AVATTO Smart Fingerprint Door Lock Cylinder 60mm (30/30) User Manual

1. Introduzione

This manual provides comprehensive instructions for the installation, setup, operation, and maintenance of your AVATTO Smart Fingerprint Door Lock Cylinder (Model SDL-S1-B60). Please read this manual carefully before installation and use to ensure proper function and safety. Keep this manual for future reference.

2. Informazioni di sicurezza

• Assicuratevi chì tutti i cumpunenti sianu presenti è intatti prima di l'installazione.
• Do not attempt to disassemble or modify the lock cylinder, as this may void the warranty and compromise security.
• Use only the specified 1.5V alkaline batteries. Do not mix old and new batteries or different types of batteries.
• Keep mechanical keys in a safe place outside the property.
• Protect the fingerprint sensor from sharp objects or excessive force.
• This lock is designed for indoor use. Avoid exposure to extreme weather conditions.

3. Cuntenutu di u pacchettu

Verificate chì tutti l'articuli seguenti sò inclusi in u vostru pacchettu:

• 1 x AVATTO Smart Door Lock Cylinder (60mm)
• 2 x Chiavi meccaniche
• 3 x carte RFID
• 1 x cacciavite
• 1 x User Manual (German, refer to this document for English instructions)

4. Installazione

4.1 Cuntrolli Pre-Installazione

Before proceeding with installation, ensure your door and existing lock cylinder are compatible:

• Tipu di cilindru: Confirm your existing cylinder type is compatible. This smart lock is designed to replace standard European profile cilindri.
• Cylinder Hole Size: Measure the dimensions of your door's lock cylinder hole. The required dimensions are approximately 20mm diameter, 35mm height, and 10mm width.
• Spessore di a porta: This lock is suitable for doors with a thickness between 60mm and 85mm.

4.2 Cylinder Dimensions

The smart lock cylinder has the following dimensions:

4.3 Passi di stallazione

1. Remove Existing Cylinder: Unscrew the retaining screw on the side of your door that holds the current lock cylinder in place. Insert your key and turn it slightly (about 15-20 degrees) to align the cam, then pull the cylinder out.
2. Adjust Inner Cylinder Length: The inner cylinder length is adjustable from 30mm to 55mm. Adjust it to match the inner side of your door. The outer cylinder length is fixed at 30mm.
3. Insert Smart Lock Cylinder: Insert the AVATTO Smart Lock Cylinder into the door's cylinder hole. Ensure it fits snugly and the outer fingerprint module is correctly oriented.
4. Assicurà u cilindru: Re-insert and tighten the retaining screw on the side of the door to secure the smart lock cylinder.
5. Installa Batterie: Open the battery compartment on the inner side of the lock. Insert 3 x 1.5V alkaline batteries (CR123A type recommended, not included). Ensure correct polarity.
6. Funzionalità di prova: Before closing the door, test the mechanical key and the inner knob to ensure smooth operation.

Installation typically takes about 10 minutes using a hex screwdriver (provided).

5. Setup

5.1 Smart Life App Connection

1. Scaricate l'App: Download the "Smart Life" application from your smartphone's app store (iOS or Android).
2. Registrazione/Cunnessione: Create an account or log in to your existing Smart Life account.
3. Aghjunghjite u dispositivu: In the app, tap '+' to add a new device. Select 'Security & Video Surveillance' > 'Smart Lock' or search for 'AVATTO Smart Lock'.
4. Coppia via Bluetooth: Ensure your phone's Bluetooth is enabled. The app will guide you through the pairing process. The lock uses Bluetooth protocol with an effective transmission range of 50 meters.
5. Control remoto (opcional): For remote control functionality outside the Bluetooth range (e.g., from office or on the go), an AVATTO Bluetooth Gateway (sold separately) is required. Connect the gateway to your home Wi-Fi and link it to the lock via the Smart Life app.

5.2 Aghjunghje utilizatori è sbloccare i metudi

Through the Smart Life app, you can manage various unlocking methods:

• Registrazione di l'impronta digitale: Follow the in-app instructions to register fingerprints. You will typically need to place your finger on the sensor multiple times from different angles.
• Registrazione di a carta RFID: In the app, select to add an RFID card, then present the RFID card to the lock's sensor as instructed.
• Gestione d'utilizatori: Add new users, assign specific unlocking methods (fingerprint, RFID, app), and set administration permissions.

6. Operating Instructions

6.1 Sbloccare

• Sbloccare l'impronta digitale: Pone u vostru ditu registratu nantu à u sensore d'impronte digitali. U serratura si sbloccherà se l'impronta digitale hè ricunnisciuta.
• Sbloccamentu di a carta RFID: Present a registered RFID card to the lock's sensor. The lock will unlock upon recognition.
• Smart Life App Unlock: Open the Smart Life app, select your lock, and tap the unlock button. This works via Bluetooth or remotely if a gateway is connected.
• Sbloccamentu di chjave meccanica: Insert one of the provided mechanical keys into the keyhole and turn to unlock the door.

6.2 Serratura

• Bloccu automaticu: The lock may be configured for automatic locking after a set period.
• Bloccu manuale: From the inside, turn the knob to lock the door. From the outside, the lock will automatically engage after closing, or you can manually lock it via the app.

7. Mantenimentu

7.1 Gestione di batterie

The lock requires 3 x 1.5V alkaline batteries. Batteries are not included.

• Status di a batteria: You can check the battery level through the Smart Life app interface.
• Avvisu di batteria bassa: The lock will provide an indication (e.g., sound or light) when batteries are low. Replace them promptly.
• Sustituzione di batterie: When replacing batteries, ensure the lock is in an unlocked state if possible. Open the battery compartment, remove old batteries, and insert new ones with correct polarity.

7.2 Sbloccare d'emergenza

In case of completely drained batteries, you can still access your property:

• Chjave meccanica: Use one of the provided mechanical keys to unlock the door.
• Potenza esterna: The lock features a USB port for emergency power. Connect a portable power bank to the USB port to temporarily power the lock and unlock it using a registered fingerprint, RFID card, or the app.

8. Risoluzione di prublemi

• Lock does not respond: Check battery level. Replace batteries if low. Ensure the lock is properly installed and not obstructed.
• Impronta digitale micca ricunnisciuta: Assicuratevi chì u vostru ditu sia pulitu è ​​asciuttu. Pruvate à registrà di novu a vostra impronta digitale in l'app.
• A carta RFID ùn funziona micca: Ensure the card is registered. Try re-registering the card.
• Prublemi di cunnessione di l'app: Ensure Bluetooth is enabled on your phone. If using remote control, check the AVATTO Bluetooth Gateway's connection to Wi-Fi and the lock. Restart the app or your phone.
• Motor sounds but latch doesn't move: This could indicate an obstruction or incorrect installation. Recheck the cylinder's alignment and ensure no parts are binding.
• Lock is unresponsive after battery change: Ensure batteries are inserted with correct polarity. If issues persist, contact support.

9. Specificazioni

10. Garanzia è Support

For warranty information and technical support, please refer to the documentation provided with your purchase or contact AVATTO customer service through their official website or the retailer where the product was purchased. Please have your model number (SDL-S1-B60) and purchase details ready when contacting support.