Diymore Humidity and Temperature Controller Socket User Manual

1. Introduzione

This manual provides comprehensive instructions for the Diymore Humidity and Temperature Controller Socket. This device is designed to precisely control humidity and temperature in various environments, such as incubators, terrariums, greenhouses, and storage areas. It features multiple operating modes, calibration functions, and an alarm system to maintain desired environmental conditions.

2. Informazioni di sicurezza

Please read all safety instructions before operating the device. Failure to follow these instructions may result in electric shock, fire, or damage to the product.

• Ensure the power supply matches the device's specifications (230V, 16A, max 3680W).
• Do not immerse the device or sensor in water or expose it to excessive moisture.
• Ùn disassemble o mudificà u dispusitivu.
• Mantene fora di a portata di i zitelli.
• Unplug the device from the power outlet before cleaning or maintenance.
• Aduprà solu in ambienti interni secchi.

3. Caratteristiche di u produttu

The Diymore Controller Socket offers a range of features for precise environmental control:

• Quattru Modi Operativi: Humidification, Dehumidification, Heating, and Cooling.
• Wide Control Range: Humidity 20-95%RH; Temperature -10°C to 50°C (14°F to 122°F).
• Adjustable Start/Stop Values: Program connected devices to activate based on set humidity/temperature thresholds.
• Funzione di calibrazione: Real-time adjustment for humidity (-10~10%RH) and temperature (-9.9~9.9°C).
• Funzione d'alarme: Audible alarm when humidity or temperature exceeds set limits.
• Memoria di dati: Retains all settings after a power failure.
• Funzione di reset: Allows restoration of factory settings.
• Button Tone Settings: Customize button feedback.
• Error Prompt Function: Provides indications for operational issues.
• °C/°F Switching: Cambià facilmente trà l'unità di temperatura Celsius è Fahrenheit.

Figura 3.1: Overview of Diymore Controller Socket features, including humidity and temperature control, alarm functions, calibration, and memory.

4. Cuntenutu di u pacchettu

U pacchettu include i seguenti articuli:

• 1 x Diymore Humidity and Temperature Controller Socket (230V)
• 1 x External Sensor Probe

5. Produttu Finituview è Dimensioni

Familiarize yourself with the device's components and dimensions.

Figura 5.1: Diymore Controller Socket with external sensor.

Figura 5.2: Product dimensions of the controller and sensor.

The main unit measures approximately 13.1 cm (5.11 in) in height, 6 cm (2.36 in) in width, and 3.2 cm (1.25 in) in depth. The sensor probe measures approximately 5.5 cm (2.16 in) in length and 2.3 cm (0.90 in) in width.

6. Setup

1. Imballà: Carefully remove the controller and sensor from the packaging.
2. Cunnette u sensore: Ensure the external sensor probe is securely plugged into the designated port on the side of the controller.
3. Sensore di pusizione: Place the sensor in the area where you wish to monitor and control humidity and temperature. Ensure it is not directly exposed to water or extreme conditions that could damage it.
4. Cunnettà si: Insert the controller's plug into a standard 230V power outlet. The display will illuminate.
5. Connect Appliance: Plug your humidifier, dehumidifier, heater, or cooler into the socket on the front of the controller.

7. Operating Instructions

The controller features four buttons: MODE, SET, SU/CLK, è GIÙ.

7.1. Unità di temperatura di cambiamentu (°C/°F)

Per cambià trà Celsius (°C) è Fahrenheit (°F):

• Appughjà è tene premutu SET button for 3 seconds. The temperature unit on the display will change.

7.2. Selezzione Modu Operating

The device supports four main operating modes: Humidification (HC mode), Dehumidification (HC mode), Heating (TC mode), and Cooling (TC mode). Press the MODE button repeatedly to cycle through these modes.

Figura 7.1: Examples of the four working modes and alarm settings.

7.3. Setting Humidity/Temperature Control Values

Per definisce i valori di partenza è di fine desiderati per l'umidità o a temperatura:

1. Press u MODE button to select either HC (Humidity Control) or TC (Temperature Control) mode.
2. Press u SET button once. The "Start Humidity" or "Start Temperature" value will begin to flash.
3. Aduprà u SU/CLK è GIÙ buttons to adjust the desired start value.
4. Press u SET button again. The "Stop Humidity" or "Stop Temperature" value will flash.
5. Aduprà u SU/CLK è GIÙ buttons to adjust the desired stop value.
6. Press u SET button a third time, or wait a few seconds, to save the settings and exit.

Nota: For humidification/heating, the start value should be lower than the stop value. For dehumidification/cooling, the start value should be higher than the stop value.

7.4. Setting Alarm Function

The device can trigger an alarm if humidity or temperature goes outside a set range.

1. Press u MODE button to select either HC Alarm (Humidity Alarm) or TC Alarm (Temperature Alarm) mode.
2. Press u SET button once. The alarm threshold value will flash.
3. Aduprà u SU/CLK è GIÙ buttons to adjust the desired alarm threshold.
4. Press u SET button again, or wait a few seconds, to save the setting and exit.

When the measured humidity/temperature exceeds the set alarm value, the hygrostat will emit an audible alarm sound.

7.5. Funzione di calibrazione

To calibrate the humidity or temperature readings:

• Appughjà è tene premutu SU/CLK button. The calibration value will appear and flash.
• Aduprà u SU/CLK è GIÙ buttons to adjust the calibration offset.
  • Humidity correction range: -10%RH to 10%RH
  • Temperature correction range: -9.9°C to 9.9°C
• Appughjà è tene premutu MODE button to save the calibration and exit.

7.6. Altre funzioni

• Memoria di dati: The device automatically saves all setting parameters, which are retained even after a power failure.
• Funzione di reset: To restore factory settings, refer to the specific instructions in the full manual (if available) or contact support.
• Button Tone Settings: The device allows for customization of button sounds. Refer to the full manual for detailed instructions.
• Turn Off Alarm Sound: Specific instructions for turning off the alarm sound are typically found in the full manual.

8. Applicazioni

The Diymore Controller Socket is versatile and suitable for various applications requiring precise humidity and temperature control:

• Incubatori
• Domestic Reptile Habitats
• Poultry Houses
• Mushroom Cultivation
• Glass Containers / Terrariums
• Serre
• Humidifiers and Dehumidifiers
• Household and Industrial Environments
• Cantine à vinu
• Frigoriferi
• Magazzini

Figura 8.1: Diverse applications of the Diymore Controller Socket.

9. Mantenimentu

• Pulizia: Disconnect the device from power before cleaning. Wipe the unit with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Cura di i sensori: Keep the sensor clean and free from dust or debris. Avoid bending or damaging the sensor cable.
• Conservazione: If storing the device for an extended period, unplug it and store it in a dry, cool place.

10. Risoluzione di prublemi

If you encounter issues with your Diymore Controller Socket, refer to the following common problems and solutions:

11. Specificazioni

12. Garanzia è Support

For warranty information or technical support, please refer to the documentation included with your purchase or contact Diymore customer service through their official website or the retailer where the product was purchased. Please have your model number (temperatuur vochtigheid) and purchase date available when contacting support.