Introduzione
The Phanteks Eclipse G400A is a high-performance ATX Mid-Tower computer case designed for optimal airflow and component compatibility. Featuring a tempered glass side panel and pre-installed D-RGB fans, it offers both aesthetic appeal and efficient cooling. This manual provides detailed instructions for setting up, operating, maintaining, and troubleshooting your Eclipse G400A case.
Figure 1: Phanteks Eclipse G400A ATX Mid-Tower Computer Case (White)
Guida di installazione
1. Unpacking è Inspection
Carefully remove the computer case from its packaging. Inspect the case for any signs of damage during transit. Ensure all accessories, including screws, cable ties, and the user manual, are present.
2. Installazione di cumpunenti
The Eclipse G400A is designed for easy installation of your PC components. Follow these general steps:
- Installazione di a scheda madre: Install your ATX motherboard onto the pre-installed standoffs. Ensure proper alignment and secure it with screws. The case supports rear-side connector mainboards for a cleaner build.
- Installazione di l'unità di alimentazione (PSU): Install your PSU into the dedicated compartment at the bottom rear of the case. The case supports PSUs up to 270mm in length.
- Installazione di unità di almacenamiento: The case supports 2x 2.5" SSDs and 2x 3.5" HDDs. Utilize the dedicated storage brackets and cable management tray for a clean setup.
Figure 2: Internal layout with highlighted storage and cable management areas
- Installazione di a carta grafica (GPU): Install your graphics card into the appropriate PCIe slot. The case supports large GPU cards and includes triple mid-plate 120mm fan locations for direct GPU cooling.
- Installazione di radiatori è ventilatori: The case comes with 4x M25-140 Gen2 D-RGB fans pre-installed. It offers dedicated 360mm radiator support in the top without restrictions.
Figure 3: Top radiator support and pre-installed 140mm D-RGB fans
Figure 4: Dedicated 120mm fan positions for direct GPU cooling
3. Gestione di cavi
Utilize the dedicated cable management tool and Velcro ties provided to route and secure cables behind the motherboard tray. This ensures optimal airflow and a clean interior.
Istruzzioni di funziunamentu
1. Accensione
After connecting all internal components and external peripherals, connect the power cable to your PSU and a wall outlet. Press the power button located on the top I/O panel of the case to power on your system.
Figura 5: Disposizione di u pannellu I/O frontale
2. Cuntrollu di l'illuminazione RGB
The pre-installed M25-140 Gen2 D-RGB fans feature addressable RGB lighting. Control the lighting effects through your motherboard's RGB software (if compatible with D-RGB/ARGB) or a dedicated Phanteks RGB controller (sold separately).
Mantenimentu
1. Pulizia
Una pulizia regulare aiuta à mantene prestazioni ottimali è allunga a durata di vita di i vostri cumpunenti.
- Filtri di polvere: The Eclipse G400A features ultra-fine performance mesh panels on the top, left, and right sides, acting as dust filters. Regularly remove and clean these filters using compressed air or a soft brush to prevent dust buildup.
- Esternu: Asciugà e superfici esterne cun un soffiu, damp pannu. Evitate detergenti abrasivi o solventi.
Figure 6: Removable front mesh panel and dust filter for easy cleaning
Figure 7: Disassembled panels demonstrating airflow and access for cleaning
2. Ottimizazione di u flussu d'aria
Ensure cables are neatly managed to avoid obstructing airflow. Periodically check fan operation to ensure they are spinning freely and quietly.
Risoluzione di prublemi
- U sistema ùn s'accende micca:
- Check all power connections, including the PSU to wall outlet, PSU to motherboard (24-pin and CPU 8-pin), and front panel power switch header.
- Assicuratevi chì l'interruttore PSU sia in a pusizione "ON".
- I ventilatori ùn giranu micca / L'RGB ùn s'illumina micca:
- Verify fan and RGB cables are correctly connected to the motherboard headers or a dedicated RGB controller.
- Check motherboard BIOS/UEFI settings for fan control and RGB settings.
- Poor Airflow / High Temperatures:
- Clean all dust filters and fans.
- Ensure proper cable management to avoid airflow obstruction.
- Verify fan orientation (intake/exhaust) for optimal airflow path.
Specificazioni tecniche
| Feature | Specificazione |
|---|---|
| Marca | Phanteks |
| Nome di mudellu | Eclipse G400A |
| Tipu di casu | Mid Tower |
| Culore | Biancu |
| Materiale | Acciaio inossidabile, vetru temperatu |
| Dimensioni (LxPxH) | 19.48"P x 9.05"L x 20.55"A (49.48 x 22.99 x 52.20 cm) |
| Pesu di l'articulu | 19 Libbra (8.62 kg) |
| Fans preinstallati | 4x M25-140 Gen2 D-RGB 140mm Fans |
| Supportu di radiatori | Finu à 360mm (Top) |
| Supportu di Storage | 2x SSD 2.5", 2x HDD 3.5" |
| I/O frontale | USB-C 3.2 Gen 2, 2x USB 3.0, Audio/Microphone, Power Button, Reset Button |
Garanzia è Supportu
Phanteks products are manufactured to the highest quality standards. For warranty information and technical support, please refer to the official Phanteks websitu o cuntattate direttamente u so serviziu clienti. Conservate a vostra prova d'acquistu per e richieste di garanzia.
Per più assistenza, visitate a pagina ufficiale di supportu di Phanteks: www.phanteks.com/support.html
