Introduzione
This manual provides detailed instructions for the safe and effective use of your VGR Professional Hair Clipper (V-003) and T-Blade Trimmer (V-906) set. Please read all instructions carefully before first use and retain this manual for future reference.
Importante infurmazione di sicurezza
For your safety, always follow these precautions:
- Evitate l'usu nantu à i zitelli.
- Keep the trimmer away from water sources. Do not use while bathing or showering.
- Segui e procedure di pulizia è manutenzione raccomandate cum'è descritte in questu manuale.
- Use with caution to prevent skin irritation or eye injury from cutting blades.
- Ùn pruvate micca di riparà u dispusitivu sè stessu. Cuntattate l'assistenza clienti per l'assistenza.
- Assicuratevi chì u dispusitivu hè cumplettamente carica prima di l'usu per mantene u rendiment ottimali.
Cuntenutu di u pacchettu
Your VGR Professional Hair Clipper and Trimmer Set includes the following items:
- 1 x VGR V-003 Professional Hair Clipper
- 1 x VGR V-906 T-Blade Trimmer
- 6 x Guide Combs for Clipper (1.5mm, 3mm, 4.5mm, 6mm, 9mm, 12mm)
- 3 x Limiting Combs for Trimmer (1mm, 2mm, 3mm)
- 2 x Cavi di carica USB
- 2 x Blade Protective Caps
- 1 x spazzola di pulizia
- 1 x Lubricant Oil
- 1 x Manuale d'utilizatore
Figure 1: Complete set of VGR Hair Clipper and Trimmer with accessories.
Product Overview
Tagliacapelli professionale VGR V-003
Figure 2: VGR V-003 Hair Clipper with key features.
- Ceramic and Powder Metallurgy Blades: Designed for long-lasting sharpness and reduced overheating.
- Lever conique réglable : Allows for precise cutting length adjustments from 0.5mm to 2.5mm.
- Motore putente: Operates at up to 9000 RPM with two speed adjustments for various hair textures.
- Display LED: Shows real-time power level.
- Long Life Battery: 2500mAh battery provides up to 250 minutes of run time on a 3-hour charge.
- Carica USB: Supports both corded and cordless operation.
VGR V-906 T-Blade Trimmer
Figure 3: VGR V-906 T-Blade Trimmer with key features.
- DLC-Coated T-Blades: Zero-gap design for ultra-fine trimming and precise lines.
- Motore putente: Reaches 9000 RPM for smooth and delicate grooming results.
- Display LED: Shows real-time power level.
- Long Life Battery: 2000mAh battery provides up to 240 minutes of run time on a 2.5-hour charge.
- Carica USB: Supports both corded and cordless operation.
Istituisci
1. Carica iniziale
Before first use, fully charge both the hair clipper and trimmer. Connect the USB charging cable to the device and a suitable USB power adapter (not included). The LED display will indicate charging status and battery level.
- V-003 Clipper: Approximately 3 hours for a full charge, providing up to 250 minutes of use.
- V-906 Trimmer: Approximately 2.5 hours for a full charge, providing up to 240 minutes of use.
Figure 4: V-003 Clipper charging.
Figure 5: V-906 Trimmer charging.
2. Attaccà i pettini guida
Select the desired guide comb for your preferred hair length. Align the comb with the blade and push it firmly until it clicks into place. To remove, gently pull the comb away from the blade.
- V-003 Clipper: Use the 6 larger guide combs (1.5mm to 12mm).
- V-906 Trimmer: Use the 3 smaller limiting combs (1mm to 3mm) for detail work.
Figure 6: Attaching guide combs to the clipper and trimmer.
3. Adjusting the Taper Lever (V-003 Clipper Only)
The taper lever on the side of the V-003 clipper allows for fine adjustment of cutting length without changing guide combs. Move the lever up for a shorter cut (0.5mm) and down for a longer cut (2.5mm). This is ideal for blending and fading.
Figure 7: Taper lever adjustment on the V-003 Clipper.
Istruzzioni di funziunamentu
1. Power On / Off
Press the power button to turn the device on. Press it again to turn off. The LED display will illuminate when the device is on.
