1. Introduzione
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your KIMO Electric Tacker, Model QM-9418. This cordless tool is designed for various fastening tasks, offering both finish nailing and stapling capabilities. Please read this manual thoroughly before initial use and retain it for future reference.
Figure 1: KIMO Electric Tacker QM-9418 and included accessories.
2. Informazioni di sicurezza
Always prioritize safety when operating power tools. Failure to follow these instructions may result in injury or damage to the tool.
- Portate l'equipaggiu di prutezzione individuale (DPI): Always wear safety glasses, hearing protection, and gloves when operating the tacker.
- Sicurezza di l'area di travagliu: Mantene a zona di travagliu pulita è ben illuminata. I spazii scuri o scuri invitanu à l'accidenti.
- Mis-fire Prevention Device: The tool is equipped with a mis-fire prevention mechanism. It will only fire when the contact arm is fully pressed against the workpiece. Do not attempt to bypass this safety feature.
- Three-Step Operation: For precise and safe nailing, follow the three-step process: 1) Press the nailer front against the material, 2) Press the cartridge, 3) Lock with the lock lever.
- Empty Shot Prevention: The tool features an empty shot prevention function, which prevents firing when the magazine is empty, reducing wear and tear and preventing damage to the workpiece.
- Sicurezza di a batteria: Use only KIMO-approved batteries and chargers. Do not expose batteries to extreme temperatures or moisture.
- Manipulazione di l'arnesi: Always hold the tool firmly with both hands during operation. Keep fingers away from the firing mechanism.
3. Produttu Finituview
The KIMO Electric Tacker QM-9418 is a versatile cordless tool designed for various fastening applications. It combines the functionality of a finish nailer and a stapler.
3.1 Cumpunenti
- KIMO Electric Tacker Main Unit
- 20V/2.0Ah Lithium-ion Battery (x2)
- Caricatore di batterie
- Casu protettivu
- Finish Nails (700 pieces, 20-50mm)
- Staples (300 pieces, 4x19-40mm)
- Allen Wrench (for jam clearing)
- Manuale d'istruzzioni
3.2 Funzioni chjave
- Funzionamentu senza filu: Powered by 20V 2.0Ah lithium-ion batteries, eliminating the need for air compressors or power cords.
- Funzionalità 2-in-1: Supports both finish nails (20-50mm) and staples (4x19-40mm).
- Ajustamentu di a prufundità: Easily adjust the nailing depth to suit different materials and desired finishes.
- Modi di tiru duale: Switch between single-shot mode for precision and continuous-shot mode for rapid fastening (up to 80 nails/minute).
- Luce LED integrata: Illumina a zona di travagliu per una migliore visibilità in cundizioni di poca illuminazione.
- Disegnu ergonomicu: Lightweight (2.8kg main unit) and compact with a comfortable grip for extended use.
- Serratura di sicurezza: Prevents accidental firing.
- Dissipazione di u calore à alta efficienza: Designed for stable performance during continuous operation.
4. Setup
4.1 Caricamentu è installazione di a batteria
- Ensure the battery is fully charged before use. Connect the charger to a power outlet and insert the battery. The charger indicator will show the charging status.
- Once charged, slide the battery into the battery slot at the base of the tacker until it clicks securely into place.
- Per caccià a bateria, appughjà u buttone di liberazione è sfilà a bateria fora.
Figure 2: Battery installation and charge indicator.
4.2 Loading Nails or Staples
The KIMO Electric Tacker supports both finish nails and staples. Follow these steps to load fasteners:
- Release the Magazine: Operate the lever to release the magazine.
- Insert Fasteners: Place the strip of nails or staples into the magazine, ensuring they are oriented correctly with the points facing forward.
- Secure a Magazine: Push the magazine back until the snap lock securely engages.
Figure 3: Three-step fastener loading process.
4.3 Adjusting Nailing Depth
The nailing depth can be adjusted to prevent damage to the material surface and achieve the desired finish.
- Locate the depth adjustment dial or lever on the tool.
- Rotate the dial or move the lever to increase or decrease the nailing depth. Test on a scrap piece of material to ensure the correct depth is set.
Figure 4: Depth adjustment mechanism.
5. Operating Instructions
5.1 Selecting Firing Mode
The tacker offers two firing modes: single-shot and continuous-shot.
