1. Introduzione
This manual provides detailed instructions for the installation and operation of your KICKER CS Series 46CSC654 6.5-inch Speaker Upgrade Kit for Kia Forte (2019-2024). Please read this manual thoroughly before beginning installation to ensure proper setup and optimal performance.
U kit include:
- Two KICKER 46CSC654 6.5-inch CS Series 2-Way Coaxial Car Speakers
- Two Vixen Go VGH-72-7302 Speaker Harnesses
- Two Vixen Go VGB6703 Speaker Mounting Adapters
2. Informazioni di sicurezza
Always disconnect the vehicle's battery before performing any electrical work. Ensure all connections are secure to prevent short circuits. If you are unsure about any step, consult a professional car audio installer.
Disclaimer:
Compatibility is based on available vehicle information. Vehicle specifications can differ due to specific trims or premium audio systems. Always verify fitment for your specific vehicle. Professional installation is recommended to ensure the kit does not interfere with window operation or other OEM parts. Retain all factory screws and fasteners as they may be required for installation.
Image: OEM Speaker Kit Disclaimer. This image displays a warning regarding vehicle compatibility and the importance of professional installation, advising users to retain factory parts.
3. Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione:
- 2 x KICKER 46CSC654 6.5-inch Coaxial Speakers
- 2 x Vixen Go Speaker Harnesses (VGH-72-7302)
- 2 x Vixen Go Speaker Mounting Adapters (VGB6703)
Image: KICKER CS Series Speaker Kit Components. This image shows the complete kit, including two KICKER 6.5-inch coaxial speakers, two speaker harnesses, and two speaker mounting adapters, along with a KICKER branded koozie.
4. Setup è Installazione
This section outlines the general steps for installing the KICKER CS Series speakers in your Kia Forte (2019-2024). Specific vehicle disassembly instructions are not provided here and may require consulting your vehicle's service manual or an online resource.
4.1 Strumenti necessarii
- Strumenti di rimozione di pannelli
- Cacciavite (Phillips è Flathead)
- Set di chiavi a presa
- Wire strippers/crimpers (if custom wiring is needed, though harnesses are included)
- Occhiali di sicurità
4.2 Passi di stallazione
- Disconnect Battery: Before starting any work, disconnect the negative terminal of your vehicle's battery to prevent electrical shorts.
- Remove Door Panels: Carefully remove the door panels where the speakers are to be installed. Refer to your vehicle's specific instructions for this step.
- Eliminate l'altoparlanti di fabbrica: Unscrew and remove the existing factory speakers from their mounting locations. Disconnect the factory wiring harness.
- Install Mounting Adapters: Attach the Vixen Go VGB6703 speaker mounting adapters to the KICKER 46CSC654 speakers. Ensure a secure fit.
Image: Vixen Go Speaker Mounting Adapters. This image shows two black, circular speaker mounting adapters designed to adapt aftermarket speakers to factory openings.
- Connect Speaker Harnesses: Connect the Vixen Go VGH-72-7302 speaker harnesses to the KICKER speakers. Then, connect the other end of the harness to the vehicle's factory speaker wiring. These harnesses are designed for plug-and-play installation, eliminating the need for cutting factory wires.
Image: KICKER CS Series Speaker Front View. This image provides a close-up of the front of a KICKER CS Series 6.5-inch coaxial speaker, highlighting the tweeter and woofer cone.
Image: KICKER CS Series Speaker Side ViewQuesta imagine mostra u latu profile of a KICKER CS Series 6.5-inch speaker, illustrating its mounting depth and magnet structure.
Image: Vixen Go Speaker Harnesses. This image displays two white and black speaker harnesses with red spade connectors, designed for connecting aftermarket speakers to factory wiring without cutting.
- Muntà novi altoparlanti: Secure the KICKER speakers (with adapters) into the factory speaker openings using the appropriate screws. Ensure they are firmly mounted.
- Sistema di prova: Before reassembling the door panels, reconnect the vehicle's battery and test the audio system to ensure both speakers are functioning correctly.
- Reassemble Door Panels: Once confirmed, carefully reattach the door panels, ensuring all clips and screws are properly secured.
5. Funziunamentu di i vostri altoparlanti
Once installed, your KICKER CS Series speakers will operate as part of your vehicle's existing audio system. No special operation is required beyond using your car's head unit or stereo controls.
- Controlu di u voluminu: Adjust volume via your car's stereo.
- Cuntrollu di u Tonu: Utilize your stereo's bass, treble, and balance controls to customize the sound to your preference.
- Periudu di robba: Allow for a brief break-in period (approximately 10-20 hours of listening) at moderate volumes for the speakers to achieve their optimal sound performance.
6. Mantenimentu
KICKER CS Series speakers are designed for durability and require minimal maintenance.
- Pulizia: Use a soft, dry cloth to gently wipe the speaker grilles and surrounds if they become dusty. Avoid using harsh chemicals or abrasive cleaners.
- Ispezione: Periodically check speaker mounts and connections for any looseness, especially after driving on rough terrain.
- Fattori ambientali: While the speakers feature UV-treated poly-foam surrounds, extreme temperatures and direct prolonged sunlight should be minimized where possible to extend lifespan.
7. Risoluzione di prublemi
If you encounter issues with your KICKER CS Series speakers, refer to the following common problems and solutions:
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Nisun sonu da i diffusori |
|
|
| Sonu distortu |
|
|
| Sonu intermittente |
|
|
If troubleshooting steps do not resolve the issue, contact KICKER customer support or a certified car audio technician.
8. Specificazioni
| Nome di mudellu | CSC654 (46CSC654) |
| Tipu di parlante | Coassiale, 2 vie |
| Size Speaker | 6.5 inch |
| Manipulazione di Peak Power | 300 Watt |
| Gestione di l'energia RMS | 100 Watt |
| Impedenza | 4 Ohms |
| Sensibilità | 90 dB |
| Risposta di Frequency | 40-20,000 Hz |
| Magnet Woofer | Motore robustu |
| Tweeter Construction | PEI with Neodymium magnets |
| Materiale Circundante | UV-treated poly-foam |
| Prufundità di montaggio superiore | 1-11/16 inch |
| Material (Adapters) | Acrilonitrile Butadiene Stirene (ABS) |
| Dimensioni di u produttu | 7"D x 15"W x 12"H (Package) |
| Pesu di l'articulu | 5.37 pounds (Package) |
9. Garanzia infurmazione
This KICKER product comes with a Full Warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the official KICKER warranty documentation included with your purchase or visit the official KICKER websitu.
Conservate a vostra prova d'acquistu per e richieste di garanzia.
10. Supportu è cuntattu
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact KICKER customer support:
- Websitu: www.kicker.com
- Telefonu: Refer to the KICKER websitu per i numeri di cuntattu regiunale.
When contacting support, please have your product model number (46CSC654+KF1920SHA) and proof of purchase readily available.
