HENDI Blender User Manual

1. Produttu Finituview

The HENDI Blender is a versatile kitchen appliance designed for efficient blending of fruits and vegetables, preparing cocktails, smoothies, and even crushing ice. It features a robust design with advanced safety mechanisms and intuitive controls.

Figure 1: HENDI Blender - Main Unit

This image shows the HENDI Blender from the front, highlighting its sleek black base with an electronic touch panel and the clear 2.5-liter pitcher with its lid and tamper in locu.

Funzioni chjave:

• Blending putente: Suitable for a wide range of ingredients, including ice.
• Large Capacity Pitcher: Comes with a durable, transparent 2.5-liter polycarbonate pitcher.
• Tamper Inclusu: A polypropylene tamper is provided for processing denser or larger ingredients.
• Custruzzione durabile: Features an ABS housing, polycarbonate lid, and a removable AISI 420 stainless steel blade with titanium coating.
• Resistenza à a temperatura: Designed to withstand temperatures from -40°C to 90°C.
• Funzioni di sicurezza: Equipped with overheating and electrical overload protection, and a safety locking system to prevent accidental operation without the pitcher.
• Pannellu di cuntrollu elettronicu: Easy-to-use touch panel with 3 speed levels (8,350 to 24,800 rpm) and 3 timer settings (30, 45, 90 seconds).

2. Importanti Instructions Safety

Leghjite attentamente tutte l'istruzzioni di sicurezza prima di utilizà l'apparecchiu. A mancanza di seguitu di queste istruzzioni pò causà scosse elettriche, incendi o ferite gravi.

• Sicurezza elettrica:
  • Assicuratevi chì u voltagVerificate chì a tensione indicata nantu à l'apparecchiu currisponde à a vostra rete elettrica lucale prima di cunnettelu.
  • Ùn immerse micca a basa di u mutore in acqua o qualsiasi altru liquidu.
  • Always unplug the blender from the power outlet before cleaning, assembling, or disassembling parts.
  • Ùn operate micca u blender cù un cordone o plug dannatu.
• Sicurezza di lama:
  • The blades are extremely sharp. Handle with extreme care during assembly, disassembly, and cleaning.
  • Never touch the blades while the appliance is plugged in or operating.
• Sicurezza di u funziunamentu:
  • Always ensure the pitcher is securely locked onto the motor base before starting the blender. The safety locking system prevents operation if not properly installed.
  • Do not overfill the pitcher. Refer to the MAX fill line.
  • Do not operate the blender continuously for extended periods to prevent motor overheating. The appliance has built-in overheating protection.
  • Aduprà u tamper only when the lid is securely in place and the blender is running. Do not use other utensils.
  • Keep hands and utensils out of the pitcher while blending.
• Considerazioni di temperatura:
  • The pitcher is resistant to temperatures from -40°C to 90°C. Avoid blending extremely hot liquids above 90°C.

3. Cumpunenti di u produttu

Familiarize yourself with the main parts of your HENDI Blender:

1. Base di u Motore: Contains the motor, electronic controls, and safety locking mechanism.
2. Brocca di 2.5 litri: Transparent polycarbonate container with integrated blades.
3. Coperchio: Secures the pitcher during operation, with an opening for the tamper.
4. Tamper: Used to push ingredients towards the blades during blending.
5. Assemblage de lame : Removable AISI 420 stainless steel blades with titanium coating.

Figura 2: Exploded View of Blender Components

This image illustrates the main components of the HENDI Blender: the motor base, the 2.5-liter pitcher with its integrated blade assembly, the lid, and the tamper.

