Waveshare EM060K-GL

Waveshare Quectel EM060K-GL Module User Manual

Model: EM060K-GL | Brand: Waveshare

1. Introduzione

The Waveshare Quectel EM060K-GL is an advanced LTE-A Cat 6 module designed with an M.2 form factor. It offers robust global multi-band GNSS positioning capabilities and supports DL 2 Carrier Aggregation and 64QAM for enhanced data rates. This module provides worldwide LTE-A and UMTS/HSPA+ coverage, featuring a low power mode for energy efficiency. Its integrated multi-constellation GNSS receiver ensures fast and accurate positioning in diverse environments, while MIMO technology enhances data rate and link reliability in modern wireless communication systems.

Quectel EM060K-GL Module overview

Figura 1: Overview of the Quectel EM060K-GL Module, highlighting its branding and model number.

2. Funzioni chjave

Features at a glance for EM060K-GL module

Figure 2: Visual representation of the EM060K-GL module's key features and capabilities.

  • LTE-A Cat 6 Module: Utilizes an M.2 form factor for compact integration.
  • Agregazione di carrier: Supports DL 2 Carrier Aggregation and 64QAM for improved data throughput.
  • Copertura Globale: Provides worldwide LTE-A and UMTS/HSPA+ network coverage.
  • Modu di bassa putenza: Designed for power efficiency, reducing energy consumption.
  • GNSS integratu: Features a multi-constellation GNSS receiver for precise and rapid positioning.
  • Tecnulugia MIMO: Incorporates MIMO for enhanced data rates and link reliability in wireless communications.

3. Setup è Installazione

This section outlines the general steps for installing the EM060K-GL M.2 module. Always refer to the host device's manual for specific installation instructions.

  1. Preparate u dispusitivu ospitante: Ensure the host device (e.g., laptop, router, industrial PC) is powered off and disconnected from any power source.
  2. Truvà u slot M.2: Identify the available M.2 slot on your host device's motherboard. The EM060K-GL module is compatible with M.2 Key B slots.
  3. Inserite u Modulu: Gently insert the EM060K-GL module into the M.2 slot at a 30-degree angle. Apply even pressure until the module is fully seated.
  4. Assicurà u Modulu: Press the module down and secure it with the provided screw (usually included with the host device or module accessory kit) to hold it in place.
  5. Connect Antennas (if applicable): If your host device and module require external antennas for LTE/GNSS, carefully connect them to the appropriate connectors on the module.
  6. Chjude u dispusitivu: Reassemble your host device, ensuring all covers are properly secured.
  7. Accende è installa i driver: Power on the host device. You may need to install specific drivers for the Quectel EM060K-GL module. These drivers are typically available from the Waveshare or Quectel official websiti.
Torna view of EM060K-GL M.2 module

Figura 3: Posteriore view of the EM060K-GL module, showing the M.2 connector pins and mounting notch.

4. Operating Instructions

Once the EM060K-GL module is installed and drivers are in place, follow these general steps for operation:

  1. Verificazione di u cunduttore: Confirm that the necessary drivers are correctly installed and the module is recognized by the operating system. Check Device Manager on Windows or use lsusb/lspci commands on Linux.
  2. Inserzione di carta SIM: If using cellular connectivity, ensure a valid and activated SIM card is inserted into the host device's SIM card slot (if available and connected to the module).
  3. Configurazione di a rete: Configure your network settings. This typically involves selecting the cellular network, setting up an Access Point Name (APN), and enabling mobile data. Refer to your operating system's network settings or your router's interface.
  4. GNSS Functionality: For GNSS positioning, ensure the module has a clear view of the sky (if external antenna is used) and that GNSS services are enabled in your application or operating system.
  5. Monitoraghju: Use diagnostic tools or software provided by Quectel or your host device manufacturer to monitor signal strength, data usage, and GNSS status.

5. Mantenimentu

Proper maintenance ensures the longevity and optimal performance of your EM060K-GL module.

  • Mantene asciuttu: Protect the module from moisture and liquids. Water damage can lead to malfunction.
  • Pulisce delicatamente: If cleaning is necessary, use a soft, dry cloth. Avoid harsh chemicals or abrasive materials. Ensure the device is powered off before cleaning.
  • Evitate e scariche statiche: When handling the module outside of its host device, always use anti-static precautions (e.g., anti-static wrist strap) to prevent damage from electrostatic discharge.
  • Controlu di a temperatura: Operate the module within its specified temperature ranges to prevent overheating or performance degradation.
  • Actualizazioni di firmware: Periodically check the Waveshare or Quectel website for firmware updates. Applying updates can improve performance, add features, or fix bugs.

6. Risoluzione di prublemi

If you encounter issues with your EM060K-GL module, consider the following troubleshooting steps:

  • Modulu micca rilevatu:
    • Ensure the module is correctly seated in the M.2 slot.
    • Verify that the host device's BIOS/UEFI settings recognize the M.2 slot.
    • Check if the necessary drivers are installed.
  • Nisuna cunnessione di rete:
    • Confirm the SIM card is properly inserted and activated.
    • Check APN settings and network configuration in your operating system or router.
    • Ensure antennas are securely connected (if applicable) and have a clear signal path.
    • Verify that your cellular plan is active and has data allowance.
  • Forza di u Signale Poveru:
    • Relocate the host device to an area with better cellular coverage.
    • Ensure external antennas (if used) are positioned optimally and are not obstructed.
    • Check antenna connections for looseness or damage.
  • GNSS Not Functioning:
    • Assicurà u dispusitivu hà un chjaru view of the sky for satellite reception.
    • Verify that GNSS services are enabled in your application or operating system.
    • Check for any physical obstructions or interference sources.
  • Surriscaldamentu di u modulu:
    • Ensure adequate airflow around the module and host device.
    • Verify that the module is operating within its specified temperature range.
    • Reduce workload if possible.

