Manuale d'usu di u bollitore in acciaio inox EMERIO WK-132230

Introduzione

Thank you for choosing the EMERIO WK-132230 Stainless Steel Kettle. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read these instructions carefully before first use and keep them for future reference.

The EMERIO WK-132230 kettle features a 1.7-liter capacity, double-wall insulation, precise temperature control from 40°C to 100°C, pre-programmed tea settings, and a BPA-free design, ensuring a safe and convenient experience for heating water.

Importanti Istruzzioni di Sicurezza

Quandu s'utilice l'apparecchi elettrici, deve esse sempre seguitu e precauzioni basi di sicurezza per riduce u risicu di focu, scossa elettrica è ferite à e persone.

• Leghjite tutte e struzzioni prima di utilizà l'apparechju.
• Ùn toccu superfici calde. Aduprate manichi o pomi.
• To protect against fire, electric shock, and injury, do not immerse cord, plugs, or the power base in water or other liquids.
• A vigilazione stretta hè necessaria quandu qualsiasi apparecchiu hè utilizatu da o vicinu à i zitelli.
• Scollegate da a presa quandu ùn hè micca in usu è prima di pulisce. Lasciate rinfriscà prima di mette o toglie pezzi, è prima di pulisce l'apparechju.
• Ùn aduprate micca alcun apparecchiu cù un cordone o una spina dannighjata, o dopu chì l'apparecchiu ùn funziona micca bè o hè statu dannighjatu in qualchì modu. Cuntattate u serviziu clienti per un esame, una riparazione o una regulazione.
• L'usu di accessori accessori micca cunsigliatu da u fabricatore di l'apparechju pò causà incendi, scossa elettrica o ferite persunale.
• Ùn aduprate micca fora.
• Ùn lasciate micca u cordone pendu nantu à u bordu di una tavula o un bancu, o toccu superfici calde.
• Ùn mette micca sopra o vicinu à un bruciatore di gas o elettricu caldu, o in un fornu cale.
• Attaccate sempre prima a spina à l'apparecchiu, dopu inserite u cavu in a presa murale. Per disconnectà, mette qualsiasi cuntrollu in "off", dopu cacciate a spina da a presa murale.
• Ùn aduprate micca l'apparechju per un usu altru ch'è destinatu.
• Assicuratevi sempre chì u coperchio sia ben chjusu durante l'operazione.
• Do not overfill the kettle above the maximum fill line, as boiling water may be ejected.
• Do not operate the kettle if it is underfilled below the minimum fill line, as this may cause damage to the heating element.
• The kettle is designed for heating water only. Do not heat other liquids or food.
• This appliance is equipped with boil-dry protection. If the kettle is accidentally switched on without water, it will automatically switch off. Allow it to cool down before refilling.

Product Overview

The EMERIO WK-132230 kettle features a sleek design with a matte black finish and a wooden-look handle. Its double-wall construction ensures efficient insulation and a cool-touch exterior.

• Kettle Body (Stainless Steel Interior, Plastic Exterior)
• Coperchio à cerniera
• Maniglia resistente à u calore
• Digital Display with Touch Controls
• Base di alimentazione cù almacenamentu di cavi
• Concealed Heating Element
• Water Level Markings (Min/Max)

Istituisci

1. Unpacking: Carefully remove the kettle and all accessories from the packaging. Retain the packaging for future storage or transport.
2. Placement: Place the power base on a dry, flat, and stable surface, away from the edge of the counter and out of reach of children. Ensure there is sufficient space around the kettle for steam to escape.
3. Pulizia di u primu usu: Before using for the first time, fill the kettle with fresh water up to the maximum fill line. Boil the water (100°C) and then discard it. Repeat this process 2-3 times to remove any manufacturing residues.

Istruzzioni di funziunamentu

1. Riempite u bollitore: Open the hinged lid and fill the kettle with fresh water. Do not fill below the minimum (MIN) mark or above the maximum (MAX) mark (1.7 liters). Close the lid securely.
2. Piazzamentu nantu à a basa di putenza: Place the kettle firmly onto the power base. Ensure it is properly seated.
3. Accensione è selezzione di a temperatura:
   

   

   • Pulsà u buttone di accensione (An/Aus on the display image) to turn on the kettle. The digital display will illuminate.
   • Manual Temperature Selection: Aduprate i buttoni di regulazione di a temperatura (Temperatur einstellung on the display image, represented by '+' and '-' symbols) to select your desired temperature between 40°C and 100°C in 5°C increments. The current temperature will be displayed prominently.
   • Pre-programmed Tea Varieties: The display offers 4 pre-programmed temperature settings optimized for different types of tea (e.g., green tea, black tea, herbal tea). Touch the corresponding icon to select.
   • Once the desired temperature is set, the kettle will begin heating the water. The display will show the water's current temperature as it heats.
4. Funzione di mantene u calore: After selecting your desired temperature, press the keep warm button (Mantene a funzione calda on the display image, represented by a wavy line icon). The kettle will maintain the selected temperature for up to 2 hours.
5. Chjaratu automaticu: The kettle will automatically switch off once the selected temperature is reached or if it is lifted from the power base during operation.
6. Versa : Carefully lift the kettle from its base and pour the hot water. The drip-free spout ensures clean pouring.

Mantenimentu

Una pulizia è una manutenzione regulare prolungheranu a vita di u vostru bollitore.

1. Pulizia di l'esterno: Unplug the kettle and allow it to cool completely. Wipe the exterior with a soft, damp tela. Ùn aduprate micca detergenti abrasivi o chimichi duri.
2. Pulizia di l'Internu: For general cleaning, rinse the interior with fresh water. Do not use abrasive materials that could scratch the stainless steel.
3. Decalcificazione: Over time, mineral deposits (limescale) may build up inside the kettle, especially in hard water areas. Descale your kettle regularly (e.g., monthly or every two months) to maintain efficiency.
   
   • Fill the kettle with a mixture of water and white vinegar (1:1 ratio) or a citric acid solution (follow product instructions).
   • Boil the solution and let it stand for at least 30 minutes, or longer for heavy scale.
   • Discard the solution and rinse the kettle thoroughly with fresh water several times to remove any residue and odor.

Risoluzione di prublemi

Specificazioni

Garanzia è Supportu

Per infurmazioni nantu à a garanzia è l'assistenza à i clienti, vi pregu di cunsultà a ducumentazione furnita cù u vostru acquistu o cuntattate u vostru rivenditore. Cunservate a vostra prova d'acquistu per qualsiasi reclamazione di garanzia.