2. Speed Adjustment (V-003 Clipper)
The V-003 clipper features two speed settings. Press the power button briefly while the device is on to toggle between the two speeds, up to 9000 RPM. Use a lower speed for finer hair or sensitive areas, and a higher speed for thicker hair.
3. Hair Clipping (V-003 Clipper)
- Ensure hair is clean and dry.
- Attaccate u pettine guida desideratu.
- Adjust the taper lever if needed for blending.
- Hold the clipper with the blades pointing upwards and move against the direction of hair growth.
- Use smooth, overlapping strokes for an even cut.
Figure 8: Using the VGR V-003 Clipper for hair cutting.
4. Detail Trimming (V-906 Trimmer)
- For precise lines and edges, use the trimmer without a comb or with a limiting comb (1-3mm).
- Hold the trimmer at a slight angle to the skin.
- Use light pressure and short, controlled strokes to define hairlines, beard edges, and sideburns.
Figure 9: Using the VGR V-906 Trimmer for detailing.
Mantenimentu
1. Pulizia di e lame
After each use, turn off the device and remove any attached guide comb. Use the provided cleaning brush to remove loose hairs from the blades. For a more thorough cleaning, the blades can be carefully detached (refer to specific blade removal instructions if provided in a separate diagram, otherwise, clean while attached).
2. Oliatura di e lame
Regularly oil the blades to maintain optimal cutting performance and extend their lifespan. Apply 1-2 drops of the provided lubricant oil onto the blades while the device is running for a few seconds. Wipe off any excess oil with a soft cloth.
Figure 10: Cleaning brush and lubricant oil.
3. Storage
Store the clipper and trimmer in a dry, cool place, away from direct sunlight and moisture. Always attach the blade protective cap when not in use to prevent damage to the blades.
Risoluzione di prublemi
| Prublemu | Causa Possibile | Soluzione |
|---|---|---|
| U dispositivu ùn accende micca. | A batteria hè scaricata. | Caricà u dispusitivu cumplettamente cù u cavu USB furnitu. |
| Scarse prestazioni di taglio o strappamentu di capelli. | Blades are dull, dirty, or not oiled. Hair is too thick for current speed setting. | Clean and oil the blades. Ensure blades are free of debris. For V-003, try a higher speed setting. |
| L'apparechju si riscalda durante l'usu. | Extended continuous use. Blades may need oiling. | Allow the device to cool down. Apply lubricant oil to the blades. |
| U display LED ùn funziona micca. | Malfunzionamentu di u dispusitivu. | Cuntattate l'assistenza clienti. |
Specificazioni
- Marca: VGR
- Numeri di mudellu: V-003 (Clipper), V-906 (Trimmer)
- Fonte di energia: Alimentatu da a batteria (ricaricabile USB)
- V-003 Clipper Battery: 2500mAh Li-ion, up to 250 minutes run time, 3 hours charge time
- V-906 Trimmer Battery: 2000mAh Li-ion, up to 240 minutes run time, 2.5 hours charge time
- Blade Material (V-003): Ceramic and Powder Metallurgy
- Blade Material (V-906): DLC-Coated
- Velocità di u Motore: Up to 9000 RPM (2 adjustable speeds for V-003)
- Pettini guida per a tosatrice: 1.5 mm, 3 mm, 4.5 mm, 6 mm, 9 mm, 12 mm
- Trimmer Limiting Combs: 1 mm, 2 mm, 3 mm
- Clipper Taper Lever Adjustment: 0.5 mm - 2.5 mm
- Pesu di l'articulu: 560 grammi
- Dimensioni di u pacchettu: 11.38 x 9.76 x 3.54 inch
Garanzia è Supportu
VGR products come with a 1-year warranty from the date of purchase. For any product inquiries, technical support, or warranty claims, please contact our customer support team. We offer 24-hour support to assist you.
Figure 11: VGR Customer Support and Warranty Information.
For further assistance, please visit the official VGR websitu o cuntattate direttamente u venditore.
