Introduzione
This manual provides essential instructions for the safe assembly, operation, and maintenance of your INTEX Prism 8,592 Liters Structural Pool. Please read all instructions carefully before setup and use to ensure proper function and safety. Retain this manual for future reference.
Image: The INTEX Prism Structural Pool, showcasing its complete setup including the pool, filter pump, and safety ladder, with individuals enjoying the pool.
Informazioni di sicurezza
ATTENZIONE: A mancata osservazione di sti struzzioni pò causà ferite gravi o morte.
- Surveglianza di l'adultu necessaria: Always provide active adult supervision to children and individuals with disabilities in and around the pool.
- No Diving: This pool is not designed for diving. Shallow water can cause serious injury.
- Spaziu Chjaru: Keep children away from the pool cover to avoid entanglement. Ensure the area around the pool is clear of obstacles.
- Usu chimicu: Handle pool chemicals according to manufacturer instructions. Improper use can cause skin and eye irritation.
- Sicurezza elettrica: Connect the filter pump to a grounded 110v outlet protected by a Ground Fault Circuit Interrupter (GFCI). Do not use extension cords.
- Sicurezza di a scala: Use the ladder only for entering and exiting the pool. Do not allow children to play on the ladder.
Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'assemblea:
- 1 x INTEX Prism Structural Pool Liner (8,592 Liters capacity)
- 1 x INTEX Filter Pump (2,006 Liters/hour, 110v)
- 1 x INTEX Safety Ladder
- Complete Metal Frame Components (legs, horizontal beams, pins)
- Tubi è Clamps for Filter Pump Connection
- Ground Cloth (may be included or recommended separately)
Istruzzioni di stallazione
- Selezzione di u situ: Choose a firm, level surface for pool installation. The area must be free of sharp objects, debris, and have adequate drainage. Ensure the ground can support the weight of the filled pool.
- Piazzamentu di u tettu di terra: Lay the ground cloth (if included) on the selected site. This protects the pool liner from punctures.
- Assemblea di quadru: Following the diagrams provided in the separate assembly guide, connect all metal frame components. Ensure all T-joints, horizontal beams, and vertical legs are securely interlocked with the spring-loaded pins.
- Installazione di liner: Carefully spread the pool liner within the assembled frame. Position the drain plug away from the main traffic area. Smooth out any major wrinkles in the bottom of the liner.
- Cunnessione di a pompa: Connect the filter pump to the designated inlet and outlet ports on the pool liner using the provided hoses and clamps. Assicuratevi chì tutti i cunnessione sianu stretti per impedisce perdite.
- Assemblaggio di scala: Assemble the safety ladder according to its specific instructions. Place the ladder securely against the pool.
- Riempite a piscina: Begin filling the pool with water. As the water level rises, continue to smooth out any remaining wrinkles in the liner from the center outwards. Stop filling when the water reaches the recommended level, typically just below the top frame rail.
Image: The INTEX Prism Structural Pool fully assembled and filled with water in a garden setting, with individuals enjoying the pool.
Image: The INTEX Prism Structural Pool fully assembled and filled with water, situated in a garden environment.
Istruzzioni di funziunamentu
- Initial Pump Operation: Ensure the filter pump is properly connected to the pool and a grounded 110v GFCI outlet. Open all valves to allow water flow. Turn on the pump. It may take a few moments for water to circulate and air to purge from the system.
- Operazione di ogni ghjornu: Run the filter pump for 2-4 hours daily to maintain water circulation and filtration. The exact duration may vary based on pool usage, water clarity, and environmental conditions.
Mantenimentu
- Chimica di l'acqua: Regularly test your pool water's pH and chlorine levels using a pool test kit. Maintain pH between 7.2 and 7.6, and chlorine levels between 1-3 ppm. Adjust as needed with appropriate pool chemicals.
- Pulizia: Skim debris (leaves, insects) from the water surface daily. Vacuum the pool floor as necessary to remove settled dirt and particles.
- Cartuccia di filtru: Turn off and unplug the filter pump before cleaning or replacing the filter cartridge. Clean or replace the filter cartridge every 2 weeks, or more frequently with heavy pool use or if water appears cloudy.
- Invernamentu: For regions with freezing temperatures, consult local guidelines for proper pool winterization procedures to prevent damage to the pool and equipment.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Acqua Nuvulosa | Insufficient filtration, improper chemical balance, heavy use. | Check/clean filter cartridge, adjust water chemicals, run pump for longer periods. |
| Filter Pump Not Working | No power, clogged impeller, airlock in system. | Check power connection and GFCI, clean impeller, bleed air from pump. |
| Fuga d'acqua | Loose hose connections, damaged liner, faulty drain plug. | Stringere tubu clamps, inspect liner for punctures (use repair kit), ensure drain plug is secure. |
Specificazioni
| Feature | Detail |
|---|---|
| Marca | INTEX |
| Nome di mudellu | Prisma |
| Numero di mudellu | 26715 |
| Capacità | 8,592 litri |
| Dimensioni assemblate | 366 cm (Diametru) x 99 cm (Altezza) |
| Materiale di liner | 3-ply PVC-polyester |
| Materiale di quadru | Epoxy-treated Steel |
| Portata di a pompa di filtru | 2,006 Litri/ora |
| Filter Pump Voltage | 110v |
| Culore | Grisgiu |
| Pesu apprussimativu di u pacchettu | 40 kg |
Garanzia è Supportu
For detailed warranty information, product registration, or customer support, please refer to the documentation included with your INTEX Prism Structural Pool. It is recommended to keep your original purchase receipt as proof of purchase for any warranty claims. You may also visit the official INTEX websitu per più assistenza è informazioni di cuntattu.
