STINGER CTSGM-49

Manuale d'usu di u modulu di sustituzione radio Connects2 CTSGM-49

Model: CTSGM-49 | Brand: STINGER

Introduzione

The Connects2 CTSGM-49 Radio Replacement Module is designed to facilitate the installation of an aftermarket car stereo in select GM vehicles manufactured between 2004 and 2016. This module ensures the retention of critical factory functions, including steering wheel controls and various vehicle chimes, while preventing fault codes in the vehicle's Electronic Control Module (ECM).

Funzioni di u produttu

  • Radio Replacement Simplification: Streamlines the integration of an aftermarket head unit into your vehicle's existing electrical system.
  • Steering Wheel Control (SWC) Retention: Maintains the functionality of your factory steering wheel buttons for audio control (volume, track, etc.).
  • Factory Chime Retention: Preserves all original vehicle chimes, including safety and warning alerts (e.g., low fuel, seatbelt, park assist).
  • ECM Fault Code Prevention: Sends correct data to the vehicle's ECM to prevent fault codes that can occur when the factory radio is removed, ensuring proper vehicle diagnostics.
  • Accessory Power Output: Provides a +12V switched accessory power source (rated at 0.3A) for the aftermarket radio. Note: This output is not intended to power the head unit directly.

Cuntenutu di u pacchettu

Connects2 CTSGM-49 Radio Replacement Module with wiring harnesses and chime speaker

The Connects2 CTSGM-49 package includes the following components:

  • Connects2 CTSGM-49 Radio Replacement Module
  • Vehicle-specific Wiring Harnesses
  • Chime Speaker (for factory chime retention)

Image shows the main module, various wiring harnesses for vehicle integration, and a small speaker for retaining factory chimes.

Cumpatibilità di i veiculi

This module is compatible with a range of GM vehicles. Please refer to the table below to confirm your vehicle's compatibility and supported steering wheel control functions. Note that some vehicles may not be compatible if fitted with factory navigation for specific model years.

Vehicle Compatibility Table for Connects2 CTSGM-49 module

The table details compatible Buick, Chevrolet, GMC, Hummer, Pontiac, Saturn, and Suzuki models, their respective years, harness type (A, B, C), and whether Steering Wheel Control (SWC) functions are supported (Y/N). Specific notes regarding factory navigation compatibility are also included.

Key Compatibility Notes:

  • Buick: Enclave (2008-2012), Lucerne (2006-2010)
  • Chevrolet: Avalanche (2007-2013), Cobalt (2005-2010), Equinox (2007-2009), Express Van (2008-2016), HHR (2006-2011), Impala/Impala SS (2006-2013), Malibu (2004-2012), Monte Carlo (2006-2007), Silverado 1500-3500 (2007-2013), Suburban (2007-2014), Tahoe (2007-2014), Traverse (2009-2012). Note: Suburban/Tahoe/Sierra/Yukon models from 2012-2013 are not compatible if fitted with factory navigation.
  • GMC: Acadia (2007-2012), Savana (2008-2016), Sierra 1500-3500 (2007-2013), Yukon (2007-2014), Yukon XL (2007-2014).
  • Hummer: H2 (2008-2009)
  • Pontiac: G5 (2007-2009), G6 (2005-2009), Solstice (2007-2009), Torrent (2007-2009)
  • Saturnu: Aura (2007-2009), Outlook (2008-2009), Sky (2007-2009)
  • Suzuki: XL7 (2007-2010)

Guida d'installazione

Installation of the CTSGM-49 module requires basic automotive electrical knowledge. It is recommended to consult a professional installer if you are unsure about any steps. Always disconnect the vehicle's battery before beginning installation.

Passi generali di l'installazione:

  1. Preparate u veiculu: Ensure the vehicle's ignition is off and disconnect the negative terminal of the battery.
  2. Sguassà a radio di fabbrica: Carefully remove the existing factory radio from the dashboard.
  3. Cunnette i cablaggi: Connect the vehicle-specific wiring harnesses from the CTSGM-49 module to the vehicle's factory wiring. Ensure all connections are secure.
  4. Connect Aftermarket Radio: Connect the other end of the CTSGM-49 harnesses to your aftermarket car stereo's wiring. Pay close attention to power, ground, speaker, and accessory wire connections.
  5. Integrate Chime Speaker: Connect the provided chime speaker to the designated output on the CTSGM-49 module. Position the speaker in a location where chimes can be clearly heard but are not obstructed.
  6. Piazzamentu di u Modulu: Securely mount the CTSGM-49 module in a safe, dry location behind the dashboard, away from moving parts or heat sources.
  7. Sistema di prova: Reconnect the vehicle's battery. Turn on the ignition and test the aftermarket radio's functionality, including audio, steering wheel controls, and factory chimes. Verify that no new warning lights appear on the dashboard.
  8. Riassemblà u Dashboard: Once all functions are confirmed, carefully reassemble the dashboard components.

For detailed wiring diagrams and specific vehicle instructions, please refer to the comprehensive installation manual provided with your product or consult the manufacturer's websitu.

Operazione

Once installed, the Connects2 CTSGM-49 module operates automatically to maintain factory functions. There are no user-adjustable settings on the module itself.

