1. Introduzione
Thank you for choosing PAUTIX 5V USB COB LED Strip Lights. This manual provides essential information for the safe and efficient use of your LED strip lights. Please read these instructions carefully before installation and operation.
Cuntenutu di u pacchettu:
- 1 x PAUTIX 5V USB COB LED Strip Light (6.56ft / 2m, 3000K Warm White)
- 1 x RF Wireless Remote Control
- 1 x USB Power Cable with In-line 3-button Dimmer
Image: Contents of the PAUTIX LED strip light package, showing the coiled strip, USB cable with in-line dimmer, and RF remote control.
2. Informazioni di sicurezza
- Certificatu UL: This product is UL-Listed, ensuring compliance with safety standards.
- Low Voltage: Operates on 5V DC, making it safe to touch for pets and children.
- Solu l'usu di l'internu: The LED strip has an IP30 rating and is designed exclusively for indoor environments. Avoid exposure to water or high humidity.
- Fonte di energia: Use only with a 5V/2A (or higher) USB power source. Insufficient power may cause flickering or improper operation.
- Installazione: Ensure the mounting surface is clean, dry, and smooth for optimal adhesive performance.
- Tagliu: The strip can be cut at designated marks (every 12mm/0.47in). Cutting at non-marked points will damage the circuit.
- Calore: While COB LEDs produce minimal heat, ensure proper ventilation when installed in enclosed spaces.
3. Setup è Installazione
- Preparate a superficia: Clean the desired mounting surface thoroughly to remove dust, oil, or moisture. A clean, dry, and smooth surface ensures strong adhesion.
- Misura è taglia (opzionale): If a shorter length is required, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads).
Image: Diagram showing the cuttable sections of the LED strip, marked every 12mm/0.47in, with a pair of scissors indicating where to cut.
- Supportu adesivo amovibile: Carefully peel off the protective film from the 3M self-adhesive backing on the LED strip.
- Attaccate a striscia: Press the LED strip firmly onto the prepared surface, ensuring even contact along its entire length.
Image: Four-step visual guide demonstrating how to install the LED strip: clean the surface, peel the backing, paste the strip, and turn on the light.
- Connect Power: Plug the USB connector of the LED strip into a compatible 5V/2A (or higher) USB power source (e.g., TV USB port, computer, power bank, USB wall adapter).
Image: Various USB power sources compatible with the PAUTIX LED strip, including a USB charger, power bank, laptop/TV, 5V battery pack, and USB socket.
4. Operating Instructions
RF Wireless Remote Control:
The included RF remote control allows for convenient operation from a distance, even without direct line of sight (360° control). It features:
- On/Off: Accende o spegne e luci.
- Ajustamentu di luminosità: Increase or decrease brightness (5 levels).
- Funzioni timer: Set the lights to turn off automatically after 30 minutes, 1 hour, 2 hours, 3 hours, or 4 hours. Press 'C' to cancel the timer.
- Funzione di memoria: The lights will restore to their last brightness setting when turned back on.
Image: The PAUTIX LED strip light coiled with the RF wireless remote control and USB power cable visible. The remote shows buttons for power, brightness, and timer settings.
Image: A child sleeping with the LED strip lights providing soft illumination, illustrating the timer function of the RF remote control.
In-line 3-button Dimmer:
The USB power cable includes an in-line controller with three buttons for basic operation:
- Pulsante di putenza: Turns the lights on/off.
- Brightness Up (+): Aumenta a luminosità.
- Brightness Down (-): Diminuisce a luminosità.
Image: A living room scene with LED strip lights installed, showing the in-line dimmer and its buttons for adjusting brightness from 10% to 100%.
5. Mantenimentu
- Pulizia: Gently wipe the LED strip with a dry, soft cloth if it accumulates dust. Do not use liquid cleaners or immerse in water.
- Adesivo: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface.
- Conservazione: Quandu ùn hè micca aduprata per periodi prolungati, cunservate a striscia LED in un locu frescu è asciuttu, luntanu da a luce diretta di u sole.
6. Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| I luci ùn si accendenu micca. | Nisuna alimentazione, cunnessione libera, porta USB difettosa. |
|
| E luci tremolanu. | Alimentazione insufficiente. |
|
| U cuntrollu remoto ùn funziona micca. | Battery issue, interference. |
|
| Sections of the strip are not lighting up. | Damage to the strip. |
|
7. Specificazioni
- Mudellu: RF-SWW320COB-USB-2M-3000K-NEW
- Marca: PAUTIX
- Tipu di fonte di luce: COB LED
- Temperature di culore: 3000K biancu caldu
- Lunghezza: 6.56 piedi (2 metri)
- LEDs per Meter: 320 LEDs/m (Total 640 LEDs)
- Voltage: 5 Volts (DC)
- Wattage: 9.5 watts
- Flussu luminosu: 1200 lumens
- Indice de rendu des couleurs (CRI) : > 90
- Funzioni speciali: 5V USB Powered, RF Remote Control, UL-Listed, Dimmable, Dotless, Flicker-Free, Memory Function, Timer
- Durata di vita: > 65,000 ore
- Classificazione di Prutezzione di Ingressu (IP): IP30 (solu per l'usu interni)
- Materiale: 3M Adhesive, COB LED Light Source, Double Layer Pure Copper PCB, Plastic
- Lunghezza di u cable di alimentazione: 2.6 pedi
- UPC: 717994811924
8. Garanzia è Support
PAUTIX is committed to customer satisfaction. This product comes with a 5 anni di garanzia, assicurendu qualità è affidabilità.
If you encounter any issues or have questions regarding your PAUTIX LED Strip Lights, please contact our customer support team. We aim to respond within 24 hours and provide a prompt resolution.
Informazioni di cuntattu: Please refer to the product packaging or the official PAUTIX websitu per i dettagli di cuntattu di u serviziu clienti più aggiornati.