4. Setup

Segui sti passi per preparà u vostru frullatore per u primu usu:

1. Imballà: Eliminate cù cura tutti i cumpunenti da l'imballu. Cunservate l'imballu per un almacenamentu o trasportu futuru.
2. Pulita: Prima di u primu usu, lavate a brocca, u coperchio è uamper with warm soapy water. Rinse thoroughly and dry. Wipe the motor base with a damp tela.
3. Placement: Place the motor base on a stable, flat, and dry surface. Ensure there is adequate ventilation around the unit.
4. Assemblà a brocca: Ensure the blade assembly is securely attached to the bottom of the pitcher.
5. Attach Pitcher to Base: Place the pitcher onto the motor base. Rotate it slightly until it clicks into place, engaging the safety locking system. The blender will not operate if the pitcher is not correctly seated.
6. Connect Power: Inserite u cavu di alimentazione in una presa elettrica adatta (230 V).

5. Operating Instructions

Your HENDI Blender features an electronic touch panel for easy operation.

Figure 3: Blender Ready for Operation with Ingredients

This image shows the HENDI Blender with fresh berries inside the pitcher, demonstrating its readiness for blending various ingredients.

1. Aggiungi Ingredienti: Place your desired ingredients into the pitcher. Do not exceed the maximum fill line. For best results, add liquids first, then soft ingredients, and finally harder ingredients or ice.
2. Tappa sicura: Place the lid firmly onto the pitcher. Ensure the small cap is also in place or removed if using the tamper.
3. Sceglite a velocità: Use the electronic touch panel to select one of the three speed levels:
   • Bassu: Approximately 8,350 rpm
   • Medium: Approximately 13,500 rpm
   • Altu: Approximately 24,800 rpm
4. Set Timer (Opzionale): Choose one of the preset timer settings: 30, 45, or 90 seconds. The blender will automatically stop after the selected time.
5. Principià a mistura: Press the start button on the touch panel.
6. Utilizendu u Tamper: If ingredients are not circulating, remove the small cap from the lid and use the tamper per spinghje l'ingredienti versu e lame. Never use fingers or other utensils.
7. Funzione Pulse: For short bursts of power or to chop ingredients, use the pulse function. This provides maximum speed as long as the button is pressed.
8. Fermate a miscelazione: Press the stop button or wait for the timer to complete.
9. Remove Pitcher: Once blending is complete, unplug the blender and carefully remove the pitcher from the base.

6. Mantenimentu è Pulizia

Una pulizia regulare assicura prestazioni ottimali è allunga a vita di u vostru frullatore.

1. Scollega: Scollega sempre u blender da a presa di corrente prima di pulisce.
2. Smontare: Remove the pitcher, lid, and tamper from the motor base.
3. Clean Pitcher and Blades:
   • For easy cleaning, fill the pitcher halfway with warm water and a drop of dish soap. Secure the lid and run the blender on low speed for 30 seconds. Rinse thoroughly.
   • For more thorough cleaning, carefully remove the blade assembly from the pitcher (if detachable). Wash the pitcher, lid, tamper, and blade assembly with warm soapy water. Use a brush for the blades, exercising extreme caution due to their sharpness.
   • All removable parts are dishwasher safe (top rack recommended) or can be hand-washed.
4. Pulite a basa di u mutore: Asciugate a basa di u mutore cun un soffiu, damp pannu. Ùn immergete micca a basa di u mutore in acqua è ùn a spruzzate micca cù acqua.
5. Asciuttu: Assicuratevi chì tutte e parte sianu cumpletamente asciutte prima di riassemblà o di almacenà u frullatore.
6. Conservazione: Store the blender in a clean, dry place, away from direct sunlight and heat.

7. Risoluzione di prublemi

If you encounter issues with your HENDI Blender, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact HENDI customer support.

8. Specificazioni

9. Garanzia è Support

HENDI products are manufactured to high-quality standards. For information regarding warranty coverage, please refer to the warranty card included with your product or visit the official HENDI websitu.

Politica di ritornu: This product is eligible for returns within 30 days of receipt, as per Amazon's return policy.

Assistenza Clienti: For technical assistance, spare parts, or service inquiries, please contact HENDI customer support through their official channels. Information regarding spare parts availability is currently unavailable through general product listings.

You can often find contact details on the manufacturer's websitu o in l'imballu di u pruduttu.