Cuntrolli di u volante:

Your factory steering wheel controls will function as they did with the original radio, allowing you to control basic functions of your aftermarket head unit such as:

  • Volume Up / Down
  • Track Up/Down (Next/Previous)
  • Selezzione di Modu / Fonte
  • Call Answer/End (if supported by your aftermarket radio and vehicle)

The specific functions retained may vary slightly depending on your vehicle's original configuration and the capabilities of your aftermarket radio.

Factory Chimes:

All factory chimes (e.g., seatbelt warning, door ajar, low fuel, park assist) will continue to sound through the dedicated chime speaker provided with the module. The volume of these chimes is typically controlled by the vehicle's factory settings or is fixed.

Risoluzione di prublemi

If you encounter issues after installing the CTSGM-49 module, consider the following common troubleshooting steps:

PrublemuCausa PossibileSoluzione
Nisuna alimentazione à a radio di u mercatu di ricambio.Incorrect wiring, blown fuse, or module not receiving power.Check all wiring connections, especially power and ground. Verify vehicle fuses. Ensure the module is properly connected to the vehicle's power source. Remember the module's accessory power output is 0.3A and not for powering the head unit directly.
I cumandamenti di u volante ùn funzionanu micca.Incorrect SWC wiring, incompatible aftermarket radio, or vehicle not supported for SWC retention.Verify the SWC wires are correctly connected between the module and the aftermarket radio. Check your aftermarket radio's manual for SWC input configuration. Confirm your vehicle model and year are listed as supporting SWC in the compatibility table.
No factory chimes or chimes are too quiet/loud.Chime speaker not connected, faulty speaker, or incorrect module connection.Ensure the chime speaker is securely connected to the module. Check the speaker for damage. Verify all module connections are firm. Chime volume is typically fixed by the vehicle's system.
Check Engine Light or other warning lights appear.Module not communicating correctly with vehicle's ECM.Double-check all module connections. Ensure the module is receiving proper power and data signals. If issues persist, consult a professional installer or vehicle technician.

If troubleshooting steps do not resolve the issue, please contact STINGER customer support for further assistance.

Specificazioni

  • Numero di mudellu: CTSGM-49
  • Marca: stinger
  • Materiale: Acrilonitrila Butadiene Stirone
  • Pesu di l'articulu: 5.6 once
  • Dimensioni di u pacchettu: 9 x 4.5 x 1.75 inch
  • Tipu di cunnessu: Rectangular Or Circular Connector
  • Accessory Power Output: +12V, 0.3A (max)
  • Cumpatibilità: Select GM Buick/GMC/Hummer/Pontiac/Saturn/Suzuki Vehicles (2004-2016) with GM LAN 29 Bit system.

Garanzia è Supportu

STINGER products are designed for reliability and performance. For information regarding warranty coverage, technical support, or replacement parts, please visit the official STINGER websitu o cuntattate u so dipartimentu di serviziu di u cliente.

Produttore: stinger

Data prima dispunibule: 6 settembre 2024

For the most up-to-date support resources, please visit the STINGER Store on Amazon o u so ufficiale websitu.

Documenti cunnessi - CTSGM-49

Preview Guida d'installazione di u kit di rimpiazzamentu di a radio Stinger SRX-GM14128 HORIZON12 per Silverado/Sierra
Guida d'installazione cumpleta per u kit Stinger SRX-GM14128, chì permette l'installazione di u sistema d'infotainment multimediale HORIZON12 di 12.8 pollici in i camion Chevrolet Silverado è GMC Sierra 2014-2019 mantenendu e caratteristiche di fabbrica.
Preview Guida d'installazione di Stinger HEIGH10 UN1810E-FD5 per Ford Transit Custom
This installation guide provides detailed instructions for fitting the Stinger HEIGH10 10-inch infotainment touch screen solution into a Ford Transit Custom (2018 onwards). It covers stereo removal, unit assembly, fascia plate setup, wiring key, steering wheel control functionality, connection steps, and technical assistance.
Preview Guida d'installazione di u kit di rimpiazzamentu di a radio Stinger SR-GM14HX HORIZON10 per Chevrolet Silverado è GMC Sierra (2014-2019)
Detailed installation guide for the Stinger SR-GM14HX Radio Replacement Kit, enabling the installation of the HORIZON10 modular radio in select 2014-2019 Chevrolet Silverado and GMC Sierra trucks. Covers features, components, tools, disassembly, wiring, and final installation.
Preview Guida di l'utente di Stinger HORIZON10 SRK-GM14HX - Installazione è Funzionamentu
Guida cumpleta per l'utente di u sistema d'infotainment Stinger HORIZON10 SRK-GM14HX, chì copre l'installazione, e funzioni, i paràmetri è a risoluzione di i prublemi per i camion Chevrolet Silverado è GMC Sierra.
Preview Guida d'installazione di Stinger HEIGH10 per Ford Ranger 2016+
Guida cumpleta d'installazione per a suluzione di schermu tattile d'infotainment integratu Stinger HEIGH10 per i mudelli Ford Ranger 2016+. Include a rimuzione di u stereo, l'installazione di a piastra di fascia è a cunfigurazione di l'interfaccia.
Preview Kit d'installazione Stinger SRK-JK11HX HORIZON10 per Jeep Wrangler JK (2011-2018) - Guida d'installazione
Guida d'installazione cumpleta per u kit d'integrazione Stinger SRK-JK11HX HORIZON10 per i mudelli Jeep Wrangler JK 2011-2018. Amparate cumu installà, cunnette u cablaggio è cunservà e caratteristiche di u veiculu.