If these steps do not resolve the issue, please contact Waveshare technical support for further assistance.

7. Specificazioni

Detailed technical specifications for the Waveshare Quectel EM060K-GL module.

Detailed specifications table for EM060K-GL module

Figure 4: Comprehensive table detailing the technical specifications of the EM060K-GL module, including frequency bands and data rates.

EM060K-GL Module Specifications
FeatureDetail
MarcaWaveshare
Numero di mudelluEM060K-GL
Fattore di formaM.2
Tecnulugia di cunnessioneUSB
Categoria LTECat 6 (LTE-A)
Agregazione di CarrierDL 2CA, 64QAM
Supportu GNSSIntegrated multi-constellation (GPS, GLONASS, BDS, Galileo)
Temperature di funziunamentu-30 °C ~ +70 °C
Extension Temperature-40 °C ~ +85 °C
Dimensioni42.0 x 30.0 x 2.3 mm
Alimentazione elettrica3.135V ~ 4.4V, typical 3.7V
Cunsigliu Inpunutu16.57mA (tipica)
Spegni u cunsumu di energia62 µA (typical)
Dispositivi compatiblesLaptop, Router
Dimensions of the EM060K-GL module

Figure 5: Physical dimensions of the EM060K-GL module in millimeters.

8. Scenarii Applicazioni

The EM060K-GL module is designed for a wide range of industrial and commercial applications requiring reliable LTE-A connectivity and GNSS positioning.

Various application scenarios for EM060K-GL module

Figura 6: Esamples of environments and devices where the EM060K-GL module can be utilized, including industrial routers, laptops, and digital signage.

  • Industrial Routers: Providing robust cellular connectivity for remote monitoring and control.
  • Home Gateways: Enabling high-speed internet access in residential settings.
  • Set Top Boxes: Integrating cellular data for smart TV and media applications.
  • Industrial Laptops & PDAs: Offering mobile connectivity for field operations and data collection.
  • Rugged Industrial Tablet PCs: Ensuring reliable communication in harsh environments.
  • Segnaletica digitale: Providing remote content updates and management for advertising displays.

9. Garanzia infurmazione

Waveshare products typically come with a standard limited warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and product. Please retain your proof of purchase for warranty claims.

For detailed warranty information, please refer to the official Waveshare website or contact their customer service directly. Unauthorized modifications or improper use of the module may void the warranty.

10. Support tecnicu

For technical assistance, driver downloads, firmware updates, or any inquiries regarding the EM060K-GL module, please visit the official Waveshare support resources:

  • Ufficiale Websitu: www.waveshare.com
  • Product Wiki/Documentation: Cerca "EM060K-GL" on the Waveshare Wiki for detailed documentation and resources.
  • Cuntattate l'assistenza: Refer to the "Contact Us" section on the Waveshare website for email, phone, or forum support options.

When contacting support, please have your product model number (EM060K-GL) and a detailed description of your issue ready.

Documenti cunnessi - EM060K-GL

Preview Guida di l'utente di u driver Linux Waveshare RG500U-CN è RM500U-CN
Una guida cumpleta per l'integrazione di i moduli RG500U-CN è RM500U-CN 5G di Waveshare cù i sistemi Linux, chì copre a cunfigurazione di i driver di carte USB-à-seriale è di rete, i test di cumandamenti AT è a risoluzione di i prublemi.
Preview Manuale d'usu è guida di Waveshare SX1262 LoRaWAN/GNSS HAT
Una guida cumpleta à u Waveshare SX1262 LoRaWAN/GNSS HAT, chì copre e so caratteristiche, i parametri tecnichi, a cunnessione hardware, a definizione di pinout, a cunfigurazione di u software, i cuncetti LoRaWAN è l'integrazione cù The Things Network (TTN).
Preview Manuale d'usu di u modulu LCD Waveshare da 2.4 pollici
Una guida cumpleta à u modulu di visualizazione LCD TFT Waveshare di 2.4 pollici, chì detalla e so caratteristiche, specifiche è usu cù Raspberry Pi, STM32 è Arduino. Amparate nantu à l'interfaccia SPI, u controller IL9341, e cunnessione hardware è u software.amples per integrà stu display di risoluzione 240x320 in i vostri prughjetti.
Preview 0.91inch OLED Module User Manual - Waveshare
User manual for the Waveshare 0.91inch OLED Module (128x32 pixels) with SSD1306 controller. Covers overview, features, pinout, I2C communication, and demo code for STM32, Raspberry Pi (BCM2835, WiringPi, Python), and Arduino.
Preview Manuale d'usu di u Modulu Relè Industriale à 8 Canali Waveshare per Raspberry Pi Pico
Manuale d'usu per u Modulu di Relè Industriale à 8 Canali Waveshare per Raspberry Pi Pico (Pico-Relay-B). Dettagli nantu à e caratteristiche, a cumpatibilità, a custodia è u pinout per applicazioni di cuntrollu industriale.
Preview Pico-Relay-B: Guida di l'utente di u modulu di relè à 8 canali
Guida di l'utente per u Waveshare Pico-Relay-B, un modulu di relè industriale à 8 canali per Raspberry Pi Pico. Amparate e so caratteristiche, specifiche, cunfigurazione è prugrammazione cù struzzioni dettagliate è esempi.amples.