Agri-Fab 100 lb. Tow-Behind Spiker/Seeder/Drop Spreader Instruction Manual

1. Produttu Finituview

The Agri-Fab 100 lb. Tow Spiker/Seeder/Drop Spreader (Model #45-05431) is designed to help maintain and improve your lawn by efficiently spreading seed, fertilizer, salt, or ice melt, and aerating the soil. This versatile tool is intended to be pulled behind lawn and garden tractors, offering a controlled spreading width of 32 inches.

With a 100 lb. capacity, this unit can cover up to 17,500 square feet in a single fill, depending on the material and application speed. It features 8 galvanized steel spike disks for thorough aeration, 10-inch flat-free tires for smooth transport, and a steel lift handle for easy height adjustment and precise control.

Figura 1: In generale view of the Agri-Fab 100 lb. Tow-Behind Spiker/Seeder/Drop Spreader.

Funzioni chjave:

• Made in USA
• 100 lb. capacity, 32-inch working width
• 8 galvanized steel spike disks for thorough aeration
• 10-inch flat-free tires
• Galvanized steel agitator, capable of aerating and seeding in one pass

2. Informazioni di sicurezza

Always read and understand the entire instruction manual before operating the spiker/seeder/drop spreader. Failure to follow safety instructions can result in serious injury or property damage.

Precauzioni Generali di Sicurezza:

• Leghjite u Manuale: Familiarizatevi cù i cuntrolli è l'usu currettu di l'attrezzatura.
• Equipamentu di prutezzione persunale (PPE): Wear appropriate safety glasses, gloves, and sturdy footwear when assembling, operating, or maintaining the unit.
• Spaziu Chjaru: Ensure the area is clear of bystanders, especially small children and pets, before operating.
• Allegatu sicuru: Always ensure the spreader is securely attached to the towing vehicle before operation.
• Manipolazione di i materiali: Use caution when handling and loading materials. Avoid overfilling the hopper.
• Operazione di Pendenza: Exercise extreme caution when operating on slopes. Avoid steep inclines where the unit could tip.
• Mantenimentu: Perform all maintenance as instructed. Disconnect from the towing vehicle before performing any adjustments or repairs.
• Conservazione: Store the unit in a safe, dry place, out of reach of children.

ATTENZIONE: Stu pruduttu pò espone vi à sustanzi chimichi, cumpresi u piombu è i cumposti di piombu, chì sò cunnisciuti da u Statu di California per causà cancru è difetti di nascita o altri danni riproduttivi. Per più infurmazioni andate à www.P65Warnings.ca.gov.

3. Assemblea

Assembly of your Agri-Fab Spiker/Seeder/Drop Spreader requires careful attention to detail. While the process involves multiple components, following the instructions systematically will ensure correct setup. It is recommended to have a clear, flat workspace and the necessary tools readily available.

Passi di l'Assemblea Generale:

1. Unpack Components: Carefully remove all parts from the packaging and verify against the parts list (not provided in this manual, refer to manufacturer's included documentation).
2. Assemble Frame: Connect the main frame components, ensuring all bolts and nuts are securely fastened.
3. Attaccà i roti: Mount the 10-inch flat-free wheels to the axle, ensuring they rotate freely.
4. Install Hopper: Secure the 100 lb. capacity poly hopper to the frame.
5. Mount Spiker/Agitator Assembly: Install the galvanized steel spike disks and agitator mechanism. Ensure the chain drive system is correctly aligned and tensioned.
6. Attach Control Handles: Secure the steel lift handle and flow control lever to the appropriate positions.
7. Verifiche finali: Before use, double-check all connections for tightness and ensure all moving parts operate smoothly without binding.

Figura 2: Fronte view, showing the hopper and wheel assembly.

Figura 3: Side view, highlighting the overall structure and handle.

Figura 4: Posteriore view, showing the tow hitch and spiker mechanism.

4. Operazione

Proper operation of your spiker/seeder/drop spreader ensures effective lawn care and extends the life of the unit. This section outlines the steps for preparing and using the equipment.

