1. Introduzione
The Cudy C200P is a versatile hardware AP controller and VPN router designed for efficient network management. It offers centralized control for up to 200 access points, advanced VPN capabilities, and flexible power options. This manual provides essential information for setting up, operating, and maintaining your C200P device.
2. Cuntenutu di u pacchettu
Verificate chì tutti l'articuli sò presenti in u vostru pacchettu:
- Cudy C200P Hardware AP Controller and VPN Router
- Adattatore di putenza
- Cavu Ethernet
- Guida d'installazione rapida
3. Ferramentu Overview
Figura 3.1: Fronte view of the Cudy C200P showing the USB 3.0 port, Reset button, 4 Gigabit LAN ports, and 1 Gigabit WAN port.
Panel frontale
- Portu USB 3.0: For connecting external storage devices to create a network storage and file-sharing hub.
- Pulsante di reset: Adupratu per restaurà i paràmetri di fabbrica.
- LAN (PoE Out) Ports (1-4): Four Gigabit Ethernet ports that provide Power over Ethernet (PoE) output to connected devices when the C200P is powered via DC input.
- WAN (PoE In) Port (5): One Gigabit Ethernet port for connecting to your internet service provider (ISP) modem. This port also supports PoE input to power the C200P, disabling PoE output on LAN ports 1-4.
- Indicatori LED:
- Left LED (System): Indica u statu di u sistema.
- Right LED (PoE Active): Indicates PoE activity on the LAN ports.
Panel posteriore
- Input d'alimentazione DC: For connecting the included power adapter. Provides 55W total PoE output when used.
4. Setup
Follow these steps to set up your Cudy C200P.
4.1 Cunnessione fisica
- Connect your ISP modem to the WAN (PoE In) port (Port 5) on the Cudy C200P using an Ethernet cable.
- Connect your computer or other network devices to the LAN (PoE Out) ports (Ports 1-4) using an Ethernet cable.
- If you are using DC power, connect the provided power adapter to the DC power input port and plug it into a power outlet. If you are powering the C200P via PoE through the WAN port, skip this step.
- Power on the Cudy C200P. The system LED indicator will light up.
4.2 Configurazione iniziale
- apre a web browser on a computer connected to the C200P's LAN port.
- Inserite l'indirizzu IP predefinitu (di solitu
192.168.1.1or as specified in the Quick Installation Guide) into the address bar and press Enter. - Log in using the default username and password (refer to the Quick Installation Guide for default credentials).
- Follow the on-screen wizard to complete the initial setup, including setting a new administrator password and configuring basic network settings.
5. Operating the Cudy C200P
5.1 AP Controller Functionality
The C200P can centrally manage up to 200 Cudy Access Points (APs).
- AP Discovery: The controller automatically discovers compatible Cudy APs on the network.
- Batch Configuration: Configure SSID, security settings, and other Wi-Fi parameters across multiple APs simultaneously.
- Aggiornamenti di firmware: Perform batch firmware upgrades for all managed APs from a single interface.
- Channel/Power Adjustment: Optimize Wi-Fi performance by adjusting channel and power settings for individual or groups of APs.
Figure 5.1: Centralized AP Management with Cudy C200P, illustrating quick setup, batch configuration, batch upgrade, multi-SSID, and reboot schedule features.
5.2 Advanced VPN Router
The C200P supports various VPN protocols for secure remote access and site-to-site tunneling.
- Protocolli Supportati: WireGuard, OpenVPN, IPsec, and ZeroTier.
- Cunfigurazione: Access the VPN settings in the web interface to set up VPN clients or servers.
Figure 5.2: Powerful VPN Server and Client setup, demonstrating secure connections between different locations using the Cudy C200P.
5.3 Portal Captive
Implement a captive portal for guest networks with dual authentication modes.
- Open Access: Allows guests to connect without a password.
- Local Password Authentication: Requires guests to enter a pre-defined password.
- persunalizazione: Customize the login page for branding or informational purposes.
Figure 5.3: Captive Portal functionality, showing customizable login pages for guest access in various business environments.
5.4 Port USB 3.0
The USB 3.0 port allows you to expand network capabilities.
- Archiviazione di rete: Connect an external USB storage device to create a network-attached storage (NAS) solution.
- File spartera : sparte files across your network from the connected USB device.
6. Mantenimentu
6.1 Upgrade di u firmware
Regularly check for and install firmware updates to ensure optimal performance and security. Firmware can be updated via the web interfaccia di gestione.
6.2 Reboot Schedule
Configure a reboot schedule for the device to maintain stability and performance.
Figure 6.1: Network Maintenance features, including options for scheduling reboots and Wi-Fi operation.
6.3 Reset di fabbrica
If the device is not functioning correctly, you can restore it to factory default settings by pressing and holding the Reset button for approximately 5-10 seconds while the device is powered on.
7. Risoluzione di prublemi
- Nisun accessu à Internet:
- Check all cable connections between the modem, C200P, and your devices.
- Verify that your ISP modem is working correctly.
- Ensure the WAN port LED is active.
- Restart the modem and the C200P.
- Ùn possu accede Web Interfaccia:
- Ensure your computer is connected to a LAN port of the C200P.
- Verificate chì i paràmetri IP di u vostru urdinatore sò cunfigurati per ottene un indirizzu IP automaticamente (DHCP).
- Pruvate à svuotà a cache di u vostru navigatore o à aduprà un navigatore diversu.
- If the issue persists, perform a factory reset.
- PoE Output Not Working:
- Ensure the C200P is powered via the DC power adapter, not PoE input on the WAN port.
- Check the PoE Active LED indicator.
- Verify that the connected device is PoE compatible and within the power budget.
8. Specificazioni
| Mudellu | C200P |
| Dimensioni | 7.48 x 3.94 x 1.1 inch (190 x 100 x 28 mm) |
| Pesu | 1 pound (454 grams) |
| Porti Ethernet | 5 Gigabit Ethernet Ports (4 LAN/PoE Out, 1 WAN/PoE In) |
| Port USB | 1x Port USB 3.0 |
| Opzioni di putenza | DC Power Input (55W PoE output) or PoE Input (WAN port) |
| AP Management Capacity | Up to 200 Access Points |
| Protocolli VPN | WireGuard, OpenVPN, IPsec, ZeroTier |
Figure 8.1: Dimensions of the Cudy C200P (190x100x28 mm).
9. Garanzia è Support
Per infurmazioni nantu à a garanzia è l'assistenza tecnica, vi pregu di cunsultà u situ ufficiale di Cudy. website or contact Cudy customer service. Keep your purchase receipt for warranty claims.
Cudy ufficiale Websitu: www.cudy.com
10. Video cunnessi
Cudy Travel Router TR1200 Unboxing
This video provides an unboxing experience of the Cudy Travel Router TR1200, showcasing its compact design and features. While not the C200P, it offers insight into Cudy's product presentation and design philosophy.
Cudy Wi-Fi 6 Router WR3000 Unboxing
An unboxing video of the Cudy Wi-Fi 6 Router WR3000. This video demonstrates the physical components and initial setup steps for a Cudy router, which may be helpful for understanding the C200P's physical aspects.
Cudy Super Fast Wifi 7 AP11000 Brief Introduction
This video provides a brief introduction to the Cudy Super Fast Wifi 7 AP11000. It highlights advanced Wi-Fi features and capabilities relevant to Cudy's ecosystem, which the C200P controller can manage.
