1. Introduzione
This manual provides essential instructions for the safe and effective use, installation, operation, and maintenance of your CHBMSS Half Steel Pressure Gauge, model EN 837-1 213.53.100. Please read this manual thoroughly before using the device and retain it for future reference.
Figura 1: Fronte view of the CHBMSS Half Steel Pressure Gauge.
2. Informazioni di sicurezza
Osservate e seguenti precauzioni di sicurezza per prevene ferite è danni à u dispusitivu:
- Always ensure the pressure gauge is installed by qualified personnel.
- Do not exceed the maximum rated pressure of the gauge.
- Verify compatibility of the gauge material with the measured medium.
- Protect the gauge from excessive vibration, shock, and extreme temperatures.
- Regularly inspect the gauge for any signs of damage or wear.
3. Caratteristiche di u produttu
- Standard Interface Design: Ensures broad compatibility with various systems.
- High-Precision Measurement: Utilizes digital circuitry and high-precision pressure sensors for accurate pressure and vacuum readings.
- Dati in tempu reale: Capable of real-time testing of pressure and relative temperature, aiding in systematic installation or maintenance based on standard pressure and temperature relationships.
4. Specificazioni
| Attributu | Valore |
|---|---|
| Numero di mudellu | EN 837-1 213.53.100 |
| Dial Size | 100 mm |
| Gamma di pressione | -1 to 0 bar / -0.1 to 0 MPa |
| Pesu di l'articulu | 500 grammi (1.1 libbra) |
| Dimensioni di u pacchettu | 1.18 x 0.79 x 0.39 inch |
| U fabricatore | CHBMSS |
| ASIN | B0F3C87G2K |
5. Setup è Installazione
Proper installation is crucial for accurate readings and device longevity. Follow these general guidelines:
- Sceglie u locu: Choose a location free from excessive vibration, direct heat, and corrosive environments.
- Muntamentu: Securely mount the gauge using appropriate fittings. Ensure the gauge face is easily visible.
- Cunnessione: Connect the gauge to the pressure source using compatible and properly sealed fittings. Avoid overtightening.
- Verifica di Fuga: After installation, slowly apply pressure and check all connections for leaks using a suitable leak detection method.
Figura 2: Side view showing the gauge's connection point.
6. Operating Instructions
The CHBMSS Half Steel Pressure Gauge is designed for straightforward operation:
- Lettura di u calibru: The gauge displays pressure in both bar and MPa. The inner scale typically indicates MPa, and the outer scale indicates bar. Read the value indicated by the needle.
- Vacuum Measurement: For vacuum applications, the needle will move into the negative range, indicating vacuum pressure.
- Considerazioni ambientali: Ensure the operating environment is within the specified temperature and humidity ranges for optimal performance.
7. Mantenimentu
Regular maintenance ensures the accuracy and longevity of your pressure gauge:
- Pulizia: Clean the gauge face and casing cù un dolce, damp tela. Ùn aduprate micca detergenti abrasivi o solventi.
- Ispezione: Periodically check for any physical damage, such as cracks in the casing or bent needles. Ensure the connection remains secure and free of leaks.
- calibrazione: For critical applications, periodic calibration by a certified technician is recommended to maintain accuracy.
Figura 3: Torna view of the pressure gauge.
8. Risoluzione di prublemi
If you encounter issues with your pressure gauge, consider the following:
- Nisuna lettura / Lettura incorretta:
- Check for blockages in the pressure line.
- Verify the gauge is correctly connected and sealed.
- Ensure the pressure source is active.
- Fluctuating Needle:
- This may indicate pressure pulsations in the system. Consider installing a snubber or dampener.
- Check for excessive vibration at the mounting point.
- Leakage at Connection:
- Tighten connections appropriately.
- Replace seals or thread tape if necessary.
9. Garanzia è Support
This CHBMSS product is covered by a standard manufacturer's warranty against defects in materials and workmanship. Please refer to your purchase documentation for specific warranty terms and duration.
For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the CHBMSS customer service department. Contact information can typically be found on the product packaging or the official CHBMSS websitu.
