BBLD 9301-1E

BBLD 1/18 Scale RC Car (Model 9301-1E) Instruction Manual

1. Introduzione

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your BBLD 1/18 Scale RC Car, Model 9301-1E. Please read this manual thoroughly before operating the vehicle to ensure optimal performance and longevity.

2. Ciò chì hè in a scatula

Your BBLD RC Car package includes the following items:

BBLD 1/18 Scale RC Car and included accessories

Image: The BBLD 1/18 Scale RC Car, remote control, two batteries, USB charging cable, and various tools included in the package.

3. Produttu Finituview

The BBLD 1/18 Scale RC Car is an IPX4 waterproof 4X4 off-road truck designed for various terrains. It features a robust RC380 brushed motor and a 2.4GHz anti-interference remote control system.

Funzioni chjave:

BBLD RC Car demonstrating high speed on a dirt track

Image: The BBLD RC Car in action, highlighting its speed capability of 40KM/H.

BBLD RC Car with two batteries, illustrating 45 minutes of playtime

Image: The BBLD RC Car with two batteries, emphasizing the extended playtime of 45 minutes.

BBLD RC Car remote control with labeled functions

Image: The 2.4GHz remote control system for the BBLD RC Car, showing controls for forward, brake, backward, steering, steering trim, speed switch, and indicator light.

BBLD RC Car with off-road tires on various terrains

Image: The BBLD RC Car showcasing its off-road tires designed for diverse terrains including snow and mud.

BBLD RC Car components including lights, shell, motor, shock absorbers, bearings, and tires

Imagine: Dettagliata view of the BBLD RC Car's components: cool car lights, environmental PVC car shell, long-lasting and powerful motor, adjustable shock absorber, 15-grain bearing, and 69mm all-terrain rubber tire.

BBLD RC Car dimensions and accessories

Image: The BBLD RC Car with its dimensions (11.42in/290mm length, 7.68in/195mm width, 5.12in/130mm height) and a list of included accessories.

Video ufficiali di u pruduttu:

Video: Una breve premessaview mostraasing the BBLD Remote Control Car's ability to conquer various terrains and its off-road performance, including driving through water.

Video: A brief demonstration of the BBLD RC Truck's features and capabilities.

4. Setup

Battery Installation (Vehicle)

  1. Remove the four body clips located on each corner of the car's shell.
  2. Carefully lift the car's shell to expose the internal components.
  3. Connect the red battery connector from the battery to the corresponding red connector on the vehicle's internal wiring. Ensure a secure connection.
  4. Secure the battery using the hook-and-loop strap provided in the battery compartment.
  5. Replace the car's shell and re-insert the four body clips.

Installazione di a batteria (telecomandu)

  1. Aprite u coperchiu di u compartmentu di a batteria in u spinu di u telecomando.
  2. Insert 4 x AA batteries (not included) into the compartment, ensuring correct polarity.
  3. Chiudere a tappa di u compartimentu di a batteria.

Caricà e Batterie

  1. Connect the white plug from the battery to the USB charging cable.
  2. Plug the USB charging cable into a 5V/0.5-2.0A USB adapter (e.g., computer USB port, USB wall adapter).
  3. The indicator light on the USB charger will show charging status (e.g., red for charging, green for fully charged).
  4. Charging typically takes approximately 1.5 hours per battery.

Pairing the Remote Control and Vehicle

  1. Ensure the vehicle's battery is connected and secured.
  2. Turn on the remote control by pressing and holding the power button until the indicator light flashes.
  3. Turn on the vehicle by sliding the ON/OFF switch located inside the chassis.
  4. The remote control and vehicle will automatically pair. The indicator lights on the transmitter and ESC should flash during binding and remain solid on the ESC after successful binding.

5. Operating Instructions

Familiarize yourself with the remote control functions before operating the vehicle.

Funzioni di cuntrollu remoto:

Cunsiglii di guida:

6. Mantenimentu

Manutenzione generale:

Cura di a batteria:

Battery Charging Safety Instructions for BBLD RC Car

Image: Important safety instructions for battery charging, including warnings against unattended charging, damaged chargers, and improper battery handling.

