NICGIGA 10-Port PoE+ Switch User Manual

1. Introduzione

This manual provides instructions for the NICGIGA 10-Port PoE+ Switch, an unmanaged network switch designed to provide Power over Ethernet (PoE) capabilities. It features 8 10/100Mbps PoE+ ports and 2 Gigabit uplink ports, supporting IEEE 802.3af/at standards. This device is suitable for extending network connectivity and powering compatible devices such as IP cameras, IP phones, and wireless access points.

Figure 1: The NICGIGA 10-Port PoE+ Switch, model FS0820GP, shown with its retail packaging. The switch features 8 PoE ports and 2 uplink ports.

2. Produttu Finituview

2.1 Funzioni chjave

• 10 Ports Total: 8x 10/100Mbps PoE+ ports and 2x Gigabit uplink ports.
• PoE+ Power Budget: Maximum 120W total, up to 30W per PoE port, compliant with IEEE 802.3af/at.
• Unmanaged Plug-and-Play: No configuration required for basic operation.
• VLAN Isolation: Ports 1-8 can be isolated to reduce network traffic and enhance security.
• 250m Extend Mode: Allows PoE transmission up to 250 meters at 10Mbps speed.
• Disegnu durable: Metallo casing with 4KV lightning protection and fanless operation for silent performance.
• Opzioni di montaggio: Supports desktop, wall, or 19-inch rack installation.

2.2 Port Layout and Indicators

Figura 2: Detailed view of the NICGIGA 10-Port PoE+ Switch, highlighting the 8x 10/100Mbps PoE ports, 2x 1000Mbps uplink ports, power input, and VLAN/Extend mode switch.

The front panel includes 8 PoE ports (1-8) and 2 uplink ports (9-10). Each port has LED indicators for link/activity and PoE status. A switch on the front panel allows toggling between Default (VLAN Off) and VLAN (VLAN On/Extend) modes.

2.3 Cuntenuti di u pacchettu

• NICGIGA 10-Port PoE+ Switch (Model FS0820GP)
• Adattatore di putenza
• Rack Mount Kit (2 pieces)
• Pacchettu di viti
• Guida Quick Start

Figura 3: Illustrazione di l'articuli inclusi in l'imballu di u pruduttu.

3. Setup

The NICGIGA PoE+ Switch is designed for simple plug-and-play operation, requiring no software configuration.

1. Cunnette à u putere: Connect the included power adapter to the switch's power input and then to a power outlet. The power indicator LED on the switch will illuminate.
2. Cunnette i dispusitivi di rete:
   • Connect PoE-compatible devices (e.g., IP cameras, IP phones, wireless APs) to ports 1-8 using standard Ethernet cables. The switch will automatically detect and provide power to these devices.
   • Connect non-PoE network devices (e.g., routers, NVRs, PCs) to the uplink ports 9-10 for network connectivity.
3. Verificate a cunnessione: Check the LED indicators for each connected port. A solid green or amber light typically indicates a successful link, and a blinking light indicates data activity.

Figure 4: Simple three-step plug-and-play setup: Connect to Power, Connect Devices, and Enjoy.

3.1 Opzioni di muntatura

The switch can be placed on a desktop, mounted on a wall, or installed in a 19-inch rack using the provided rack mount kit.

Figure 5: Wall mounting dimensions (200mm x 118mm x 44mm) and an example of 19-inch rack mounting with multiple switches.

4. Modi upirativu

The switch features a mode switch on the front panel to select between Default and VLAN/Extend modes.

4.1 VLAN Isolation Mode

When the VLAN switch is enabled, ports 1-8 are isolated from each other. This means devices connected to these ports cannot directly communicate with each other. All communication from ports 1-8 is routed through the uplink ports (9-10). This feature helps to reduce network broadcast storms, improve network security, and optimize performance for specific applications like surveillance systems.

Figure 6: Illustration of VLAN isolation where ports 1-8 are isolated from each other but communicate with uplink ports 9-10.

4.2 Extend Mode

The Extend Mode is typically activated when VLAN mode is enabled. In this mode, the transmission distance for PoE ports (1-8) is extended up to 250 meters (820 feet) at a reduced speed of 10Mbps. This is beneficial for deploying devices in remote locations where standard 100-meter Ethernet cable limits are insufficient.

Figure 7: Comparison of Default Mode (10/100Mbps, 100m) and Extend Mode (10Mbps, 250m) for PoE links.

5. Specificazioni

6. Risoluzione di prublemi

• Nisun putere: Ensure the power adapter is securely connected to the switch and a working power outlet. Check the power indicator LED.
• Nisun ligame / attività: Verify that Ethernet cables are properly connected to both the switch and the network device. Try a different cable or port. Ensure the connected device is powered on.
• U dispusitivu PoE ùn s'accende micca: Confirm the device is PoE-compatible (IEEE 802.3af/at). Check the PoE status LED for the port. Ensure the total power consumption of all connected PoE devices does not exceed the 120W budget.
• Slow Network Speed in Extend Mode: This is expected behavior. In Extend Mode, the data rate is reduced to 10Mbps to achieve longer transmission distances (up to 250m).
• Network Isolation Issues: If devices on ports 1-8 cannot communicate with each other, verify if VLAN mode is enabled. This is the intended behavior for VLAN isolation.

7. Mantenimentu

• Pulizia: Use a soft, dry cloth to clean the exterior of the switch. Do not use liquid cleaners or aerosols.
• Ventilazione: Ensure adequate airflow around the switch. Although it has a fanless design, proper ventilation helps with heat dissipation.
• Ambiente: Operate the switch within its specified temperature and humidity ranges to ensure optimal performance and longevity.
• Firmware: As an unmanaged switch, firmware updates are generally not required or available.

8. Garanzia è Support

Each NICGIGA PoE switch undergoes rigorous testing for reliability, quality, and performance. For any questions or technical assistance during use, please contact NICGIGA customer support.