Dimensioni (H x L x P)345 x 360 x 370 mm
Internal Shelf Depth294 mm
Porti di carica USB-C10
USB-C Output per Port18 W (5 V / 3 A, 9 V / 2 A, 12 V / 1.5 A)
Max USB-C Output180 W
Input di putenzaC19; 110 / 220 VAC, 50/60 Hz, 16 A
Pruduzione Totale di Potenza3500 W
CoolingIntegrated fan, automatic activation at >40°C
SicurezzaSteel front door with 3-point lock
Funzioni spicialiUV-C lamps for hygiene, LED charging indicators
Dispositivi compatiblesSmartphones, Tablet

9. Garanzia è Support

Warranty information for the Digitus DN-45004 Mobile Desktop Charging Cabinet is not available in the provided product data. Please refer to the manufacturer's official website or your point of purchase for detailed warranty terms and conditions.

For technical support, troubleshooting assistance, or inquiries regarding spare parts, please contact DIGITUS customer service directly. You can often find contact information on the manufacturer's websitu o in l'imballu di u produttu.

For more information about DIGITUS solutions, visit: Assmann Solutions