1. Importanti Instructions Safety
Please read all instructions carefully before operating the Milex Nordic Ice Machine. Retain this manual for future reference.
- Assicuratevi chì l'apparecchiu sia piazzatu nantu à una superficia stabile è piana, luntanu da a luce diretta di u sole è da fonti di calore.
- Ùn immergete micca u cavu di alimentazione, a spina, o alcuna parte di l'apparecchiu in acqua o altri liquidi.
- Stu apparecchiu hè solu per l'usu domesticu. Ùn aduprate micca fora.
- Survegliate i zitelli quandu l'apparechju hè in usu.
- Unplug the ice machine from the power outlet before cleaning or when not in use.
- Ùn operate micca l'apparechju cù un cordone o una spina dannatu, o dopu chì l'apparechju hà malfunzionatu o hè statu dannatu in ogni modu.
- Allow the unit to stand upright for at least 2 hours before first use if it has been transported horizontally. This allows the refrigerant to settle.
- Aduprate solu acqua potabile in u serbatoiu d'acqua.
- Ùn bluccate micca l'aperture di ventilazione. Assicuratevi una circulazione d'aria adatta intornu à l'unità.
2. Produttu Finituview
Familiarize yourself with the components of your Milex Nordic Ice Machine.
Figura 2.1: Fronte view of the Milex Nordic Ice Machine, showcasing its sleek stainless steel housing and transparent lid.
Componenti principali:
- Pannellu di cuntrollu: Located on the top, with indicator lights and buttons for operation.
- Coperchio trasparente: Permette viewing of the ice-making process and ice level.
- Cesta di ghiaccio: Cestinu amovibile per a raccolta è a conservazione di u ghiaccio.
- Cisterna d'acqua: Reservoir for water, located beneath the ice basket.
- Scoop di ghiaccio: Inclusu per a recuperazione igienica di u ghjacciu.
- Tappo di scarico: Situatu in fondu per scorrere l'acqua.
3. Setup
Follow these steps to set up your ice machine for the first time.
- Imballà: Carefully remove the ice machine from its packaging. Remove all packing materials, tape, and labels.
- Posizione: Place the ice machine on a flat, stable, and heat-resistant surface. Ensure there is at least 15 cm (6 inches) of space around the unit for proper ventilation.
- State dritti: If the unit was transported horizontally, allow it to stand upright for at least 2 hours before plugging it in. This ensures the compressor oil settles correctly.
- Pulita: Before first use, clean the interior of the ice machine as described in the 'Maintenance and Cleaning' section.
- Connect Power: Inserite u cordone di alimentazione in una presa elettrica messa a terra.
4. Operating Instructions
Operating your Milex Nordic Ice Machine is straightforward.
Figura 4.1: Visual guide showing the three main steps: adding water, selecting ice size, and the ice production process.
4.1 Pruduzzione iniziale di ghiaccio
- Aghjunghjite l'acqua: Open the lid and fill the water tank with potable water up to the 'MAX' fill line. Do not overfill.
- Power On: Press the 'POWER' button on the control panel. The power indicator light will illuminate.
- Selezziunate a taglia di u ghjacciu: Press the 'SELECT' button to choose between small or large ice cubes. The corresponding indicator light will illuminate.
- U ciclu di principiu: The machine will automatically begin the ice-making cycle. The first batch of ice may take approximately 8-15 minutes, depending on the selected size and ambient temperature.
- Monitor: The 'ICE FULL' indicator light will illuminate when the ice basket is full. The machine will pause operation. The 'ADD WATER' indicator light will illuminate when the water tank needs refilling.
- Recuperà u ghjacciu: Use the provided ice scoop to remove ice from the basket. Once ice is removed, the machine will resume operation if water is present.
Figura 4.2: Detailed view of the control panel with indicator lights and freshly made bullet-shaped ice cubes.
4.2 Avvisi intelligenti
- Aghjunghjite l'indicatore d'acqua: When this light illuminates, the water level in the tank is low. Refill the water tank to continue ice production.
- Indicatore di ghiaccio pienu: When this light illuminates, the ice basket is full. Remove ice to allow the machine to resume operation.
5. Mantenimentu è Pulizia
Regular cleaning ensures optimal performance and extends the life of your ice machine.
5.1 Pulizia di ogni ghjornu
- Dopu ogni usu, scollegate l'unità.
- Drain any remaining water from the water tank by removing the drain plug at the bottom of the unit.
- Wipe the interior with a soft cloth and a mild detergent solution. Rinse thoroughly.
- Dry all surfaces completely before storing.
5.2 Pulizia mensili
- Prepare a cleaning solution of water and white vinegar (1:1 ratio) or a commercial ice machine cleaner.
- Pour a suluzione in u tank d'acqua.
- Run a few ice-making cycles (discard the ice produced during this cleaning process).
- Drain the solution completely and rinse the water tank thoroughly with clean water several times.
- Asciugà l'esterno cù publicitàamp tela.
Attenzione: Do not use abrasive cleaners or sharp objects to clean the ice machine, as this may damage the surfaces.
6. Risoluzione di prublemi
Riferitevi à sta sezione per i prublemi cumuni è e so suluzioni.
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| Ice machine not turning on | Nisuna alimentazione elettrica | Verificate s'ellu u cavu di alimentazione hè bè inseritu in una presa di corrente funzionale. |
| 'ADD WATER' indicator is on | Water tank is empty or low | Refill the water tank with potable water up to the 'MAX' line. |
| 'ICE FULL' indicator is on | A cesta di ghiaccio hè piena | Remove ice from the basket. The machine will resume operation. |
| Nisuna pruduzzione di ghiaccio | Insufficient water, high ambient temperature, or air blockage | Ensure water tank is full. Place the machine in a cooler environment. Check for proper ventilation. |
| Ice cubes are too small or clumpy | Water temperature too high, or first cycle | Use colder water. The first few cycles may produce smaller ice. Ensure the machine has proper ventilation. |
7. Specificazioni
Technical details for the Milex Nordic Ice Machine MIM003.
- Mudellu: MIM 003
- putenza: 220-240V, 50Hz
- Capacità di u cisterna d'acqua: 2.8 litri
- Capacità di pruduzzione di ghiaccio: Up to 15kg per day
- Capacità di almacenamentu di ghiaccio: Finu à 1.5 kg
- Ice Cycle Time: 8-10 minutes per cycle (9 ice bullets)
- Ice Options: Large or Small bullet-shaped ice
- Materiale: Custodia in acciaio inox
- Dimensions (Box): 458 mm x 290 mm x 462 mm
- Pesu di l'articulu: 12 kg
8. Garanzia è Assistenza Clienti
For warranty information, technical assistance, or customer support, please contact Milex customer service. Refer to your purchase documentation for specific warranty terms and contact details.
Di solitu pudete truvà l'infurmazioni di cuntattu di supportu nantu à u situ ufficiale di u fabricatore. websitu web o per mezu di u vostru rivenditore.
