Baseus Super Energy Pro+ Jump Starter Powerbank User Manual

1. Introduzione

The Baseus Super Energy Pro+ Jump Starter Powerbank is a versatile device designed to jump-start 12V vehicles and serve as a portable power bank for electronic devices. It features a 12,000mAh battery capacity and a peak current of 1200A, suitable for various vehicle types.

Image 1.1: Baseus Super Energy Pro+ Jump Starter Powerbank shown with different vehicle types, illustrating its broad compatibility.

2. Produttu Finituview è Features

This device combines the functionality of a car jump starter and a power bank. Key features include:

• Currente di punta alta: Provides up to 1200A peak current for effective vehicle starting.
• Capacità di a batteria: 12,000mAh / 44.4Wh for multiple uses.
• Multifunzionale: Serves as both a jump starter and a portable power bank.
• Display Digitale: Indica u livellu di carica di a bateria.
• Luce LED d'emergenza: Features multiple lighting modes for safety.
• Prutezzione di polarità inversa: Integrated safety mechanism to prevent damage from incorrect connections.
• Ampia cumpatibilità: Suitable for 12V vehicles with engines up to 8L (diesel) or 3.5L (gasoline).

Image 2.1: The jump starter displaying its digital battery percentage and highlighting its 1200A peak current capability.

Image 2.2: Visual representation of the 1200A high current output, powered by a 3-battery system.

3. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli sò presenti in u pacchettu:

• 1x Baseus Super Energy Pro+ Jump Starter Powerbank
• 1x Power Cable (USB-C)
• 1x Car Cable (EC5/Clamps)

4. Getting Started: Charging the Device

Before initial use, fully charge the jump starter. It is recommended to keep the device charged above 50% for optimal performance.

1. Connect the provided USB-C power cable to the jump starter's input port.
2. Cunnette l'altra estremità di u cavu USB-C à un adattatore di alimentazione USB cumpatibile (micca inclusu).
3. The digital display will show the charging progress. Charge until the display indicates 100%.

Imagine 4.1: Latu view of the jump starter, illustrating the various ports for charging and output.

5. Operating Instructions

5.1. Avviamentu di u vostru veiculu cù l'aiutu di l'aiutu

Ensure the jump starter is sufficiently charged before attempting to start a vehicle.

1. Connect the Smart Ignition Terminals: Insert the smart ignition terminals (EC5 connector) into the jump starter's EC5 interface. The indicator lights on the terminals will flash red and green, indicating readiness.
2. Attaccà à a batteria di a vittura: Open the car's hood. Connect the red clamp à u terminal pusitivu (+) di a bateria di a vittura è u cl neruamp à u terminal negativu (-).
3. Cumincià a vittura: Return to the vehicle and start the engine.
4. Disconnect: Once the car starts, immediately disconnect the jump starter from the car battery. First remove the clamps from the battery terminals, then disconnect the smart ignition terminals from the jump starter.

Image 5.1: A user connecting the jump starter clamps to a car battery, demonstrating the correct procedure.

5.2. Usu cum'è una batteria esterna

The jump starter can charge mobile phones, tablets, and other USB-powered devices.

• Connect your device's charging cable to one of the USB-A output ports on the jump starter.
• U starter di jump cumincerà automaticamente à caricà u vostru dispositivu.

5.3. Using the Emergency LED Light

The built-in LED light offers multiple modes for various situations.

• Press and hold the power button to turn on the emergency lighting mode.
• Press the power button again to cycle through SOS mode and Strobing mode.
• Press and hold the power button again to turn off the light.

Image 5.2: The jump starter's emergency LED light illuminating an engine bay, showing its utility in low-light conditions.

6. Precauzioni di sicurità

• Do not short-circuit the jump starter.
• Ùn espone micca l'apparechju à temperature estreme (sopra i 60 °C o sottu à -20 °C).
• Mantene fora di a portata di i zitelli.
• Ùn disassemble o mudificà u dispusitivu.
• Ensure correct polarity when connecting to a car battery. The smart clamps feature reverse polarity protection, which will trigger an alarm if connected incorrectly.
• Disconnect the jump starter immediately after the vehicle starts.

Image 6.1: Close-up of the smart clamps, emphasizing the built-in reverse polarity protection feature.

7. Mantenimentu è Storage

• Conservate l'iniziatore di salto in un locu frescu è seccu, luntanu da a luce diretta di u sole.
• Charge the device every 3-6 months if not in regular use to maintain battery health.
• Pulite l'apparechju cù un pannu dolce è asciuttu. Ùn aduprate micca prudutti chimichi aggressivi o materiali abrasivi.

8. Risoluzione di prublemi

• U dispositivu ùn si accende micca: Ensure the device is charged. If the battery level is very low, it may require a few minutes of charging before it can power on.
• U veiculu ùn parte micca: Verificate chì u clamps are securely connected to the correct battery terminals (red to positive, black to negative). Ensure the jump starter has sufficient charge. The vehicle's battery may be severely discharged or damaged, requiring professional assistance.
• Reverse polarity alarm: If the smart clamps emit a buzzing sound, disconnect them immediately and re-attach them to the correct battery terminals.
• Charging slow or not at all: Ensure the charging cable and adapter are functioning correctly.

9. Specifiche tecniche

Image 9.1: Display of various international certifications for the product, ensuring compliance and safety standards.

10. Garanzia è Support

For warranty information or technical support, please refer to the official Baseus websitu o cuntattate u vostru rivenditore lucale. Cunservate a vostra ricevuta d'acquistu per e richieste di garanzia.