Roth-logo

Roth QuickTemp Compact System

Roth-QuickTemp-Compact-System-Product

Specificazioni di u produttu

  • Dimensioni: 61 cm x 61 cm x 40 cm
  • Maximum load: 2mm per meter
  • Assemblea necessaria

Roth-QuickTemp-Compact-System-Fig- (1)

Planlæg hvordan Compact pladerne skal udlægges. OBS. Roth-QuickTemp-Compact-System-Fig- (2)

Roth-QuickTemp-Compact-System-Fig- (3)  Always read the full documentation

Roth-QuickTemp-Compact-System-Fig- (4)Aspirate u sottopavimentu. Roth-QuickTemp-Compact-System-Fig- (5)

Split the turn plate and lay it first.

Roth-QuickTemp-Compact-System-Fig- (6)

I solchi trà e piastre devenu esse allineati.

Roth-QuickTemp-Compact-System-Fig- (7)

Cut plates from the back, remove any burrs.

Roth-QuickTemp-Compact-System-Fig- (8)

Aduprate piastre di trasferimentu per i tubi di alimentazione / per riempie i spazii vuoti.

Roth-QuickTemp-Compact-System-Fig- (9)

Vacuum before installation of pipes.

Roth-QuickTemp-Compact-System-Fig- (10)

Installate u tubu strettu / vicinu à u cerchju internu in giri.

Roth-QuickTemp-Compact-System-Fig- (11)

Installate i tubi è eseguite una prova di pressione.

Roth-QuickTemp-Compact-System-Fig- (12)

Vacuum before installation of flooring underlayment

Roth-QuickTemp-Compact-System-Fig- (13)

Flooring underlayment. Avoid overlapping.Roth-QuickTemp-Compact-System-Fig- (14)Lay wood floor at a 90° angle to pipes.

Passi di stallazione

  1. Place component A on a flat surface with dimensions 61 cm x 61 cm.
  2. Attach component B to component A using the provided screws (X mm).
  3. Ensure that the maximum load of 2mm per meter is not exceeded.
  4. Connect component C to the assembly following the designated markings.
  5. Secure all components in place as per the assembly diagram.
  6. Continue adding components in the specified order until the structure is complete.
  7. Check for stability and make adjustments if necessary.
  8. Your product is now ready for use!

FAQs

Chì ghjè a capacità di carica massima di u pruduttu?

The maximum load capacity is 2mm per meter.

Aghju bisognu di strumenti supplementari per l'assemblea?

The assembly requires screws (X mm) provided with the product. No additional tools are necessary.

U pruduttu pò esse disassemblatu per u almacenamentu?

Yes, the product can be disassembled following the reverse order of the installation steps.

Documenti / Risorse

Roth QuickTemp Compact System [pdfGuida d'installazione
QuickTemp Compact System, QuickTemp, Compact System, System

Referenze

Lascia un cumentu

U vostru indirizzu email ùn serà micca publicatu. I campi obbligatori sò marcati *