Baseus Jump Starter and Power Bank User Manual

1. Introduzione

Thank you for choosing the Baseus Jump Starter and Power Bank. This compact and powerful device is designed to provide reliable emergency jump-starting for your vehicle and serve as a portable power bank for your electronic devices. With its high capacity and robust safety features, it ensures you are prepared for unexpected situations on the road.

Leghjite attentamente stu manuale prima di utilizà u pruduttu per assicurà un funziunamentu sicuru è ottimale. Cunservate stu manuale per riferimenti futuri.

2. Produttu Finituview è Features

The Baseus Jump Starter and Power Bank (Model: BS-CH001) is a versatile 2-in-1 device featuring a 10,000mAh battery capacity, capable of delivering a peak current of 1000A for jump-starting vehicles. It also functions as a power bank with USB-A and Type-C outputs.

Figure 2.1: Baseus Jump Starter and Power Bank with Smart Ignition Clamp and USB-C cable.

Funzioni chjave:

• High Performance: 10,000mAh / 3.7V / 37Wh capacity with 1000A peak current and 500A inrush current.
• Multifunzionale: Serves as both a car jump starter and a portable power bank.
• Longa durata: Can jump-start a car up to 50 times on a single full charge. Maintains up to 85% of stored energy one year after last full charge when not in use.
• Display Digitale: Built-in display shows the battery charge level.
• Resistente à a temperatura: High-performance polymer battery cells are resistant to very low (-20°C) and high temperatures (60°C).
• Power Bank Outputs: USB output (5V/2.4A Max) and Type-C output (5V/2.4A Max) for charging mobile devices.
• Sicurezza avanzata: Equipped with 9 levels of protection, including overcharge, voltage stabilization, short circuit, over-discharge, reverse connection, overheating, and overcurrent protection.
• Portable: Compact size and technical parameters allow it to be carried on a plane (37Wh rated power conforms to civil aviation standards).
• LED integratu: Can be used as a flashlight.

3. Ciò chì hè in a scatula

Quandu avete apertu u pacchettu, assicuratevi chì tutti l'articuli seguenti sianu presenti è in bonu statu:

• 1 x Baseus Jump Starter and Power Bank (Model: BS-CH001)
• 1 x Cavo di ricarica Type-C
• 1 x Smart Ignition Clamp (Crocodile Cables)

Figure 3.1: Product packaging showing the device and accessories.

4. Setup è Charging

Carica iniziale:

Before first use, it is recommended to fully charge the Baseus Jump Starter. Connect the provided Type-C cable to the input port of the jump starter and the other end to a USB power adapter (not included, 5V/2.4A recommended). The digital display will indicate the charging progress.

A full charge typically takes several hours. Ensure the device is fully charged for optimal jump-starting performance.

Figure 4.1: USB and Type-C ports for charging the device and external devices.

5. Operating Instructions

5.1. Jump-Starting a Vehicle

Follow these steps carefully to safely jump-start your vehicle:

1. Step 1: Connect the Smart Ignition Clamps.

   Insert the smart ignition clamp's EC5 connector into the EC5 interface of the jump starter. The connection status will be indicated by flashing red and green lights on the clamp.

2. Step 2: Attach to Car Battery.

   Open the hood of your car. Connect the red (+) clamp à u terminale pusitivu di a batteria di a vostra vittura è u neru (-) clamp to the negative terminal of your car battery. Ensure a secure connection.
3. Step 3: Start the Car.

   Return to the vehicle and start the engine. Once the car starts, immediately remove the jump starter from the battery terminals. First, disconnect the black (-) clamp, tandu u cl rossu (+)amp, and finally unplug the smart ignition clamp da u starter di salto.

Figure 5.1: Visual guide for the 3-step jump-starting process.

Important: Do not crank the engine for more than 3 seconds. If the car does not start, wait at least 30 seconds before attempting again. Do not attempt more than 3 consecutive starts without allowing the device to cool down.

5.2. Usu cum'è una batteria esterna

To charge your mobile devices, simply connect your device's charging cable to the USB-A or Type-C output port of the Baseus Jump Starter. The device will automatically begin charging your connected device.

Figure 5.2: The device can be used as a power bank to charge various electronic devices.

5.3. Usendu a torcia LED

The built-in LED can be used as a flashlight. Refer to the device's physical buttons for activation. Typically, a long press on the power button activates the flashlight, and subsequent presses may cycle through different modes (e.g., steady, strobe, SOS) or turn it off.

6. Informazioni è precauzioni di sicurezza

Your safety is paramount. Please adhere to all safety guidelines to prevent injury or damage to the device and vehicle.

Reguli di sicurezza generale:

• Always ensure the jump starter is fully charged before attempting to jump-start a vehicle.
• Do not use the device if the battery clampi cavi sò danneggiati.
• Ùn pruvate micca di accende una batteria congelata.
• Assicuratevi a polarità curretta quandu cunnette u clamps (red to positive, black to negative). Reverse connection protection is built-in, but always double-check.
• Mantene u dispusitivu luntanu da i zitelli.
• Ùn espone micca u dispusitivu à a pioggia o à l'umidità estrema.
• Do not disassemble, modify, or attempt to repair the device yourself. Contact qualified service personnel.
• Mantene u dispusitivu in un locu frescu è seccu quandu ùn hè micca in usu.

Prutezzioni di sicurezza integrate:

The Baseus Jump Starter is equipped with 9 levels of protection for stable and trouble-free operation:

1. Top-quality lithium-polymer batteries
2. Prutezzione di overcharge
3. Voltage stabilizazione
4. Prutezzione contr'à scossa elettrica
5. Prutezzione di cortu circuitu
6. Prutezzione over-discharge
7. Prutezzione contr'à a cunnessione inversa
8. Prutezzione di surriscaldamentu
9. Prutezzione di overcurrent

Figure 6.1: Smart Ignition Clamps designed for safe operation with multiple built-in protections.

7. Specificazioni

8. Mantenimentu

Proper maintenance ensures the longevity and optimal performance of your Baseus Jump Starter and Power Bank:

• Conservazione: Conservate l'apparecchiu in un locu frescu è asciuttu, luntanu da a luce diretta di u sole è da temperature estreme.
• Carica: For optimal battery health, charge the device every 3-6 months, even if not in use, to maintain its charge level.
• Pulizia: Aduprate un pannu dolce è asciuttu per pulisce l'esternu di u dispusitivu. Ùn aduprate micca prudutti chimichi aggressivi o detergenti abrasivi.
• Cura di u cable: Inspect the smart ignition clamps and charging cable regularly for any signs of wear or damage. Replace if necessary.

9. Risoluzione di prublemi

If you encounter issues with your Baseus Jump Starter, refer to the following common troubleshooting steps:

10. Garanzia è Support

Baseus products are manufactured to the highest quality standards. This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including warranty period and coverage.

For technical support, troubleshooting assistance, or warranty claims, please contact Baseus customer service through their official website or the retailer from whom you purchased the product. Please have your product model number (BS-CH001 / Jump10K-Compact) and proof of purchase ready when contacting support.

Nota: U smontaggio o a mudificazione micca autorizata di u pruduttu annullerà a garanzia.