Introduzione
Thank you for choosing the AQQA Aquarium Clip-On LED Light. This manual provides essential information for the proper installation, operation, and maintenance of your new aquarium light. Designed for freshwater aquariums, this 8W LED light offers full spectrum illumination, a 24/7 sunrise/sunset mode, and adjustable brightness levels to create an optimal environment for your aquatic life.
Informazioni di sicurezza
- Scollegate sempre l'alimentazione elettrica prima di fà qualsiasi manutenzione o pulizia.
- Ensure your hands are dry when handling the power adapter and controller.
- Do not immerse the power adapter or controller in water. The lamp panel is waterproof, but other components are not.
- Mantene u pruduttu fora di a portata di i zitelli.
- Do not attempt to modify or repair the light. Contact customer support for assistance.
- Assicuratevi chì l'alimentazione di l'alimentazione voltage matches the product's requirements (AC100-240V).
Istruzzioni di stallazione
- Assembla l'Lamp: Slide u lamp corpu in lamp holder until it is securely seated.
- Attach to Aquarium: Position the clip-on bracket onto the edge of your aquarium glass. Ensure the bracket is nested firmly on the wall of the fish tank.
- Assicurà u supportu: Tighten the screws on the bracket to secure the light firmly to the aquarium. The bracket is designed to fit various tank thicknesses without causing damage.
- Ajuste Lamp Posizione: U lamp body and holder are flexible. Adjust the extension length of the lamp freely to achieve desired coverage over your aquarium. The lamp body can also be completely removed from the bracket for alternative placement on a tank with a transparent glass cover.
- Connect Power: Connect the USB cable from the light to the provided adapter. Plug the adapter into a standard electrical outlet. The light can also be powered by other USB power sources such as a power bank or laptop.
Figura 1: Passi d'installazione
Figure 2: Clip-on Mechanism and Tank Compatibility
Istruzzioni di funziunamentu
The AQQA Aquarium Clip-On LED Light features an inline controller with multiple buttons for various functions:
- Pulsante ON/OFF: Accende o spegne a luce.
- W+ Button (White Light Brightness): Adjusts the brightness of the white light. There are 10 adjustable brightness levels (10% to 100%).
- B+ Button (Blue/Red Light Brightness): Adjusts the brightness of the blue and red lights. There are 10 adjustable brightness levels (10% to 100%).
- M Button (Mode Selection): Cycles through the three lighting color modes:
- White + Green Light Mode
- Blue + Red Light Mode
- White + Red + Blue + Green Light Mode (Full Spectrum)
- Pulsante TIMER: Sets the daily timing function. Press to cycle through 6H, 10H, or 12H timer settings. Once set, the light will automatically cycle on/off at the same time each day. For example, if set for 6 hours at 9:20 AM, it will turn off at 3:20 PM and turn on again at 9:20 AM the next day.
- Sunrise/Sunset Button: Activates the 24/7 Sunrise and Sunset Mode.
Figure 3: Controller Overview
24/7 Sunrise and Sunset Mode
This mode provides a natural light cycle for your aquarium. In this mode, the light operates in full spectrum, and brightness cannot be manually adjusted. The cycle is divided into four stages:
- Stage 1 (Sunrise): Light brightness gradually increases from 5% to 100% over 3 hours.
- Stage 2 (Daylight): Maintains 100% brightness for 6 hours.
- Stage 3 (Sunset): Light brightness gradually decreases from 100% to 5% over 3 hours.
- Stage 4 (Night): Light transitions from 5% full spectrum to 5% blue light mode and maintains for 4 hours, then turns off.
Figure 4: 24/7 Sunrise and Sunset Mode Cycle and Color Modes
Funzione di memoria
The light retains your last selected color mode and brightness settings even after power disconnection. However, the timing function (6H, 10H, 12H, and Sunrise/Sunset mode) does not have a memory function and must be reset if power is interrupted.
Figure 5: Memory Function Details
Mantenimentu
Regular maintenance ensures optimal performance and longevity of your AQQA Aquarium Clip-On LED Light.
- Pulizia: Asciugà periodicamente u lamp body and LED panel with a soft, damp cloth to remove dust, water spots, or algae buildup. Ensure the light is unplugged before cleaning.
- Impermeabilizazione: U lamp panel is designed with glue filling to enhance waterproofing. However, avoid submerging the entire unit or exposing the controller and adapter to water.
- Ispezione di u cable: Regularly check the power cable and connections for any signs of damage or wear. If any damage is observed, discontinue use and contact customer support.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A luce ùn accende micca. | Nisuna alimentazione; cunnessione lenta; adattatore difettuosu. | Check if the adapter is properly plugged into the outlet and the USB cable is securely connected. Try a different USB power source or outlet. |
| A funzione di timing ùn funziona micca currettamente. | Power interruption; incorrect setting. | The timing function resets after a power cut. Re-set the desired timer (6H, 10H, 12H) or 24/7 mode. Ensure the button was pressed correctly. |
| Brightness or color mode cannot be adjusted. | Light is in 24/7 Sunrise/Sunset Mode. | In 24/7 mode, brightness and color are automatically controlled. Exit 24/7 mode to manually adjust brightness and color. |
| A luce tremola o s'affiebilisce inaspettatamente. | Unstable power supply; loose connection; internal fault. | Ensure power connections are secure. Try a different power source. If the issue persists, contact customer support. |
Specificazioni di u produttu
Figure 6: Product Parameters for 8W Model
| Feature | Detail |
|---|---|
| Nome di mudellu | AQQA Aquarium Clip on Light AQ059 |
| Wattage | 8 watts |
| Input Voltage | AC100-240V |
| Uscita Voltage | DC5V |
| Tipu di fonte di luce | LED (18 PCS: 2 Red, 2 Green, 2 Blue, 12 White 6500K) |
| Lumen | 339 |
| Temperature di culore | 6500K |
| Product Dimensions (Light only) | 5.5 "D x 1.97" W x 0.31 "H |
| Overall Dimensions (with bracket) | 5.5 "D x 1.97" W x 4.25 "H |
| Pesu di l'articulu | 0.3 kilogrammi (10.6 ounces) |
| Fonte d'energia | Corded Electric (USB and Adapter) |
| Lunghezza di u cordone di alimentazione | 5 piedi (1.54 m) |
| Tipu di muntatura | Clip-on |
| Livellu di resistenza à l'acqua | Waterproof (lamp pannellu) |
| Cumpunenti inclusi | 1*Clip on light + 1*ABS brackets + 1* Adapter |
Garanzia è Supportu
This AQQA Aquarium Clip-On LED Light comes with a Garanzia di u fabricatore di 1 anni da a data di compra.
For any questions, concerns, or technical assistance, please contact AQQA customer support. Please have your model number (AQ059) and purchase information available when contacting support.
We are committed to providing long-term quality after-sales service.