- Locate the mode selection switch on the tool.
- Sposta u switch à u modu desideratu:
- Modu à colpu unicu: For precise fastening, one fastener is driven per trigger pull.
- Continuous-Shot Mode: For rapid fastening, fasteners are driven continuously as long as the trigger is held and the contact arm is pressed.
Figure 5: Firing mode selection switch.
5.2 Prucedura di inchiodatura
- Ensure the battery is installed and fasteners are loaded.
- Select the appropriate firing mode.
- Place the nose of the tacker firmly against the workpiece where the fastener is to be driven. Ensure the contact arm is fully depressed.
- Tirà u grillettu per guidà u fermu.
- Rilasciate u grillettu è alzate l'utensile da a pezza di travagliu.
5.3 Luce di travagliu LED
The integrated LED light automatically illuminates the work area when the tool is in operation, providing better visibility in low-light conditions.
5.4 Applicable Materials and Uses
This tacker is suitable for a wide range of materials and applications, including:
- Woodworking (e.g., furniture assembly, decorative trim)
- Construction (e.g., securing plasterboard, insulation, temporary fixtures)
- Prughjetti DIY
- Decorazione interna
- Cardboard pallet reinforcement
Figura 6: Esamples of tacker applications.
6. Mantenimentu
6.1 Clearing Fastener Jams
In the event of a fastener jam, follow these steps:
- Disconnect Power: Always remove the battery before attempting to clear a jam.
- Open the Magazine: Release the magazine as if loading new fasteners.
- Remove Jammed Fastener: Use the provided Allen wrench or pliers to carefully remove any jammed nails or staples from the firing mechanism or magazine. Do not force them out.
- Inspeccione: Check for any damage to the magazine or firing pin.
- Chiudi a rivista: Securely close the magazine.
6.2 Pulizia generale è almacenamentu
- Keep the tool clean and free of dust and debris. Use a dry cloth to wipe down the exterior.
- Store the tool and batteries in a dry, cool place, away from direct sunlight and moisture.
- Eliminate a batteria da l'utensile quandu ùn hè micca in usu per periodi prolungati.
7. Risoluzione di prublemi
This section addresses common issues you might encounter with your KIMO Electric Tacker.
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U strumentu ùn spara micca | Batteria micca installata o scaricata U bracciu di cuntattu ùn hè micca cumpletamente pressu Magazine empty (empty shot prevention) Inceppamentu di fissaggio | Installa / carica a batteria Press tool firmly against workpiece Load fasteners Clear jam (see Section 6.1) |
| Fasteners not driven fully | Nailing depth set too shallow Carica di bateria bassa Incorrect fastener size for material | Adjust depth setting deeper Ricaricate a bateria Use appropriate fastener size |
| I dispositivi di fissaggio si inceppanu spessu | Fasteners dannatu Dimensione di fissazione sbagliata Magazine or firing mechanism dirty | Use new, undamaged fasteners Ensure correct fastener size Clean magazine and firing area |
| U strumentu surriscalda | Usu cuntinuu longu | Allow the tool to cool down. The high-efficiency heat dissipation design helps manage temperature, but breaks are recommended during extended use. |
If you encounter a problem not listed here or if the issue persists after attempting the solutions, please contact KIMO customer support.
8. Specificazioni
| Feature | Detail |
|---|---|
| Marca | KIMO |
| Numero di mudellu | QM-9418 |
| Batteria Voltage | 20V |
| Capacità batterie | 2.0Ah Lithium-ion (x2 included) |
| Finish Nail Length | 20mm - 50mm (700 pcs included) |
| Staple Size | Width 4mm, Length 19mm - 40mm (300 pcs included) |
| Max Firing Speed | 80 nails/minute (continuous mode) |
| Tool Weight (main unit) | 2.8 kg |
| Certificazione | Certificatu PSE |
| UPC | 731029251059 |
9. Garanzia è Support
9.1 Garanzia di u fabricatore
The KIMO Electric Tacker QM-9418 comes with a 1-year manufacturer's warranty. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
If a battery becomes unusable within one year of purchase, contact after-sales service for a replacement.
9.2 Assistenza Clienti
For any questions, technical assistance, or warranty claims, please contact KIMO customer support through the retailer where the product was purchased or visit the official KIMO websitu per l'infurmazioni di cuntattu.
