IQ PANEL-LOGO

IQ PANEL PG9938 Pulsante di Panicu Remotu

IQ-PANEL-PG9938-Remote-Panic-Button-PROSDUDCT

Specificazioni

  • Nome di u produttu: PG9938 Pulsante di panicu remotu
  • Compatibilità: IQ Panel 4 v4.5.2 è superiore
  • Functionality: Enrolled as audible or silent medical, or audible or silent intrusion alarm activation

IQ Panel 4 v4.5.2 è versioni successive

U buttone di panicu remotu PG9938 pò esse registratu in un pannellu IQ4 cum'è attivazione d'allarme d'intrusione audibile o silenziosa per u sistema.

Prucessu di iscrizzione:

Appughjà è tene premutu IQ-PANEL-PG9938-Remote-Panic-Button (2)button of the fob until the keyfob’s LED flashes amber

IQ-PANEL-PG9938-Remote-Panic-Button (3)Tech Tip: If the LED flashes only once after holding for 10 seconds, or if it flashes multiple times the keyfob may have been enrolled into another panel.
Rilascia u buttone IQ-PANEL-PG9938-Remote-Panic-Button (2)and press and hold again.

Prugrammazione:

Settings > Advanced Settings > Installation > Devices > Security Sensors > Auto Learn Sensor
Appughjà è mantene u buttoneIQ-PANEL-PG9938-Remote-Panic-Button (2) of the fob until the keyfob’s LED flashes amber

Program the ‘Sensor Group’, ‘Sensor Name’ and ‘Voice Prompts’ as needed.
Selezziunate "AGGIUNGI NOVU".

IQ-PANEL-PG9938-Remote-Panic-Button (4)

Tech Tip: Do not program the PG9938 as a Fixed sensor group.

Select only:

  • 1 – Mobile Intrusion
  • 3 – Mobile Silent
  • 6 – Mobile Auxiliary
  • 7 – Mobile Silent Auxiliary
  • 25 – Safety Auxiliary Pendent (non-alarm)
  • (Set ‘Voice Prompts’ to OFF for no zone status annunciation)
  • Sè un gruppu di sensori fissi hè utilizatu, a zona pò avè prublemi di supervisione dopu chì a finestra di supervisione hè scaduta (predefinitu 24 ore).
  • Quandu si verifica un prublema di supervisione, a tabulazione Storia sottu Impostazioni > Status mostrerà "Fallimentu" cù una data è ora.amp di a perdita di supervisione.
  • In addition, the device tray on the arming page will show a  for the zone. IQ-PANEL-PG9938-Remote-Panic-Button (5)

Operazioni di buttone

IQ-PANEL-PG9938-Remote-Panic-Button (1)

FAQ

What should I do if the LED on the keyfob flashes only once or multiple times during enrollment?

If the LED flashes only once after holding for 10 seconds or multiple times, it may indicate that the keyfob has been enrolled in another panel. Release the button and try enrolling again.

Documenti / Risorse

IQ PANEL PG9938 Pulsante di Panicu Remotu [pdfManuale d'istruzzioni
PG9938, PG9938 Buttone di Panicu Remotu, Buttone di Panicu Remotu, Buttone di Panicu, Buttone

Referenze

Lascia un cumentu

U vostru indirizzu email ùn serà micca publicatu. I campi obbligatori sò marcati *