Natec FURY SHOBO SH4F RGB MIDI TOWER PC Case User Manual

1. Introduzione

Welcome to the user manual for your Natec FURY SHOBO SH4F RGB MIDI TOWER PC Case. This guide provides essential information for the proper assembly, installation, operation, and maintenance of your new computer chassis. Please read this manual thoroughly before beginning installation to ensure optimal performance and longevity of your components.

2. Guidelines di sicurezza

• Always disconnect the power supply from the wall outlet before installing or removing any components inside the PC case.
• Handle components with care to avoid damage from electrostatic discharge (ESD). Consider using an anti-static wrist strap.
• Tenite e piccule parte, cum'è e viti, luntanu da i zitelli.
• Assicuratevi una ventilazione adatta intornu à u chassis di u PC per impedisce u surriscaldamentu.
• Do not expose the case to extreme temperatures, humidity, or direct sunlight.
• Avoid placing heavy objects on top of the case.

3. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli sò presenti in u vostru pacchettu:

• Natec FURY SHOBO SH4F RGB MIDI TOWER PC Case
• Accessory box (containing screws, cable ties, and other small parts)
• Manuale d'uso (stu documentu)

4. Produttu Finituview

The Natec FURY SHOBO SH4F is a MIDI TOWER PC case designed for gaming and general-purpose computing, offering ample space for components and efficient cooling. It features a modern design with RGB lighting.

Figura 4.1: Un angulatu view of the Natec FURY SHOBO SH4F RGB MIDI TOWER PC Case, showcasing its black metal and tempered glass construction. The front panel features a mesh design with three illuminated RGB fans, and a single RGB fan is visible at the rear exhaust. The top panel includes I/O ports and a mesh filter.

4.1 Pannellu I/O frontale

• Pulsante di putenza
• Reset Button
• Portu USB 2.0 (x1)
• Prese audio (cuffie/microfonu)
• RGB Control Button (if applicable)

4.2 Disposizione interna

The case supports Micro ATX and Mini ATX motherboards and features a bottom-mounted power supply bay. It includes dedicated areas for storage drives and efficient cable management.

5. Cunfigurazione è installazione di cumpunenti

Follow these steps to install your PC components into the FURY SHOBO SH4F case.

5.1 Preparazione di u Casu

1. Pone a custodia nantu à una superficia piana è stabile.
2. Remove the side panels. Typically, the tempered glass side panel is secured with thumbscrews.

5.2 Installazione di a Scheda Madre

1. Install the I/O shield (if not pre-installed on your motherboard) into the rear opening of the case.
2. Ensure the motherboard standoffs are correctly aligned for your Micro ATX or Mini ATX motherboard. Adjust or install additional standoffs if necessary.
3. Carefully place the motherboard onto the standoffs, aligning the screw holes.
4. Fissate a scheda madre cù e viti furnite. Ùn stringhjite micca troppu.

5.3 Installazione di l'alimentazione elettrica

1. Locate the power supply bay at the bottom rear of the case.
2. Slide your power supply unit (PSU) into the bay from the rear of the case, ensuring the fan faces downwards (if the case has a bottom vent) or upwards.
3. Assicurate l'alimentatore cù viti da u fondu di u chassis.

5.4 Installazione di l'unità di almacenamiento

Refer to your case's specific drive bay design for 2.5" SSDs and 3.5" HDDs. Typically, these involve trays or direct screw mounting.

5.5 Expansion Card Installation (e.g., Graphics Card)

1. Eliminate i coperchi di slot PCI-E necessarii da u fondu di u chassis.
2. Insert your expansion card into the corresponding PCI-E slot on the motherboard.
3. Secure the card with a screw or the case's retention mechanism.

5.6 Gestione di Cable

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and aesthetics.

5.7 Connecting RGB Fans

The pre-installed RGB fans typically connect to a central RGB controller or directly to your motherboard's RGB headers. Consult your motherboard manual for specific RGB header locations and software control. Ensure all fan power cables are connected to appropriate fan headers on the motherboard or a fan hub.

6. Funziunamentu di u vostru chassis di PC

6.1 Accensione / spegnimentu

After all components are installed and cables connected, plug your power supply into a wall outlet. Press the power button on the front I/O panel to turn on your system. To turn off, use the operating system's shutdown function or press and hold the power button for several seconds.

6.2 Cuntrollu di l'illuminazione RGB

If your case features an RGB control button on the front I/O panel, press it to cycle through various lighting modes and colors. For advanced customization, use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) if the fans are connected to compatible headers.

7. Mantenimentu

Una manutenzione regulare aiuta à assicurà prestazioni ottimali è allunga a durata di vita di i cumpunenti di u vostru PC.

7.1 Pulizia di u filtru di a polvere

The FURY SHOBO SH4F case includes dust filters (e.g., on the top and bottom). Periodically remove and clean these filters by rinsing them with water and allowing them to dry completely before re-installing. This prevents dust buildup and maintains airflow.

7.2 Pulizia esterna

Asciugate l'esternu di a carcassa cù un pannu dolce èamp pannu. Evitate detergenti abrasivi o solventi chì puderanu dannighjà a finitura o u vetru temperatu.

8. Risoluzione di prublemi

Sè avete prublemi, riferitevi à i seguenti passi cumuni di risoluzione di i prublemi:

• Nisun putere: Ensure the power supply is properly connected to the wall outlet and the motherboard. Check all internal power cables (24-pin ATX, 8-pin CPU, GPU power). Verify the power button cable is correctly connected to the motherboard's front panel header.
• I ventilatori ùn giranu micca: Check if fan power cables are securely connected to the motherboard or fan hub. Ensure the power supply is functioning.
• L'illuminazione RGB ùn funziona micca: Verify RGB cables are correctly connected to the RGB controller or motherboard header. If using a button, try cycling through modes. If using software, ensure it's installed and configured correctly.
• Surriscaldamentu: Ensure all fans are spinning correctly and oriented for proper airflow (intake/exhaust). Clean dust filters and internal components. Verify CPU cooler and GPU cooler are properly installed.

9. Specificazioni

10. Garanzia è Support

Natec products are manufactured to high-quality standards. For information regarding warranty terms and conditions, please refer to the warranty card included with your product or visit the official Natec website. If you encounter any issues not covered in this manual or require further assistance, please contact Natec customer support through their official channels.

Produttore: Natec