Phanteks XT View Mid-Tower Gaming Chassis Instruction Manual

1. Introduzione

The Phanteks XT View is a mid-tower gaming chassis designed to accommodate modern hardware with enhanced cooling capabilities and internal space. It features tempered glass on both the front and side panels, allowing for a clear view of internal components. The chassis supports the latest mainboards with hidden rear connectors for a clean build aesthetic.

Image 1.1: Phanteks XT View Chassis with internal components and D-RGB lighting.

Funzioni chjave:

• Support for rear-side connector mainboards.
• Front and side tempered glass panels.
• Includes three M25-120mm D-RGB fans.
• Supports up to nine 120mm fan positions.
• Dedicated 360mm radiator support in the top panel.
• Accommodates large graphics cards.

2. Cuntenutu di u pacchettu

Verificate chì tutti i cumpunenti sò presenti in u pacchettu:

• XT View Chassis (Black)
• Storage Bracket (1x)
• M25-120_DBK Fan (3x)
• D-RGB Controller (1x)
• Triple SSD Bracket (1x)
• Side D-RGB LED strip (1x)
• Accessory Box containing:
  • Cravatte (30x)
  • MB/SSD Screws (30x)
  • Viti a molla (4x)
  • HDD Screws (8x)
  • Standoff Tool (1x)
  • MB Standoff (1x)
  • PSU Screws (4x)
  • 30mm Fan Screws (12x, UNC6-32)

3. Setup è Installazione

Follow these steps for proper assembly and installation of your PC components within the Phanteks XT View chassis.

3.1. Preparazione di u Chassis

1. Imballà: Eliminate cù cura u chassis da u so imballaggio.
2. Elimina i pannelli: Unscrew and remove the tempered glass side panels and any other removable panels to access the interior.

Imagine 3.1: Internu view of the XT View chassis, ready for component installation.

3.2. Installazione di scheda madre

1. Installa Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, micro-ATX, mini-ITX, E-ATX). Use the included standoff tool if necessary.
2. Piazzà a scheda madre: Carefully align your motherboard with the standoffs and I/O shield opening.
3. Scheda madre sicura: Use the provided MB screws to secure the motherboard to the chassis.

3.3. Installazione di l'alimentatore (PSU)

1. Posizione PSU: Slide the PSU into its designated compartment at the bottom rear of the chassis.
2. Alimentazione sicura: Fasten the PSU to the chassis using the provided PSU screws.

3.4. Installazione di l'unità di almacenamiento

The chassis supports 3.5" HDDs and 2.5" SSDs.

• Discu duru di 3.5" : Install into the storage bracket. The chassis supports 2x 3.5" drives (or 1x if 2x SSDs are installed in the same bracket).
• SSD di 2.5": Install into the storage bracket or the triple SSD bracket. The chassis supports 2x 2.5" drives (or 0x if 2x HDDs are installed in the same bracket).

Secure drives with the appropriate screws.

3.5. Expansion Card (GPU) Installation

1. Eliminate i coperchi di e fessure: Eliminate i coperchi di slot d'espansione necessarii da u fondu di u chassis.
2. Inserisci a carta: Carefully insert your graphics card or other expansion cards into the PCIe slots on the motherboard.
3. Carta sicura: Fasten the expansion card with screws. Vertical GPU support is available with an optional bracket (PH-VGPUKT4.0_03R/PH-PGPUKT_01).

Imagine 3.2: Internu posteriore view highlighting expansion slots and fan mounting points.

3.6. Installazione di u Ventilatore è di u Radiatore

The chassis supports various fan and radiator configurations:

• 120mm Fan Locations: Right Side (2x), Top (3x), Rear (1x), Midplate (3x).
• 140mm Fan Locations: Top (2x), Rear (1x).
• Liquid Cooling Radiator Support:
  • Side: Up to 240mm (with Vertical GPU only).
  • Cima: Finu à 360 mm.
  • Rear: Up to 120mm.

Install the included M25-120 D-RGB fans in your preferred locations. Ensure proper airflow direction for optimal cooling.

3.7. Gestione di cavi

Utilize the cable routing channels and tie-down points behind the motherboard tray to organize cables. This improves airflow and aesthetics.

Image 3.3: Posteriore view illustrating cable management space.

3.8. Front I / O Connections

Connect the front I/O cables from the chassis to the corresponding headers on your motherboard:

• Intestazione USB 3.0
• USB-C 3.2 Gen2 Type-E header
• HD-Audio header
• Power switch, Reset button, D-RGB color button, D-RGB mode button headers
• D-RGB expansion header (for additional D-RGB devices)

4. Operating Instructions

4.1. Power On / Off

Press u Pulsante di putenza located on the top front panel to turn the system on or off.

4.2. Connettività di u pannellu frontale

The front I/O panel provides convenient access to:

• 1x portu USB 3.0
• 1x USB-C 3.2 Gen2 port
• Microphone/Headphone Combo jack

Image 4.1: Front I/O panel on the top of the chassis.

4.3. D-RGB Control

The integrated D-RGB controller allows for customization of the included D-RGB fans and LED strip. Use the D-RGB color button to cycle through colors and the D-RGB mode button to change lighting effects. The D-RGB system can also be synchronized with compatible motherboards via the D-RGB Motherboard connector.

5. Mantenimentu

5.1. Pulizia di i filtri di polvere

Regularly clean the dust filters to maintain optimal airflow and cooling performance. Dust filters are typically located at the front, top, and bottom of the chassis.

1. Elimina i filtri: Gently slide out or unclip the dust filters.
2. Pulita: Use compressed air or a soft brush to remove accumulated dust. For heavily soiled filters, wash with water and allow to dry completely before reinstallation.
3. Reinstallà: Place the clean, dry filters back into their positions.

5.2. Pulizia generale

Per e superfici esterne, aduprate un materiale dolce, damp cloth to wipe down the chassis. Avoid abrasive cleaners or solvents that may damage the finish or tempered glass.

6. Risoluzione di prublemi

Questa sezione tratta di prublemi cumuni chì pudete scuntrà.

6.1. U sistema ùn s'accende micca

• Cunnessioni di Potenza: Verify that the PSU is properly connected to the wall outlet and the power switch on the PSU is in the 'ON' position.
• Motherboard Connections: Ensure all power cables from the PSU are securely connected to the motherboard (24-pin ATX, 8-pin CPU).
• Intestazione di u pannellu frontale: Check that the power button cable from the front I/O is correctly connected to the motherboard's front panel header.

6.2. D-RGB Lighting Not Functioning

• D-RGB Controller Connection: Ensure the D-RGB controller is properly connected to the PSU and the D-RGB devices (fans, LED strip).
• Sincronizazione di a scheda madre: If using motherboard D-RGB control, verify the D-RGB Motherboard cable is correctly connected and the motherboard's software is configured.
• Funzionalità di u buttone: Test the D-RGB color and mode buttons on the front panel.

6.3. Fan Noise or Malfunction

• Cunnessioni: Ensure fan cables are securely connected to the motherboard fan headers or a fan controller.
• Ostaculi: Check for any cables or objects obstructing fan blades.
• Polvere: Clean any dust buildup on fan blades.

7. Specificazioni

8. Supportu è Garanzia

For additional information, technical support, or warranty inquiries, please visit the official Phanteks websitu:

www.phanteks.com

Refer to the Phanteks website for the most current warranty terms and conditions applicable to your region.