HIBREW H10A

HiBREW H10A Programmable Espresso Machine Instruction Manual

Model: H10A | Brand: HIBREW

1. Importanti Instructions Safety

Leghjite attentamente tutte l'istruzzioni prima di utilizà l'apparecchiu è cunservateli per riferimenti futuri. Un usu impropriu pò causà scosse elettriche, incendi o ferite gravi.

2. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli sò presenti è in bonu statu à u mumentu di u disimballaggio:

HiBREW H10A Espresso Machine package contents
Image: All components included in the HiBREW H10A Espresso Machine package.

3. Produttu Finituview

The HiBREW H10A Espresso Machine is designed for home use, offering professional-grade features for brewing espresso and frothing milk.

Cumpunenti chjave:

HiBREW H10A Espresso Machine front view
Image: Front view of the HiBREW H10A Espresso Machine, showcasing its stainless steel design and control panel.
HiBREW H10A Espresso Machine with pressure gauge
Image: Close-up of the built-in pressure gauge on the HiBREW H10A, indicating ideal pressure for espresso extraction.
HiBREW H10A Espresso Machine with steam wand
Image: The powerful steam wand of the HiBREW H10A in action, creating microfoam for latte art.

4. Setup

  1. Disimballaggio e pulizia iniziale:
    • Eliminate tutti i materiali di imballaggio è stickers.
    • Wash the water tank, portafilter, filter baskets, milk pitcher, and drip tray with warm soapy water. Rinse thoroughly and dry.
    • Asciugà l'esterno di a macchina cun un soffiu, damp tela.
  2. Installazione di cisterna d'acqua:
    • Ensure the rubber plug is removed from the bottom of the water tank before first use.
    • Fill the 1.8L removable water tank with fresh, cold water. Do not exceed the MAX fill line.
    • Place the water tank securely back into its position at the rear of the machine.
  3. First Use / Priming the Machine:
    • Cunnette a macchina à una presa di corrente cun messa à terra.
    • Press the power button to turn on the machine. The indicator lights will blink as the machine heats up.
    • Once the lights stop blinking, the machine is ready.
    • Place a large cup under the brew head. Press the single shot button to run water through the system without coffee. This primes the pump and cleans the internal components. Repeat this process for the steam wand by turning the steam knob to release steam for a few seconds.
HiBREW H10A Espresso Machine with water tank removed
Image: The HiBREW H10A Espresso Machine with its removable 1.8L water tank detached for filling or cleaning.

5. Operating Instructions

5.1 Preparazione di Espresso

  1. Preparate u Portafiltru:
    • Select the desired filter basket (single or double shot) and place it into the 58mm portafilter.
    • Add fresh, finely ground coffee to the filter basket. For optimal results, use a coffee grinder to grind beans just before brewing.
    • Livellate i fondi di caffè èamp fermamente cù a tamper. Ensure the coffee bed is even and compact.
  2. Inserite u Portafiltru:
    • Allineate u portafiltru cù a testa di infusione è giratelu fermamente à diritta finu à ch'ellu sia bluccatu bè in u so postu.
  3. Piazzate e tazze:
    • Place one or two pre-warmed espresso cups under the portafilter spouts.
  4. Brew Espresso:
    • Press the single shot or double shot button on the control panel. The machine will begin pre-infusion, then extract the espresso.
    • The LCD display will show the extraction time. The machine will automatically stop when the programmed volume is reached.
HiBREW H10A Espresso Machine brewing process
Image: A step-by-step visual guide to brewing espresso with the HiBREW H10A, from filling the tank to enjoying the espresso.

5.2 Latte fumante

  1. Prepare the Steam Wand:
    • Riempite a brocca di latte cù latte fretu (di latte o senza latte).
    • Pusiziunate a lancia di vapore sopra u vassoio di gocciolamentu è aprite brevemente a manopola di vapore per spurgà l'acqua condensata. Chiudete a manopola.
  2. Heat and Froth Milk:
    • Press the steam button on the control panel. The machine will heat up to steam temperature.
    • Once the steam indicator light is solid, immerse the steam wand tip just below the surface of the milk.
    • Open the steam knob fully. Angle the pitcher to create a vortex in the milk.
    • Lower the pitcher slightly to introduce air for frothing, then raise it to submerge the tip for heating.
    • Continue until the desired temperature and texture are achieved (pitcher will be hot to touch).
  3. Finisce a cottura à vapore:
    • Close the steam knob and remove the milk pitcher.
    • Asciugate subitu a lancia di vapore cù l'adamp pannu per impedisce chì i residui di latte si asciughinu.
    • Briefly open the steam knob again to purge any remaining milk from the wand.
HiBREW H10A Espresso Machine steaming milk
Image: The steam wand of the HiBREW H10A in action, creating microfoam for latte art.

5.3 Funzioni programmabili

The HiBREW H10A allows customization of several brewing parameters:

HiBREW H10A Espresso Machine programmable functions
Image: Visual representation of the programmable functions on the HiBREW H10A, including temperature, cup volume, and pre-infusion time settings.

6. Mantenimentu

6.1 Pulizia

6.2 Decalcificazione

Descaling is essential to remove mineral buildup and maintain optimal machine performance. The frequency depends on water hardness and usage.

7. Risoluzione di prublemi

PrublemuCausa PossibileSoluzione
Nisuna distribuzione di caffèReservoir d'acqua viotu; filtru intasatu; macchina micca innescata.Fill water tank; clean filter; prime the machine.
L'espresso hè troppu debule / acquosuCoffee too coarse; insufficient coffee; tamptroppu chjaru.Aduprate una macinazione più fina; aumentate a quantità di caffè; tamp più fermu.
Espresso extracts too slowly/not at allCaffè troppu finu; troppu caffè; tamptroppu duru.Aduprate una macinazione più grossa; riduce a quantità di caffè; tamp più liggeru.
Nisun vapore da a bacchettaLancia di vapore intasata; a macchina ùn hè micca à a temperatura di u vapore.Pulite a lancia di vapore; aspettate chì a luce indicatrice di vapore sia fissa.

8. Specificazioni

9. Garanzia è Support

The HiBREW H10A Programmable Espresso Machine comes with a full 1-year US warranty. For technical support, troubleshooting assistance, or warranty claims, please contact HiBREW customer service through their official websitu o u rivenditore induve u pruduttu hè statu acquistatu.

10. Video di u produttu

MHW-3BOMBER Coffee Scale Instruction

Video: An instructional video demonstrating the use of the MHW-3BOMBER Coffee Scale, which can be used to precisely measure coffee grounds for the HiBREW H10A.

Discovery of CASABREWS ULTRA Espresso Machine

Video: Un dettagliuview of the CASABREWS ULTRA Espresso Machine, highlighting features and operation similar to the HiBREW H10A.