Preparazione per l'operazione:

1. Attach to Tractor: Securely attach the spreader to the hitch of your lawn or garden tractor. Ensure the hitch pin is properly inserted and secured.
2. Materiale di carica: Fill the 100 lb. capacity hopper with your desired material (seed, fertilizer, salt, or ice melt). Do not overfill.


Figure 5: The hopper filled with grass seed, ready for spreading.

3. Set Flow Rate: Adjust the flow control lever to the desired setting based on the material type and desired application rate. Refer to the material manufacturer's recommendations for specific settings.

Figura 6: Detailed view of the flow setting dial on the spreader.


Figure 7: A user adjusting the flow setting lever for precise material distribution.

4. Adjust Spiker Height: Use the steel lift handle to raise or lower the spike disks. For aeration, ensure the spikes are engaged with the ground. For spreading only, the spikes can be disengaged if preferred, though simultaneous aeration and spreading is a key feature.

Operating the Spreader:

• Muvimentu di partenza: Begin moving the towing vehicle at a consistent, moderate speed. The agitator and spiker disks are driven by the wheels, so movement is necessary for operation.
• Engage Spreading: Once moving, open the flow gate using the control lever to begin spreading material.
• Maintain Overlap: For even coverage, overlap each pass slightly. The 32-inch working width provides a good guide.
• Turning: Close the flow gate when making turns or stopping to prevent over-application in one area.
• Svuotamentu : Continue operating until the hopper is empty or the desired area is covered.

Figure 8: Dimensional diagram of the Agri-Fab Spiker/Seeder/Drop Spreader, indicating its length and width.

Optimal Usage Times:

• Primavera: Ideal for spreading grass seed over bare areas and initial fertilization.
• Estate: Use for additional fertilization and feeding as needed to enhance growth.
• Fall/Winter: Effective for spreading salt or ice melt on pathways and driveways.

5. Mantenimentu

Regular maintenance is crucial for the longevity and optimal performance of your Agri-Fab Spiker/Seeder/Drop Spreader.

Dopu à ogni usu:

• Pulite accuratamente: Empty any remaining material from the hopper. Rinse the hopper and all spreading components with water to prevent corrosion and material buildup. Ensure all parts are dry before storage.
• Inspect Spikes and Agitator: Check the galvanized spike disks and agitator for any damage, bending, or excessive wear. Clean off any debris.
• Lubricate: Apply a light coat of lubricant to all moving parts, including the axle, chain, and pivot points of the control levers, to ensure smooth operation and prevent rust.

Mantenimentu di stagione:

• Verificate i dispositivi di fissaggio: Periodically check all nuts, bolts, and fasteners for tightness and re-tighten as necessary.
• Ispettà i pneumatici: Examine the 10-inch flat-free tires for any signs of wear or damage.
• Conservazione: Store the unit in a clean, dry area, protected from the elements. If storing for an extended period, ensure it is thoroughly cleaned and lubricated.

6. Risoluzione di prublemi

This section provides solutions to common issues you might encounter with your spiker/seeder/drop spreader.

7. Specificazioni

8. Garanzia è Support

Informazione di garanzia:

The Agri-Fab 100 lb. Tow Spiker/Seeder/Drop Spreader (Model #45-05431) comes with a Garanzia limitata di 3 anniQuesta garanzia copre i difetti di materiali è di fabbricazione in cundizioni d'usu è di serviziu nurmali. Per piacè cunservate a vostra prova d'acquistu per e richieste di garanzia.

For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Agri-Fab websitu.

Assistenza Clienti:

If you have any questions regarding assembly, operation, maintenance, or troubleshooting that are not covered in this manual, please contact Agri-Fab customer support.

• Websitu: Visit the official Agri-Fab websitu per FAQ, registrazione di prudutti è risorse supplementari.
• Telefonu: Refer to the contact information provided on the product packaging or the Agri-Fab websitu per i numeri di telefonu di u serviziu clienti.
• Parts: For replacement parts, please have your model number (45-05431) and the part number ready when contacting support.

Note: Always use genuine Agri-Fab replacement parts to ensure compatibility and maintain product warranty.