7. Risoluzione di prublemi

Vede a seguente tavula per i prublemi cumuni è e so suluzioni:

PrublemuCausa PossibileSoluzione
Vehicle Stop WorkingCar battery is flat or damagedFully charge the battery pack. If charging does not work, use a new battery. Check if there is a problem with the charging cable. If so, replace it with a new one.
E batterie di telecomando ùn sò micca stallate bèCheck and confirm that the battery is installed properly.
Vehicle is not connected with transmitterCheck to ensure that the transmitter and car are connected. The LEDs on the transmitter and ESC should flash during binding and remain solid on the ESC after binding.
Prutezzione di overheatIf the vehicle body is driven at high temperatures for a long time, it may turn on the protection and cut off the power to avoid the risk of overheating and damage to the motor. Take out the vehicle battery and wait for it to cool down completely and fully recharge.
Parts damagedCheck for damaged parts such as wires, connectors, motors, ESCs, axles, etc. Repair or replace if necessary.
Vehicle works, but has poor or no steeringCar battery is flat or damagedFully charge the battery pack. Or replace it if needed.
Steering trim not properly setAdjust the 'ST. TRIM' on the transmitter to check whether the tires can be steered.
Parts loose or damagedCheck if the steering linkage is loose/broken or if the servo is faulty.
Incapable of connection / Short control rangeCar/transmitter battery is flat or damagedCheck and fully charge the battery pack, or replace it if needed.
A distanza di cuntrollu hè troppu longaCheck to be within signal transmission distance.
Interferenza di signaleStop driving and try to operate the vehicle in a new area. If the problem persists, contact the after-sales service.
Corta vita di a batteriaOld/worn-out batteryLook for swelling, deformation, edge damage. Replace with new battery.
Batteria micca cumpletamente caricataEnsure proper charging following battery charging guidelines.
Constant high-speed/rapid accelerationAvoid sustained high speeds and sudden acceleration to extend battery life.
Sluggish PerformanceDirty or damaged drivetrain/suspensionInspect and replace any broken gears, shafts, outdrive cups, suspension components, etc.
Batteria ùn hè micca caricaAdattatore sbagliatu utilizatuOnly use 5V/0.5-2.0A adapter. Incorrect adapter may damage battery/charger.
Over-discharged or damaged batteryCheck battery pack condition and replace if needed.
Damaged USB chargerCheck USB cable/charger following charging instructions and replace if needed.
Vehicle Does Not ReverseBatteria bassaEnsure battery is fully charged before operating.
Incorrect throttle center point setupTurn power off/on without moving trigger until the vehicle is bound with the transmitter to allow ESC/Receiver's auto-setup of the throttle center point.
Incorrect trigger operationCenter trigger first, then pull back to go in reverse, to allow ESC/Receiver's auto-setup of the throttle center point.
Damaged waterproof ESC/Receiver or transmitterReplace the waterproof ESC/Receiver unit or transmitter.

8. Specificazioni

9. Informazioni di sicurezza

10. Garanzia è Support

Your BBLD RC Car comes with a 12-month extended warranty. For any technical support, missing parts, or warranty claims, please contact BBLD US directly through their official channels or the Amazon seller support page.

Documenti cunnessi - 9301-1E

Preview Team Associated RC8B4.1e 1:8 Scale Electric Off-Road Competition Buggy Assembly Manual
This is the assembly manual for the Team Associated RC8B4.1e, a 1:8 scale 4WD electric off-road competition buggy kit. It provides detailed, step-by-step instructions, parts lists, and helpful tips for building the model.
Preview Siemens GMA..1 Air Damper Actuators: Technical Datasheet
Detailed technical specifications, functions, and ordering information for Siemens GMA..1 series rotary air damper actuators. Covers two-position, three-position, and modulating control types with spring return functionality, suitable for HVAC applications.
Preview VRX-1E 1/8 Scale 4WD Brushless Ready-to-Run Truggy Instruction Manual
Comprehensive instruction manual for the VRX-1E 1/8 Scale 4WD Brushless Ready-to-Run Truggy, covering features, technical data, safety precautions, battery handling, charging, storage, and parts lists.
Preview Manuale d'usu è guida di cunfigurazione di Carisma MSA-1E Suzuki Jimny JB74 Crawler in scala 1/24
Manuale d'usu cumpletu è guida di cunfigurazione per u Carisma MSA-1E Crawler in scala 1/24, chì presenta a carrozzeria Suzuki Jimny JB74. Include istruzioni di cunfigurazione, precauzioni di sicurezza, identificazione di e parti è specifiche tecniche.
Preview Istruzioni di montaggio di attuatori Siemens
Istruzzioni di montaggio per l'attuatori Siemens, cumpresi schemi di cablaggio è specifiche tecniche per i mudelli G..A161.1E/MO, G..B161.1E/MO, GEB161.1E/MO è GIB161.1E/MO.
Preview Nozioni tecniche di base di u regulatore compactu VAV Siemens OpenAir™ KNX/PL-Link G..B181.1E/KN
Documentazione tecnica per i cuntrolli compatti Siemens OpenAir™ VAV (KNX/PL-Link G..B181.1E/KN), chì copre i principii basi di u dispusitivu, l'installazione, l'ingegneria, a messa in serviziu è e specifiche tecniche per i sistemi di automatizazione di l'edifici.