1. Importanti Instructions Safety
Please read these instructions carefully before installation and use. Keep this manual for future reference.
- Sicurezza elettrica: Always disconnect power at the main circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring procedures.
- Installazione: Ensure the mounting surface can support the weight of the fixture. Do not install near heat sources or in excessively damp environments unless specified.
- Trattamentu: Handle the fixture with care to avoid damage. Do not touch the LED light source directly when the fixture is in operation or immediately after, as it may be hot.
- Pulizia: Aduprate un pannu suave è seccu per a pulizia. Ùn aduprate micca detergenti abrasivi o solventi.
2. Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti prima di principià l'installazione.
- SLV Cyft LED Ceiling Light Fixture
- Ferramenta di muntatura (viti, tasselli)
- Manuale d'istruzzioni
3. Setup è Installazione
This section outlines the steps for installing your SLV Cyft LED Ceiling Light. Professional installation is recommended.
3.1 Pre-Installazione
- Spegne l'alimentazione: Locate the main circuit breaker and turn off the power supply to the installation area. Verify power is off using a voltagè testatore.
- Imballà: Eliminate cù cura l'apparecchiatura è tutti i cumpunenti da l'imballu. Verificate s'ellu ci sò danni.
3.2 Muntà di l'attrezzatura
- Attaccà a staffa di muntatura: Fissate a staffa di muntatura à a scatula di cunnessione di u tettu cù e viti furnite. Assicuratevi ch'ella sia fissata fermamente.
- cablaggio: Connect the electrical wires from the ceiling to the fixture's wires according to local electrical codes. Typically, connect live (black/brown) to live, neutral (white/blue) to neutral, and ground (green/yellow) to ground. Use appropriate wire connectors.
- Fixture sicura: Carefully align the fixture with the mounting bracket and secure it using the provided screws or locking mechanism. Ensure no wires are pinched.
Image 1: SLV Cyft LED Ceiling Light, Model 1007608, mounted on a ceiling. This image illustrates the product's appearance and how it integrates into a room.
4. Operating Instructions
Once installed, operating the SLV Cyft LED Ceiling Light is straightforward.
- Ripristina l'energia: Return to the main circuit breaker and turn the power supply back on.
- Accende: Use the wall switch connected to the fixture to turn the light on.
- Ajustabilità: If your model features adjustable light output or direction, refer to any specific controls on the fixture or associated wall switch for adjustment. (Note: The product description mentions "Couleur: Réglable" which may imply adjustable light color or brightness, or physical adjustability of the fixture itself. Consult product packaging for specific features.)
5. Mantenimentu
Una manutenzione regulare assicura a longevità è e prestazioni ottimali di u vostru apparecchiu di illuminazione.
- Pulizia: Ensure the power is off before cleaning. Wipe the fixture with a soft, dry, lint-free cloth. Do not use harsh chemicals, abrasive cleaners, or polishes as they may damage the finish.
- Fonte di luci LED: The LED light source in this fixture is designed for long life and is generally not user-replaceable. Do not attempt to disassemble the LED module.
- Ispezione: Verificate periodicamente s'ellu ci sò cunnessione allentate o segni di usura. Sè truvate qualchì prublema, scollegate l'alimentazione è cunsultate un elettricista qualificatu.
6. Risoluzione di prublemi
If you encounter issues with your SLV Cyft LED Ceiling Light, refer to the following common problems and solutions.
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| A luce ùn accende micca. | Nisuna alimentazione elettrica; cablaggi allentati; interruttore difettuosu. | Verificate l'interruttore automaticu. Verificate i cunnessione di i fili. Pruvate l'interruttore murale. |
| Luce lampeggia. | Cunnessione di cablaggio libera; interruttore dimmer incompatibile (se applicabile). | Ensure all wiring connections are secure. If using a dimmer, ensure it is LED-compatible. |
| A luce hè dim. | Dimmer setting too low; dust accumulation. | Adjust dimmer to a higher setting. Clean the fixture. |
If the problem persists after attempting these solutions, contact a qualified electrician or SLV customer support.
7. Specificazioni
| Marca | SLV |
| Numero di mudellu | 1007608 |
| Dimensioni (L x W x H) | 13.2 x 7.9 x 13.2 cm |
| Pesu | 946 grammi |
| Materiale | Metallu |
| Stile | Moderna |
| Culore | Adjustable (Refers to fixture's aesthetic or light output characteristics) |
| Tipu di fonte di luce | LED |
| Fonte d'energia | Corded Electric |
| Tipu di stallazione | Muntu di u tettu |
| Usi specifichi | A casa |
| Usu Indoor / Outdoor | Outdoor (Note: Product categories suggest interior, but spec says 'Extérieure'. I will include both and add a note for clarification.) |
Note: While some specifications indicate 'Outdoor Use', the product categories suggest 'Interior Lighting'. Please refer to product packaging or manufacturer's official documentation for definitive usage environment.
8. Garanzia è Support
Specific warranty information is not provided in the product details. For warranty claims or technical support, please contact SLV directly or refer to the warranty card included with your purchase.
Di solitu pudete truvà l'infurmazioni di cuntattu nantu à u situ ufficiale di u fabricatore. websitu: www.slv.com
