Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) User Manual

1. Produttu Finituview

The Cudy AC1200 Outdoor Wireless Access Point (AP1200 Outdoor) is designed to provide reliable and high-speed Wi-Fi connectivity in outdoor environments. It supports the latest 802.11ac Wave 2 technology, offering dual-band Wi-Fi speeds up to 867 Mbps on 5 GHz and 300 Mbps on 2.4 GHz. Key features include MU-MIMO, Beamforming, IP65 waterproof rating, 4KV lightning protection, and flexible Power over Ethernet (PoE) options.

Figure 1: Cudy AP1200 Outdoor Wireless Access Point Overview

2. Cuntenutu di u pacchettu

Verificate chì u vostru pacchettu cuntene tutti l'articuli elencati quì sottu:

• AP1200 Outdoor Wireless Access Point
• Adattatore di putenza
• Detachable Antennas (2 units)
• Cordone d'alimentazione
• Sustituzione Kit
• Cavu Ethernet
• Guida d'installazione (questu manuale)

3. Ferramentu Overview

3.1 Apparizione fisica

Figure 2: Cudy AP1200 Outdoor Access Point

3.2 Indicatori LED

U dispusitivu hà parechji indicatori LED per mustrà u so statu:

• LED di putenza: Indica u statu di putenza.
• LED LAN: Indicates Ethernet connection status.
• 2.4GHz Wi-Fi LED: Indicates 2.4GHz wireless activity.
• 5GHz Wi-Fi LED: Indicates 5GHz wireless activity.

3.3 Porte è buttoni

The device includes the following ports and buttons:

• RJ45 Port (PoE-IN): Used for both data and power input via Power over Ethernet.
• Pulsante di reset: Adupratu per restaurà i paràmetri di fabbrica.
• Connettori d'antenna: Two RP-SMA connectors for detachable antennas.

Figure 3: RJ45 Port with PoE-IN

4. Setup è Installazione

4.1 Attaccà l'antenne

Carefully screw the two detachable 5dBi antennas onto the RP-SMA connectors on the device. Ensure they are securely fastened but do not overtighten.

Figure 4: Antennas Attached to AP1200 Outdoor

4.2 Power over Ethernet (PoE) Connection

The AP1200 Outdoor supports 802.3at/af PoE or 24~50V passive power supply. Use the included PoE adapter to power the device and connect it to your network.

1. Connect one end of an Ethernet cable to the LAN port of your router or network switch.
2. Connect the other end of this Ethernet cable to the 'LAN' port on the PoE adapter.
3. Connect one end of the included Ethernet cable to the 'PoE' port on the PoE adapter.
4. Open the protective cover on the AP1200 Outdoor and connect the other end of the Ethernet cable from the PoE adapter to the RJ45 (PoE-IN) port on the AP.
5. Plug the PoE adapter into a power outlet. The device will power on, and the Power LED will illuminate.

4.3 Opzioni di muntatura

The AP1200 Outdoor can be mounted on a pole or a wall using the provided mounting kit. Choose a location that offers optimal Wi-Fi coverage and is protected from direct impact.

• Montaggio di u polu: Use the straps and brackets to secure the device to a pole.
• Montatura à u muru: Use screws and anchors to attach the device to a wall.

Figure 5: Mounting Options (Wall and Pole)

5. Modi upirativu

The Cudy AP1200 Outdoor supports multiple operating modes to suit various network requirements:

• Modu Puntu di Accessu (AP): Connects to a wired network and transforms it into a wireless network, allowing multiple Wi-Fi devices to connect.
• Modu Extender: Estende a cupertura di una rete wireless esistente.
• Modu Router: Functions as a primary router, providing internet access to connected devices.
• Modu WISP: Connects wirelessly to an Internet Service Provider (ISP) network and shares the connection with local devices.
• Mesh Router Mode: Creates a seamless mesh Wi-Fi network with other compatible devices.

Modu Punto d'Accessu

Modu Router

Modu Ripetitore

Modu WISP

6. Configurazione

To configure the AP1200 Outdoor, connect a computer to the device via Ethernet or Wi-Fi. Access the webinterfaccia di gestione basata in a web navigatore.

1. Ensure your computer is connected to the AP1200 Outdoor (either directly via Ethernet or to its default Wi-Fi network).
2. apre a web navigatore è inserite l'indirizzu IP predefinitu (di solitu 192.168.10.1 or refer to the Quick Installation Guide) in the address bar.
3. Inserite u nome d'utilizatore è a password predefiniti (in generale admin per tramindui).
4. Follow the on-screen wizard to set up your desired operating mode, Wi-Fi name (SSID), and password.
5. Save your settings and restart the device if prompted.

7. Mantenimentu

7.1 Aghjornamenti di u firmware

Regularly check for and install firmware updates to ensure optimal performance, security, and access to new features. Visit the Cudy official website for the latest firmware for your AP1200 Outdoor model.

7.2 Pulizia

As an outdoor device with an IP65 rating, the AP1200 Outdoor is protected against dust and water. However, periodic cleaning can help maintain its appearance and prevent excessive buildup. Use a soft, damp pannu per asciugà l'esternu. Ùn aduprate micca prudutti chimichi aggressivi o detergenti abrasivi.

7.3 Considerazioni Ambientali

The device is designed to operate in a wide range of outdoor temperatures (-40°C to 65°C). Ensure proper ventilation and avoid placing it in direct sunlight for prolonged periods if possible, to maximize lifespan.

Figure 6: Weather-Proof Design

8. Risoluzione di prublemi

If you encounter issues with your AP1200 Outdoor, refer to the following common troubleshooting steps:

• Nisun putere: Ensure the PoE adapter is correctly plugged into a power outlet and the Ethernet cable is securely connected to the AP's PoE-IN port. Check the power LED.
• Nisun accessu à Internet: Verify that your main router has internet access. Check the Ethernet cable connections between the router, PoE adapter, and AP. Ensure the AP is configured in the correct operating mode.
• Segnale Wi-Fi debule: Adjust the antenna orientation. Relocate the AP to a more central position or higher elevation. Check for physical obstructions.
• Ùn possu accede Web Pagina di gestione: Ensure your device is connected to the AP's network. Verify the IP address entered in the browser is correct. Try clearing your browser's cache or using a different browser.
• Reset di Factory: If problems persist, you may need to perform a factory reset. With the device powered on, use a paperclip to press and hold the Reset button for approximately 5-10 seconds until the LEDs flash. The device will restart with factory default settings.

9. Specificazioni

10. Garanzia infurmazione

Cudy products are backed by a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Cudy websitu. Conservate a vostra ricevuta d'acquistu cum'è prova d'acquistu per e richieste di garanzia.

11. Support tecnicu

If you require further assistance or have questions not covered in this manual, please contact Cudy Technical Support. You can find contact information, FAQs, and additional resources on the official Cudy websitu:

• Websitu: www.cudy.com
• E-mail: Riferite à u websitu per indirizzi email di supportu.