1. Introduzione
This manual provides instructions for the proper use and maintenance of the Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, model 4710-1205. This electronic depth gage is designed for precise depth measurements in various industrial and scientific applications. It features a digital display for clear readings and is constructed for durability and accuracy.
Image 1.1: The Dasqua 7 Piece 0-16-Inch Electronic Depth Gage Set, showing the main unit and various measurement rods.
2. Cuntenutu di u pacchettu
Verificate chì tutti i cumpunenti sò presenti in u pacchettu:
- Electronic Depth Gage Unit
- Set of Measurement Rods (7 pieces)
- Casu di almacenamentu
- Warranty Letter
Image 2.1: The complete Dasqua Electronic Depth Gage Set, including the main unit, measurement rods, and storage case.
3. Funzioni chjave
- Risoluzione: 0.0005-inch / 0.01mm for precise measurements.
- Conformità standard: Manufactured in accordance with DIN863 standards.
- Spindle: Hardened, ground, and lapped for enhanced accuracy.
- Versatilità: Designed to accommodate a broad range of measurement applications.
- Display: Large, digital display for clear and quick readings.
- Custruzzione: Hardened stainless steel base and rods resist wear, ensuring durability and consistent accuracy.
- Reset Zero: Ability to reset to zero at any position for comparative depth measurements.
4. Setup Instructions
4.1. Installazione di batterie
The electronic depth gage typically uses a CR2032 lithium coin cell battery. To install or replace the battery:
- Truvate u coperchiu di u compartimentu di a batteria nant'à u spinu di l'unità di visualizazione digitale.
- Aduprate un picculu cacciavite o una munita per apre u coperchio.
- Inserite una nova batteria CR2032 cù u latu pusitivu (+) rivoltu in sopra.
- Sustituite a tappa di u compartmentu di a batteria in modu sicuru.
4.2. Attaching Measurement Rods
Select the appropriate measurement rod for the desired depth range. The set includes rods of various lengths.
- Identify the threaded end of the measurement rod.
- Carefully screw the rod into the threaded hole at the bottom of the depth gage's base until it is finger-tight. Do not overtighten.
- Ensure the rod is securely attached and straight.
Image 4.1: The electronic depth gage with a measurement rod properly attached to its base.
Image 4.2: A selection of the hardened stainless steel measurement rods provided with the depth gage set.
5. Operating Instructions
5.1. Power On / Off
- Press u ON/OFF buttone per accende u dispusitivu.
- Press u ON/OFF button again to power off the device.
5.2. Unit Conversion (Inch/Millimeter)
- Press u mm/in button to switch between millimeter (mm) and inch (in) units. The selected unit will be displayed on the screen.
5.3. Impostazione di u zeru
The zero-reset function allows for comparative measurements or setting a reference point.
- Place the depth gage on a flat, stable reference surface, ensuring the measurement rod is fully retracted or resting on the surface.
- Press u ZERU button. The display will show '0.000' or '0.00'.
5.4. Piglià una misura
- Ensure the depth gage is zeroed on a reference surface.
- Place the base of the depth gage firmly on the surface from which the depth is to be measured.
- Lower the measurement rod into the hole or recess until its tip contacts the bottom.
- Leghjite a misurazione direttamente da u display digitale.
5.5. Funzione Hold
- Press u HOLD buttone per bluccà a lettura attuale nantu à u display.
- Press u HOLD di novu u buttone per liberà a lettura è vultà à a misurazione in diretta.
Imagine 5.1: Dettagliata view of the digital display, showing the ON/OFF, mm/in, HOLD, and ZERO buttons.
6. Mantenimentu
6.1. Pulizia
- Wipe the depth gage and rods with a clean, dry, lint-free cloth after each use.
- Per a sporcizia ostinata, aduprate un pannu ligeramente asciugatu.ampened with isopropyl alcohol. Avoid harsh chemicals or solvents.
- Ensure no liquid enters the electronic components.
6.2. Storage
- Store the depth gage in its protective case when not in use.
- Mantene u dispusitivu in un ambiente asciuttu, luntanu da a luce diretta di u sole, temperature estreme è alta umidità.
- Sè vo almacenate a batteria per un periodu prolongatu, cacciate a batteria per impedisce perdite.
6.3. Sustituzione di batterie
Replace the battery when the display becomes dim or erratic. Refer to Section 4.1 for battery installation instructions.
7. Risoluzione di prublemi
- U display hè viotu o scuru:
Check battery installation. Replace the battery if necessary. Ensure the device is powered on. - Letture imprecise:
Ensure the depth gage is properly zeroed on a flat reference surface. Clean the measurement rod and base to remove any debris. Verify the measurement rod is securely attached. - I buttoni ùn rispondenu micca:
Check battery level. If the issue persists after battery replacement, contact customer support.
8. Specifications Product
| Specificazione | Detail |
|---|---|
| Numero di mudellu | 4710-1205 |
| Gamma di misurazione | 0-16 inch / 0-400 mm |
| Risoluzione | 0.0005 inch / 0.01 mm |
| Accuratezza | 0.0015 inch / 0.03 mm |
| Materiale | Acciaiu inox tempratu |
| Fonte d'energia | CR2032 Battery (typical) |
| Dimensioni di u pacchettu | 9 x 5 x 2 inch |
| Pesu di l'articulu | 12.8 once |
Image 8.1: Detailed specifications and dimensional diagram for the Dasqua 0-16 inch Electronic Depth Gage Set.
9. Garanzia è Support
This product is supplied with a warranty letter. For specific warranty terms and conditions, please refer to the documentation included in your package. For technical support, service, or inquiries regarding your Dasqua 4710-1205 Electronic Depth Gage Set, please contact the manufacturer directly through their official websitu o canali di serviziu di u cliente.
