XINLEI Universal Pedestal TV Stand

1. Introduzione

This instruction manual provides detailed guidance for the assembly, operation, and maintenance of your XINLEI Universal Pedestal TV Stand, Model TS004H. This stand is designed to securely hold televisions ranging from 32 to 75 inches, with a maximum weight capacity of 132 lbs (60 kg) and VESA compatibility from 100x100mm to 600x400mm. Please read this manual thoroughly before installation to ensure safe and correct usage.

2. Informazioni di sicurezza

• Capacità di pesu: Do not exceed the maximum weight capacity of 132 lbs (60 kg). Overloading can result in instability and potential injury.
• Dimensione TV: This stand is suitable for TVs between 32 and 75 inches. Ensure your TV's VESA pattern is within the supported range (100x100mm to 600x400mm).
• Stabilità: Always place the TV stand on a flat, stable, and level surface. Avoid placing it on uneven ground or near edges where it could be easily tipped.
• I zitelli è l'animali: Keep children and pets away from the TV stand during assembly and ensure the TV is securely mounted to prevent accidental tipping.
• Cuntrolli regulari: Verificate periodicamente tutte e viti è e cunnessione per assicurassi ch'elle restinu strette è sicure.
• Dannu: If any part of the stand is damaged or missing, do not proceed with assembly. Contact customer support for assistance.

3. Cuntenutu di u pacchettu

Before beginning assembly, verify that all components are present and undamaged. Refer to the included hardware list in your package for specific part identification. Typical components include:

• Base Plate (Tempered Glass)
• Pilastru di Supportu
• Staffe di Montaggio TV
• VESA Adapters (if applicable)
• Hardware Kit (screws, washers, spacers, nuts, Allen keys)
• Clips di Gestione di Cavi
• Cuscinetti antiscivoli

4. Setup è Assemblea

Assembly typically takes approximately 15 minutes. Follow the numbered steps provided in your physical instruction manual. The following images illustrate key aspects of the assembly process and product features.

Figure 4.1: Product Dimensions and Compatibility. This diagram illustrates the overall dimensions of the stand, its VESA compatibility (Min 100x100mm, Max 600x400mm), and maximum supported TV weight (132 lbs) for TVs between 32 and 75 inches.

Figure 4.2: Compatibility Check. Before assembly, confirm your TV's size (32-75 inches), VESA pattern (Max 600x400mm, Min 100x100mm), and weight (Max 110lbs, note: product specs state 132lbs, refer to product specifications for accurate weight limit).

Figure 4.3: Stable and Durable Base. The stand features a large, solid tempered glass base and a sturdy steel pillar for enhanced stability.

1. Attaccate i cuscinetti antiscivolo: Apply the provided non-slip pads to the bottom of the tempered glass base to prevent scratching surfaces and enhance stability.
2. Assemble Pillar to Base: Securely attach the main support pillar to the tempered glass base using the designated screws and tools.
3. Attaccà i supporti TV à u televisore: Mount the TV mounting brackets to the back of your television using the appropriate VESA screws, washers, and spacers from the hardware kit. Ensure the brackets are centered and securely fastened.
4. Mount TV to Pillar: Carefully lift your TV and hook the mounted brackets onto the support pillar. Ensure the TV is level and securely seated.
5. Secure TV with Safety Screws: Insert and tighten the safety screws at the bottom of the TV brackets to prevent accidental dislodging of the TV from the stand.

5. Operating Instructions

Figure 5.1: Height Adjustment. The stand offers 5 levels of height adjustment, ranging from 36.3 to 44.1 inches (measured from the floor to the center of the bracket).

Figure 5.2: Cable Management and Safety Features. This image highlights the cable clips for organization, the safety screw mechanism, and the non-slip pads on the base.

• Ajustamentu di l'altezza: The stand offers 5 mounting height options, allowing you to adjust the TV height from 36.3 to 44.1 inches (from the floor to the bracket center). To adjust, carefully remove the TV, reposition the mounting brackets on the pillar to the desired height, and re-secure the TV.
• Gestione di Cable: Utilize the integrated cable clips on the support pillar to route and organize your TV and device cables, maintaining a tidy appearance.
• Placement: The compact design allows for versatile placement, either as a standalone unit or positioned behind a TV cabinet, optimizing space in various room sizes.

6. Mantenimentu

• Pulizia: Use a soft, dry cloth to clean the stand. For the tempered glass base, a glass cleaner can be used. Avoid abrasive cleaners or solvents that may damage the finish.
• Verificazione di hardware: Verificate periodicamente tutte e viti è e cunnessione per assicurassi ch'elle sianu strette. Stringhjitele di novu se necessariu per mantene a stabilità.
• Trasferimentu: When moving the TV stand, always lift it carefully. Avoid dragging the stand, especially with a TV mounted, to prevent damage to the stand or flooring.

7. Risoluzione di prublemi

• A pusizione hè instabile:
  • Ensure the stand is placed on a flat, level surface.
  • Verify all assembly screws are securely tightened.
  • Confirm the TV weight does not exceed 132 lbs (60 kg).
• TV Does Not Fit Brackets:
  • Check your TV's VESA mounting pattern against the stand's compatibility (100x100mm to 600x400mm).
  • Ensure you are using the correct screws, washers, and spacers for your TV model.
• Parti mancanti o danneggiate:
  • Review the package contents list. If parts are missing or damaged, contact XINLEI customer service for replacements.

8. Specificazioni

9. Garanzia è Support

XINLEI is committed to providing quality products. If you encounter any issues with your TV stand, including damage during shipment or missing parts, please contact our customer service team. We are available to assist with refunds, replacements, or any product-related inquiries.

For support, please refer to the contact information provided with your purchase or visit the official XINLEI websitu.